[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31.6 (root@serveerstertje) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Sun Dec 13 23:35:36 CET 2009 [ 0.000000] Command line: root=/dev/mapper/serveerstertje-root ro console=hvc0 console=tty1 earlyprintk=xen max_loop=255 pciback.hide=(00:07.0)(06:01.0)(06:01.1)(06:01.2)(01:08.0)(01:08.1)(01:08.2)(01:0a.0) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] xen_release_chunk: looking at area pfn 30000-afee0 [ 0.000000] xen_release_chunk: looking at area pfn aff00-b0000 [ 0.000000] xen_release_chunk: looking at area pfn c0000-f0000 [ 0.000000] xen_release_chunk: looking at area pfn f4000-fec00 [ 0.000000] released 0 pages of unused memory [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] Xen: 000000000009f000 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 0000000030000000 (usable) [ 0.000000] Xen: 00000000afee0000 - 00000000afee3000 (ACPI NVS) [ 0.000000] Xen: 00000000afee3000 - 00000000afef0000 (ACPI data) [ 0.000000] Xen: 00000000afef0000 - 00000000aff00000 (reserved) [ 0.000000] Xen: 00000000b0000000 - 00000000c0000000 (reserved) [ 0.000000] Xen: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] Xen: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] console [xenboot0] enabled [ 0.000000] DMI 2.5 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x30000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 0000000030000000 (usable) [ 0.000000] modified: 00000000afee0000 - 00000000afee3000 (ACPI NVS) [ 0.000000] modified: 00000000afee3000 - 00000000afef0000 (ACPI data) [ 0.000000] modified: 00000000afef0000 - 00000000aff00000 (reserved) [ 0.000000] modified: 00000000b0000000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000030000000 [ 0.000000] 0000000000 - 0030000000 page 4k [ 0.000000] kernel direct mapping tables up to 30000000 @ 100000-282000 [ 0.000000] RAMDISK: 01aca000 - 02094000 [ 0.000000] ACPI: RSDP 00000000000f7550 00024 (v02 Nvidia) [ 0.000000] ACPI: XSDT 00000000afee3100 0004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 00000000afeed3c0 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 20090521 tbfadt-558 [ 0.000000] ACPI: DSDT 00000000afee3280 0A0D8 (v01 NVIDIA ASUSACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000afee0a80 00040 [ 0.000000] ACPI: SSDT 00000000afeed600 0028A (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 00000000afeed900 00038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG 00000000afeed980 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 00000000afeed500 0008E (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0030000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0002215000 - 000222a000] XEN PAGETABLES ==> [0002215000 - 000222a000] [ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #3 [0001000000 - 0001aa9574] TEXT DATA BSS ==> [0001000000 - 0001aa9574] [ 0.000000] #4 [0001aca000 - 0002094000] RAMDISK ==> [0001aca000 - 0002094000] [ 0.000000] #5 [0002094000 - 0002215000] XEN START INFO ==> [0002094000 - 0002215000] [ 0.000000] #6 [0001aaa000 - 0001aaa151] BRK ==> [0001aaa000 - 0001aaa151] [ 0.000000] #7 [0000100000 - 000026a000] PGTABLE ==> [0000100000 - 000026a000] [ 0.000000] found SMP MP-table at [ffff8800000f59c0] f59c0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00030000 [ 0.000000] On node 0 totalpages: 196495 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 365 pages reserved [ 0.000000] DMA zone: 3562 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 2632 pages used for memmap [ 0.000000] DMA32 zone: 189880 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 30000000:7fee0000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Allocated 22 4k pages, static data 88160 bytes [ 0.000000] trying to map vcpu_info 0 at ffffc9000000b060, mfn 1f6241, offset 96 [ 0.000000] cpu 0 using vcpu_info at ffffc9000000b060 [ 0.000000] trying to map vcpu_info 1 at ffffc90000023060, mfn 1f6257, offset 96 [ 0.000000] cpu 1 using vcpu_info at ffffc90000023060 [ 0.000000] Xen: using vcpu_info placement [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 193442 [ 0.000000] Kernel command line: root=/dev/mapper/serveerstertje-root ro console=hvc0 console=tty1 earlyprintk=xen max_loop=255 pciback.hide=(00:07.0)(06:01.0)(06:01.1)(06:01.2)(01:08.0)(01:08.1)(01:08.2)(01:0a.0) [ 0.000000] Unknown boot option `pciback.hide=(00:07.0)(06:01.0)(06:01.1)(06:01.2)(01:08.0)(01:08.1)(01:08.2)(01:0a.0)': ignoring [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] PCI-DMA: Using Xen software bounce buffering for IO (Xen-SWIOTLB) [ 0.000000] xen_swiotlb_fixup: buf=ffff8800030ab000 size=67108864 [ 0.000000] xen_swiotlb_fixup: buf=ffff88000710b000 size=32768 [ 0.000000] Placing 64MB Xen software IO TLB between ffff8800030ab000 - ffff8800070ab000 [ 0.000000] Xen software IO TLB at phys 0x30ab000 - 0x70ab000 [ 0.000000] Memory: 686848k/786432k available (5640k kernel code, 452k absent, 98460k reserved, 3626k data, 528k init) [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] xen: registering gsi 0 triggering 1 polarity 0 [ 0.000000] xen: --> irq=0 [ 0.000000] xen_set_ioapic_routing: irq 0 gsi 0 vector 0 ioapic 0 pin 0 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 1 triggering 1 polarity 0 [ 0.000000] xen: --> irq=1 [ 0.000000] xen_set_ioapic_routing: irq 1 gsi 1 vector 1 ioapic 0 pin 1 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 3 triggering 1 polarity 0 [ 0.000000] xen: --> irq=3 [ 0.000000] xen_set_ioapic_routing: irq 3 gsi 3 vector 3 ioapic 0 pin 3 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 4 triggering 1 polarity 0 [ 0.000000] xen: --> irq=4 [ 0.000000] xen_set_ioapic_routing: irq 4 gsi 4 vector 4 ioapic 0 pin 4 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 5 triggering 1 polarity 0 [ 0.000000] xen: --> irq=5 [ 0.000000] xen_set_ioapic_routing: irq 5 gsi 5 vector 5 ioapic 0 pin 5 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 6 triggering 1 polarity 0 [ 0.000000] xen: --> irq=6 [ 0.000000] xen_set_ioapic_routing: irq 6 gsi 6 vector 6 ioapic 0 pin 6 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 7 triggering 1 polarity 0 [ 0.000000] xen: --> irq=7 [ 0.000000] xen_set_ioapic_routing: irq 7 gsi 7 vector 7 ioapic 0 pin 7 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 8 triggering 1 polarity 0 [ 0.000000] xen: --> irq=8 [ 0.000000] xen_set_ioapic_routing: irq 8 gsi 8 vector 8 ioapic 0 pin 8 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 9 triggering 0 polarity 0 [ 0.000000] xen: --> irq=9 [ 0.000000] xen_set_ioapic_routing: irq 9 gsi 9 vector 9 ioapic 0 pin 9 triggering 1 polarity 0 [ 0.000000] xen: registering gsi 10 triggering 1 polarity 0 [ 0.000000] xen: --> irq=10 [ 0.000000] xen_set_ioapic_routing: irq 10 gsi 10 vector 10 ioapic 0 pin 10 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 11 triggering 1 polarity 0 [ 0.000000] xen: --> irq=11 [ 0.000000] xen_set_ioapic_routing: irq 11 gsi 11 vector 11 ioapic 0 pin 11 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 12 triggering 1 polarity 0 [ 0.000000] xen: --> irq=12 [ 0.000000] xen_set_ioapic_routing: irq 12 gsi 12 vector 12 ioapic 0 pin 12 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 13 triggering 1 polarity 0 [ 0.000000] xen: --> irq=13 [ 0.000000] xen_set_ioapic_routing: irq 13 gsi 13 vector 13 ioapic 0 pin 13 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 14 triggering 1 polarity 0 [ 0.000000] xen: --> irq=14 [ 0.000000] xen_set_ioapic_routing: irq 14 gsi 14 vector 14 ioapic 0 pin 14 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 15 triggering 1 polarity 0 [ 0.000000] xen: --> irq=15 [ 0.000000] xen_set_ioapic_routing: irq 15 gsi 15 vector 15 ioapic 0 pin 15 triggering 0 polarity 0 [ 0.000000] Detected 2500.002 MHz processor. [ 0.000999] Console: colour VGA+ 80x25 [ 0.000999] console handover: boot [xenboot0] -> real [tty1] [ 0.000999] console [hvc0] enabled [ 0.000999] Xen: using vcpuop timer interface [ 0.000999] installing Xen timer for CPU 0 [ 0.000999] alloc irq_desc for 423 on node 0 [ 0.000999] alloc kstat_irqs on node 0 [ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 5000.00 BogoMIPS (lpj=2500002) [ 0.000999] Security Framework initialized [ 0.000999] SELinux: Initializing. [ 0.000999] SELinux: Starting in permissive mode [ 0.000999] Mount-cache hash table entries: 256 [ 0.001191] Initializing cgroup subsys ns [ 0.001396] Initializing cgroup subsys cpuacct [ 0.001599] Initializing cgroup subsys freezer [ 0.001823] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.002004] CPU: L2 Cache: 512K (64 bytes/line) [ 0.002207] tseg: 00aff00000 [ 0.002210] CPU: Physical Processor ID: 0 [ 0.002409] CPU: Processor Core ID: 0 [ 0.002636] mce: CPU supports 5 MCE banks [ 0.002855] Performance Counters: AMD PMU driver. [ 0.002999] ------------[ cut here ]------------ [ 0.002999] WARNING: at /usr/src/xen-unstable.hg/linux-2.6-pvops.git/arch/x86/xen/enlighten.c:720 xen_apic_write+0x15/0x17() [ 0.002999] Hardware name: System Product Name [ 0.002999] Modules linked in: [ 0.002999] Pid: 0, comm: swapper Not tainted 2.6.31.6 #1 [ 0.002999] Call Trace: [ 0.002999] [] ? xen_apic_write+0x15/0x17 [ 0.002999] [] warn_slowpath_common+0x77/0xa4 [ 0.002999] [] warn_slowpath_null+0xf/0x11 [ 0.002999] [] xen_apic_write+0x15/0x17 [ 0.002999] [] perf_counters_lapic_init+0x2e/0x30 [ 0.002999] [] init_hw_perf_counters+0x305/0x3a2 [ 0.002999] [] ? xen_restore_fl_direct_end+0x0/0x1 [ 0.002999] [] ? kmem_cache_alloc+0xcb/0x12d [ 0.002999] [] identify_boot_cpu+0x3c/0x3e [ 0.002999] [] check_bugs+0x9/0x2d [ 0.002999] [] start_kernel+0x41d/0x432 [ 0.002999] [] x86_64_start_reservations+0xaa/0xae [ 0.002999] [] xen_start_kernel+0x633/0x63a [ 0.002999] ---[ end trace 4eaa2a86a8e2da22 ]--- [ 0.002999] ... version: 0 [ 0.002999] ... bit width: 48 [ 0.002999] ... generic counters: 4 [ 0.002999] ... value mask: 0000ffffffffffff [ 0.002999] ... max period: 00007fffffffffff [ 0.002999] ... fixed-purpose counters: 0 [ 0.002999] ... counter mask: 000000000000000f [ 0.002999] SMP alternatives: switching to UP code [ 0.002999] ACPI: Core revision 20090521 [ 0.023106] alloc irq_desc for 422 on node 0 [ 0.023110] alloc kstat_irqs on node 0 [ 0.023121] alloc irq_desc for 421 on node 0 [ 0.023124] alloc kstat_irqs on node 0 [ 0.023131] alloc irq_desc for 420 on node 0 [ 0.023133] alloc kstat_irqs on node 0 [ 0.023139] alloc irq_desc for 419 on node 0 [ 0.023141] alloc kstat_irqs on node 0 [ 0.023330] installing Xen timer for CPU 1 [ 0.023539] alloc irq_desc for 418 on node 0 [ 0.023541] alloc kstat_irqs on node 0 [ 0.023580] SMP alternatives: switching to SMP code [ 0.023996] alloc irq_desc for 417 on node 0 [ 0.023996] alloc kstat_irqs on node 0 [ 0.024012] alloc irq_desc for 416 on node 0 [ 0.024015] alloc kstat_irqs on node 0 [ 0.024021] alloc irq_desc for 415 on node 0 [ 0.024024] alloc kstat_irqs on node 0 [ 0.024030] alloc irq_desc for 414 on node 0 [ 0.024033] alloc kstat_irqs on node 0 [ 0.000020] Initializing CPU#1 [ 0.000081] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.000084] CPU: L2 Cache: 512K (64 bytes/line) [ 0.000087] CPU: Physical Processor ID: 0 [ 0.000089] CPU: Processor Core ID: 1 [ 0.000092] mce: CPU supports 5 MCE banks [ 0.024187] Brought up 2 CPUs [ 0.025173] Booting paravirtualized kernel on Xen [ 0.025209] Xen version: 4.0.0-rc1-pre (preserve-AD) (dom0) [ 0.026035] Grant tables using version 2 layout. [ 0.026259] Grant table initialized [ 0.026534] Time: 8:55:02 Date: 12/14/09 [ 0.026801] NET: Registered protocol family 16 [ 0.027067] alloc irq_desc for 413 on node 0 [ 0.027067] alloc kstat_irqs on node 0 [ 0.027110] xenbus_probe_init ok [ 0.028051] node 0 link 0: io port [9000, ffff] [ 0.028051] TOM: 00000000c0000000 aka 3072M [ 0.028255] node 0 link 0: mmio [a0000, bffff] [ 0.028261] node 0 link 0: mmio [c0000000, efffffff] [ 0.028268] node 0 link 0: mmio [f4000000, fe02ffff] [ 0.028274] node 0 link 0: mmio [f0000000, f07fffff] [ 0.028280] TOM2: 0000000200000000 aka 8192M [ 0.028481] bus: [00,07] on node 0 link 0 [ 0.028484] bus: 00 index 0 io port: [0, ffff] [ 0.028487] bus: 00 index 1 mmio: [a0000, bffff] [ 0.028491] bus: 00 index 2 mmio: [c0000000, f3ffffff] [ 0.028494] bus: 00 index 3 mmio: [f4000000, ffffffff] [ 0.028497] bus: 00 index 4 mmio: [200000000, fcffffffff] [ 0.028515] ACPI: bus type pci registered [ 0.028734] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.028734] PCI: MCFG area at f0000000 reserved in E820 [ 0.044844] PCI: Using MMCONFIG at f0000000 - f3ffffff [ 0.044993] PCI: Using configuration type 1 for base access [ 0.061077] bio: create slab at 0 [ 0.066074] ACPI: EC: Look up EC in DSDT [ 0.089949] ACPI: Interpreter enabled [ 0.089986] ACPI: (supports S0 S1 S3 S4 S5) [ 0.089986] ACPI: Using IOAPIC for interrupt routing [ 0.127184] ACPI: No dock devices found. [ 0.127896] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.128428] pci 0000:00:01.1: reg 10 io port: [0xff00-0xff3f] [ 0.128456] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f] [ 0.128466] pci 0000:00:01.1: reg 24 io port: [0x1c40-0x1c7f] [ 0.128505] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.128715] pci 0000:00:01.1: PME# disabled [ 0.129092] pci 0000:00:01.3: reg 10 32bit mmio: [0xfdf80000-0xfdffffff] [ 0.129318] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff] [ 0.129380] pci 0000:00:02.0: supports D1 D2 [ 0.129383] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.129592] pci 0000:00:02.0: PME# disabled [ 0.129845] pci 0000:00:02.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff] [ 0.129918] pci 0000:00:02.1: supports D1 D2 [ 0.129921] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.129980] pci 0000:00:02.1: PME# disabled [ 0.130036] pci 0000:00:04.0: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff] [ 0.130098] pci 0000:00:04.0: supports D1 D2 [ 0.130101] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.130310] pci 0000:00:04.0: PME# disabled [ 0.130564] pci 0000:00:04.1: reg 10 32bit mmio: [0xfe02c000-0xfe02c0ff] [ 0.130636] pci 0000:00:04.1: supports D1 D2 [ 0.130639] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.130848] pci 0000:00:04.1: PME# disabled [ 0.131058] pci 0000:00:06.0: reg 20 io port: [0xfc00-0xfc0f] [ 0.131140] pci 0000:00:07.0: reg 10 32bit mmio: [0xfe020000-0xfe023fff] [ 0.131203] pci 0000:00:07.0: PME# supported from D3hot D3cold [ 0.131418] pci 0000:00:07.0: PME# disabled [ 0.131777] pci 0000:00:09.0: reg 10 io port: [0x9f0-0x9f7] [ 0.131785] pci 0000:00:09.0: reg 14 io port: [0xbf0-0xbf3] [ 0.131794] pci 0000:00:09.0: reg 18 io port: [0x970-0x977] [ 0.131803] pci 0000:00:09.0: reg 1c io port: [0xb70-0xb73] [ 0.131811] pci 0000:00:09.0: reg 20 io port: [0xf700-0xf70f] [ 0.131820] pci 0000:00:09.0: reg 24 32bit mmio: [0xfe026000-0xfe027fff] [ 0.131935] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff] [ 0.131944] pci 0000:00:0a.0: reg 14 io port: [0xf600-0xf607] [ 0.131953] pci 0000:00:0a.0: reg 18 32bit mmio: [0xfe02a000-0xfe02a0ff] [ 0.131962] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xfe029000-0xfe02900f] [ 0.131979] pci 0000:00:0a.0: supports D1 D2 [ 0.131979] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.131979] pci 0000:00:0a.0: PME# disabled [ 0.132072] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.132306] pci 0000:00:0b.0: PME# disabled [ 0.132797] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.132979] pci 0000:00:10.0: PME# disabled [ 0.133259] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.133476] pci 0000:00:12.0: PME# disabled [ 0.133979] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.133979] pci 0000:00:13.0: PME# disabled [ 0.134257] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.134470] pci 0000:00:14.0: PME# disabled [ 0.135065] pci 0000:01:08.0: reg 20 io port: [0xec00-0xec1f] [ 0.135109] pci 0000:01:08.0: supports D1 D2 [ 0.135112] pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.135321] pci 0000:01:08.0: PME# disabled [ 0.135620] pci 0000:01:08.1: reg 20 io port: [0xe800-0xe81f] [ 0.135664] pci 0000:01:08.1: supports D1 D2 [ 0.135667] pci 0000:01:08.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.135876] pci 0000:01:08.1: PME# disabled [ 0.136025] pci 0000:01:08.2: reg 10 32bit mmio: [0xfdeff000-0xfdeff0ff] [ 0.136098] pci 0000:01:08.2: supports D1 D2 [ 0.136101] pci 0000:01:08.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.136310] pci 0000:01:08.2: PME# disabled [ 0.136572] pci 0000:01:0a.0: reg 10 32bit mmio: [0xfdefe000-0xfdefefff] [ 0.136644] pci 0000:01:0a.0: supports D1 D2 [ 0.136647] pci 0000:01:0a.0: PME# supported from D0 D1 D2 D3hot [ 0.136880] pci 0000:01:0a.0: PME# disabled [ 0.137030] pci 0000:00:08.0: transparent bridge [ 0.137235] pci 0000:00:08.0: bridge io port: [0xe000-0xefff] [ 0.137241] pci 0000:00:08.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 0.137247] pci 0000:00:08.0: bridge 32bit mmio pref: [0xfdd00000-0xfddfffff] [ 0.137301] pci 0000:02:00.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff] [ 0.137315] pci 0000:02:00.0: reg 14 64bit mmio: [0xd8000000-0xdfffffff] [ 0.137329] pci 0000:02:00.0: reg 1c 64bit mmio: [0xe6000000-0xe7ffffff] [ 0.137338] pci 0000:02:00.0: reg 24 io port: [0xdc00-0xdc7f] [ 0.137346] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.137440] pci 0000:00:0b.0: bridge io port: [0xd000-0xdfff] [ 0.137446] pci 0000:00:0b.0: bridge 32bit mmio: [0xfb000000-0xfcffffff] [ 0.137455] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xd8000000-0xe7ffffff] [ 0.137558] pci 0000:00:10.0: bridge io port: [0xc000-0xcfff] [ 0.137568] pci 0000:00:10.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff] [ 0.137587] pci 0000:00:10.0: bridge 64bit mmio pref: [0xfdb00000-0xfdbfffff] [ 0.137691] pci 0000:00:12.0: bridge io port: [0xb000-0xbfff] [ 0.137702] pci 0000:00:12.0: bridge 32bit mmio: [0xfda00000-0xfdafffff] [ 0.137721] pci 0000:00:12.0: bridge 64bit mmio pref: [0xfd900000-0xfd9fffff] [ 0.137877] pci 0000:05:00.0: supports D1 D2 [ 0.137978] pci 0000:00:13.0: bridge io port: [0xa000-0xafff] [ 0.137978] pci 0000:00:13.0: bridge 32bit mmio: [0xfd800000-0xfd8fffff] [ 0.137978] pci 0000:00:13.0: bridge 64bit mmio pref: [0xfd700000-0xfd7fffff] [ 0.138066] pci 0000:06:01.0: reg 10 32bit mmio: [0xfd8ff000-0xfd8fffff] [ 0.138168] pci 0000:06:01.0: supports D1 D2 [ 0.138171] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot [ 0.138381] pci 0000:06:01.0: PME# disabled [ 0.138650] pci 0000:06:01.1: reg 10 32bit mmio: [0xfd8fe000-0xfd8fefff] [ 0.138753] pci 0000:06:01.1: supports D1 D2 [ 0.138756] pci 0000:06:01.1: PME# supported from D0 D1 D2 D3hot [ 0.138965] pci 0000:06:01.1: PME# disabled [ 0.139042] pci 0000:06:01.2: reg 10 32bit mmio: [0xfd8fd000-0xfd8fd0ff] [ 0.139143] pci 0000:06:01.2: supports D1 D2 [ 0.139146] pci 0000:06:01.2: PME# supported from D0 D1 D2 D3hot [ 0.139381] pci 0000:06:01.2: PME# disabled [ 0.139703] pci 0000:05:00.0: bridge io port: [0xa000-0xafff] [ 0.139711] pci 0000:05:00.0: bridge 32bit mmio: [0xfd800000-0xfd8fffff] [ 0.139723] pci 0000:05:00.0: bridge 64bit mmio pref: [0xfd700000-0xfd7fffff] [ 0.139830] pci 0000:07:00.0: reg 10 32bit mmio: [0xfd6e0000-0xfd6fffff] [ 0.139845] pci 0000:07:00.0: reg 14 32bit mmio: [0xfd6c0000-0xfd6dffff] [ 0.139859] pci 0000:07:00.0: reg 18 io port: [0x9c00-0x9c1f] [ 0.139907] pci 0000:07:00.0: reg 30 32bit mmio: [0xfd6a0000-0xfd6bffff] [ 0.139972] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.139978] pci 0000:07:00.0: PME# disabled [ 0.140068] pci 0000:00:14.0: bridge io port: [0x9000-0x9fff] [ 0.140079] pci 0000:00:14.0: bridge 32bit mmio: [0xfd600000-0xfd6fffff] [ 0.140098] pci 0000:00:14.0: bridge 64bit mmio pref: [0xfd500000-0xfd5fffff] [ 0.140179] pci_bus 0000:00: on NUMA node 0 [ 0.140187] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.140934] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.318004] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.318949] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.318951] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.318951] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 *10 11 14 15) [ 0.318951] ACPI: PCI Interrupt Link [LE0A] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.318951] ACPI: PCI Interrupt Link [LE0B] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.318951] ACPI: PCI Interrupt Link [LE0C] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.318951] ACPI: PCI Interrupt Link [LE0D] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.318951] ACPI: PCI Interrupt Link [LE1A] (IRQs 5 7 9 *10 11 14 15) [ 0.318951] ACPI: PCI Interrupt Link [LE1B] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.318951] ACPI: PCI Interrupt Link [LE1C] (IRQs 5 *7 9 10 11 14 15) [ 0.318951] ACPI: PCI Interrupt Link [LE1D] (IRQs *5 7 9 10 11 14 15) [ 0.319220] ACPI: PCI Interrupt Link [LE2A] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.320111] ACPI: PCI Interrupt Link [LE2B] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.321001] ACPI: PCI Interrupt Link [LE2C] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.321946] ACPI: PCI Interrupt Link [LE2D] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.322058] ACPI: PCI Interrupt Link [LE3A] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.322951] ACPI: PCI Interrupt Link [LE3B] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.322951] ACPI: PCI Interrupt Link [LE3C] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.322951] ACPI: PCI Interrupt Link [LE3D] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.322951] ACPI: PCI Interrupt Link [LE4A] (IRQs 5 7 9 *10 11 14 15) [ 0.323178] ACPI: PCI Interrupt Link [LE4B] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.324068] ACPI: PCI Interrupt Link [LE4C] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.324965] ACPI: PCI Interrupt Link [LE4D] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.325912] ACPI: PCI Interrupt Link [LE5A] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.325951] ACPI: PCI Interrupt Link [LE5B] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.325951] ACPI: PCI Interrupt Link [LE5C] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.326061] ACPI: PCI Interrupt Link [LE5D] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.326951] ACPI: PCI Interrupt Link [LE6A] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.326951] ACPI: PCI Interrupt Link [LE6B] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.326951] ACPI: PCI Interrupt Link [LE6C] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.326951] ACPI: PCI Interrupt Link [LE6D] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.326951] ACPI: PCI Interrupt Link [LE7A] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.326951] ACPI: PCI Interrupt Link [LE7B] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.326951] ACPI: PCI Interrupt Link [LE7C] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.326951] ACPI: PCI Interrupt Link [LE7D] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.326951] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.326951] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 *7 9 10 11 14 15) [ 0.327226] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.328118] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.329010] ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.329951] ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.330060] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15) [ 0.330774] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) [ 0.330951] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 *11 14 15) [ 0.330951] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.330951] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.330951] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) [ 0.331265] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.331938] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.331951] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 0.331951] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 [ 0.331951] ACPI: PCI Interrupt Link [AE0A] (IRQs 16) *0, disabled. [ 0.331951] ACPI: PCI Interrupt Link [AE0B] (IRQs 16) *0, disabled. [ 0.331951] ACPI: PCI Interrupt Link [AE0C] (IRQs 16) *0, disabled. [ 0.331951] ACPI: PCI Interrupt Link [AE0D] (IRQs 16) *0, disabled. [ 0.331951] ACPI: PCI Interrupt Link [AE1A] (IRQs 16) *0 [ 0.331951] ACPI: PCI Interrupt Link [AE1B] (IRQs 16) *0, disabled. [ 0.331951] ACPI: PCI Interrupt Link [AE1C] (IRQs 16) *0 [ 0.331951] ACPI: PCI Interrupt Link [AE1D] (IRQs 16) *0 [ 0.331951] ACPI: PCI Interrupt Link [AE2A] (IRQs 16) *0, disabled. [ 0.331951] ACPI: PCI Interrupt Link [AE2B] (IRQs 16) *0, disabled. [ 0.331951] ACPI: PCI Interrupt Link [AE2C] (IRQs 16) *0, disabled. [ 0.331951] ACPI: PCI Interrupt Link [AE2D] (IRQs 16) *0, disabled. [ 0.331951] ACPI: PCI Interrupt Link [AE3A] (IRQs 16) *0, disabled. [ 0.331951] ACPI: PCI Interrupt Link [AE3B] (IRQs 16) *0, disabled. [ 0.331951] ACPI: PCI Interrupt Link [AE3C] (IRQs 16) *0, disabled. [ 0.332130] ACPI: PCI Interrupt Link [AE3D] (IRQs 16) *0, disabled. [ 0.332803] ACPI: PCI Interrupt Link [AE4A] (IRQs 16) *0 [ 0.332951] ACPI: PCI Interrupt Link [AE4B] (IRQs 16) *0, disabled. [ 0.332951] ACPI: PCI Interrupt Link [AE4C] (IRQs 16) *0, disabled. [ 0.332951] ACPI: PCI Interrupt Link [AE4D] (IRQs 16) *0, disabled. [ 0.332951] ACPI: PCI Interrupt Link [AE5A] (IRQs 16) *0, disabled. [ 0.332951] ACPI: PCI Interrupt Link [AE5B] (IRQs 16) *0, disabled. [ 0.332951] ACPI: PCI Interrupt Link [AE5C] (IRQs 16) *0, disabled. [ 0.332951] ACPI: PCI Interrupt Link [AE5D] (IRQs 16) *0, disabled. [ 0.332951] ACPI: PCI Interrupt Link [AE6A] (IRQs 16) *0, disabled. [ 0.332951] ACPI: PCI Interrupt Link [AE6B] (IRQs 16) *0, disabled. [ 0.332951] ACPI: PCI Interrupt Link [AE6C] (IRQs 16) *0, disabled. [ 0.332951] ACPI: PCI Interrupt Link [AE6D] (IRQs 16) *0, disabled. [ 0.332951] ACPI: PCI Interrupt Link [AE7A] (IRQs 16) *0, disabled. [ 0.332951] ACPI: PCI Interrupt Link [AE7B] (IRQs 16) *0, disabled. [ 0.332951] ACPI: PCI Interrupt Link [AE7C] (IRQs 16) *0, disabled. [ 0.332951] ACPI: PCI Interrupt Link [AE7D] (IRQs 16) *0, disabled. [ 0.332951] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0 [ 0.332951] ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0, disabled. [ 0.332951] ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0, disabled. [ 0.333104] ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0, disabled. [ 0.333878] ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0, disabled. [ 0.333984] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.334719] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0 [ 0.335140] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 0.335879] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. [ 0.335951] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 0.335951] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.335951] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.335999] sync cpu 0 get result 1 max_id 1 [ 0.335999] sync cpu 1 get result 1 max_id 1 [ 0.335999] alloc irq_desc for 412 on node 0 [ 0.335999] alloc kstat_irqs on node 0 [ 0.336006] xenbus_probe_backend_init bus registered ok [ 0.336183] xenbus_probe_frontend_init bus registered ok [ 0.336197] xen_balloon: Initialising balloon driver with page order 0. [ 0.337077] SCSI subsystem initialized [ 0.337202] libata version 3.00 loaded. [ 0.338042] usbcore: registered new interface driver usbfs [ 0.338227] usbcore: registered new interface driver hub [ 0.338240] usbcore: registered new device driver usb [ 0.339040] PCI: Using ACPI for IRQ routing [ 0.339413] IO APIC resources couldn't be allocated. [ 0.356997] cfg80211: Using static regulatory domain info [ 0.357195] cfg80211: Regulatory domain: US [ 0.357412] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 0.357780] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 0.357951] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.357951] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.357951] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.357951] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.357951] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 0.357964] cfg80211: Calling CRDA for country: US [ 0.358182] NetLabel: Initializing [ 0.358182] NetLabel: domain hash size = 128 [ 0.358365] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.358583] NetLabel: unlabeled traffic allowed by default [ 0.359961] Switched to high resolution mode on CPU 0 [ 0.360371] Switched to high resolution mode on CPU 1 [ 0.364026] pnp: PnP ACPI init [ 0.364252] ACPI: bus type pnp registered [ 0.366259] xen: registering gsi 8 triggering 1 polarity 0 [ 0.366263] xen_allocate_pirq: returning irq 8 for gsi 8 [ 0.366469] xen: --> irq=8 [ 0.366472] xen_set_ioapic_routing: irq 8 gsi 8 vector 8 ioapic 0 pin 8 triggering 0 polarity 0 [ 0.367291] xen: registering gsi 13 triggering 1 polarity 0 [ 0.367294] xen_allocate_pirq: returning irq 13 for gsi 13 [ 0.367499] xen: --> irq=13 [ 0.367502] xen_set_ioapic_routing: irq 13 gsi 13 vector 13 ioapic 0 pin 13 triggering 0 polarity 0 [ 0.368569] xen: registering gsi 6 triggering 1 polarity 0 [ 0.368573] xen_allocate_pirq: returning irq 6 for gsi 6 [ 0.368781] xen: --> irq=6 [ 0.368784] xen_set_ioapic_routing: irq 6 gsi 6 vector 6 ioapic 0 pin 6 triggering 0 polarity 0 [ 0.369981] xen: registering gsi 4 triggering 1 polarity 0 [ 0.369984] xen_allocate_pirq: returning irq 4 for gsi 4 [ 0.370189] xen: --> irq=4 [ 0.370192] xen_set_ioapic_routing: irq 4 gsi 4 vector 4 ioapic 0 pin 4 triggering 0 polarity 0 [ 0.379274] pnp: PnP ACPI: found 12 devices [ 0.379478] ACPI: ACPI bus type pnp unregistered [ 0.379705] system 00:01: ioport range 0x1000-0x107f has been reserved [ 0.379912] system 00:01: ioport range 0x1080-0x10ff has been reserved [ 0.380119] system 00:01: ioport range 0x1400-0x147f has been reserved [ 0.380254] system 00:01: ioport range 0x1480-0x14ff has been reserved [ 0.380254] system 00:01: ioport range 0x1800-0x187f has been reserved [ 0.380254] system 00:01: ioport range 0x1880-0x18ff has been reserved [ 0.380254] system 00:01: iomem range 0xfefe1000-0xfefe10ff has been reserved [ 0.380254] system 00:01: iomem range 0xb0000000-0xbfffffff has been reserved [ 0.380254] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.380254] system 00:02: ioport range 0x800-0x87f has been reserved [ 0.380254] system 00:02: ioport range 0x290-0x297 has been reserved [ 0.380254] system 00:0a: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.382228] system 00:0b: iomem range 0xcd600-0xcffff could not be reserved [ 0.382460] system 00:0b: iomem range 0xf0000-0xf7fff could not be reserved [ 0.382667] system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved [ 0.382875] system 00:0b: iomem range 0xfc000-0xfffff could not be reserved [ 0.383083] system 00:0b: iomem range 0xfeff0000-0xfeff00ff has been reserved [ 0.383215] system 00:0b: iomem range 0xafee0000-0xafefffff could not be reserved [ 0.383215] system 00:0b: iomem range 0xffff0000-0xffffffff has been reserved [ 0.383215] system 00:0b: iomem range 0x0-0x9ffff could not be reserved [ 0.383215] system 00:0b: iomem range 0x100000-0xafedffff could not be reserved [ 0.383215] system 00:0b: iomem range 0xafff0000-0xbffeffff could not be reserved [ 0.383215] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.383215] system 00:0b: iomem range 0xfee00000-0xfeefffff has been reserved [ 0.383215] system 00:0b: iomem range 0xfefff000-0xfeffffff has been reserved [ 0.383215] system 00:0b: iomem range 0xfff80000-0xfff80fff has been reserved [ 0.383215] system 00:0b: iomem range 0xfff90000-0xfffbffff has been reserved [ 0.383215] system 00:0b: iomem range 0xfffed000-0xfffeffff has been reserved [ 0.386166] pciback 0000:00:00.0: probing... [ 0.386178] pciback 0000:00:01.0: probing... [ 0.386187] pciback 0000:00:01.1: probing... [ 0.386196] pciback 0000:00:01.2: probing... [ 0.386205] pciback 0000:00:01.3: probing... [ 0.386214] pciback 0000:00:01.4: probing... [ 0.386223] pciback 0000:00:02.0: probing... [ 0.386232] pciback 0000:00:02.1: probing... [ 0.386241] pciback 0000:00:04.0: probing... [ 0.386250] pciback 0000:00:04.1: probing... [ 0.386259] pciback 0000:00:06.0: probing... [ 0.386268] pciback 0000:00:07.0: probing... [ 0.386277] pciback 0000:00:08.0: probing... [ 0.386286] pciback 0000:00:09.0: probing... [ 0.386296] pciback 0000:00:0a.0: probing... [ 0.386305] pciback 0000:00:0b.0: probing... [ 0.386314] pciback 0000:00:10.0: probing... [ 0.386323] pciback 0000:00:12.0: probing... [ 0.386332] pciback 0000:00:13.0: probing... [ 0.386342] pciback 0000:00:14.0: probing... [ 0.386351] pciback 0000:00:18.0: probing... [ 0.386360] pciback 0000:00:18.1: probing... [ 0.386369] pciback 0000:00:18.2: probing... [ 0.386378] pciback 0000:00:18.3: probing... [ 0.386387] pciback 0000:01:08.0: probing... [ 0.386396] pciback 0000:01:08.1: probing... [ 0.386404] pciback 0000:01:08.2: probing... [ 0.386413] pciback 0000:01:0a.0: probing... [ 0.386422] pciback 0000:02:00.0: probing... [ 0.386431] pciback 0000:05:00.0: probing... [ 0.386440] pciback 0000:06:01.0: probing... [ 0.386449] pciback 0000:06:01.1: probing... [ 0.386458] pciback 0000:06:01.2: probing... [ 0.386467] pciback 0000:07:00.0: probing... [ 0.391243] PM-Timer failed consistency check (0x0xffffff) - aborting. [ 0.391611] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01 [ 0.391817] pci 0000:00:08.0: IO window: 0xe000-0xefff [ 0.392002] pci 0000:00:08.0: MEM window: 0xfde00000-0xfdefffff [ 0.392002] pci 0000:00:08.0: PREFETCH window: 0xfdd00000-0xfddfffff [ 0.392002] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02 [ 0.392002] pci 0000:00:0b.0: IO window: 0xd000-0xdfff [ 0.392002] pci 0000:00:0b.0: MEM window: 0xfb000000-0xfcffffff [ 0.392002] pci 0000:00:0b.0: PREFETCH window: 0x000000d8000000-0x000000e7ffffff [ 0.392002] pci 0000:00:10.0: PCI bridge, secondary bus 0000:03 [ 0.392002] pci 0000:00:10.0: IO window: 0xc000-0xcfff [ 0.392002] pci 0000:00:10.0: MEM window: 0xfdc00000-0xfdcfffff [ 0.392002] pci 0000:00:10.0: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff [ 0.392002] pci 0000:00:12.0: PCI bridge, secondary bus 0000:04 [ 0.392002] pci 0000:00:12.0: IO window: 0xb000-0xbfff [ 0.392002] pci 0000:00:12.0: MEM window: 0xfda00000-0xfdafffff [ 0.392002] pci 0000:00:12.0: PREFETCH window: 0x000000fd900000-0x000000fd9fffff [ 0.392002] pci 0000:05:00.0: PCI bridge, secondary bus 0000:06 [ 0.392002] pci 0000:05:00.0: IO window: 0xa000-0xafff [ 0.392002] pci 0000:05:00.0: MEM window: 0xfd800000-0xfd8fffff [ 0.392002] pci 0000:05:00.0: PREFETCH window: 0x000000fd700000-0x000000fd7fffff [ 0.392002] pci 0000:00:13.0: PCI bridge, secondary bus 0000:05 [ 0.392002] pci 0000:00:13.0: IO window: 0xa000-0xafff [ 0.392002] pci 0000:00:13.0: MEM window: 0xfd800000-0xfd8fffff [ 0.392002] pci 0000:00:13.0: PREFETCH window: 0x000000fd700000-0x000000fd7fffff [ 0.392002] pci 0000:00:14.0: PCI bridge, secondary bus 0000:07 [ 0.392002] pci 0000:00:14.0: IO window: 0x9000-0x9fff [ 0.392002] pci 0000:00:14.0: MEM window: 0xfd600000-0xfd6fffff [ 0.392002] pci 0000:00:14.0: PREFETCH window: 0x000000fd500000-0x000000fd5fffff [ 0.392002] pci 0000:00:08.0: setting latency timer to 64 [ 0.392002] pci 0000:00:0b.0: setting latency timer to 64 [ 0.392002] ACPI: PCI Interrupt Link [AE0A] enabled at IRQ 16 [ 0.392002] xen: registering gsi 16 triggering 0 polarity 1 [ 0.392002] alloc irq_desc for 16 on node 0 [ 0.392002] alloc kstat_irqs on node 0 [ 0.399289] xen: --> irq=16 [ 0.399293] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1 [ 0.399674] pci 0000:00:10.0: PCI INT A -> Link[AE0A] -> GSI 16 (level, low) -> IRQ 16 [ 0.400053] pci 0000:00:10.0: setting latency timer to 64 [ 0.400283] ACPI: PCI Interrupt Link [AE2A] enabled at IRQ 16 [ 0.400283] xen: registering gsi 16 triggering 0 polarity 1 [ 0.400283] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.400283] xen: --> irq=16 [ 0.400283] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1 [ 0.400283] pci 0000:00:12.0: PCI INT A -> Link[AE2A] -> GSI 16 (level, low) -> IRQ 16 [ 0.400283] pci 0000:00:12.0: setting latency timer to 64 [ 0.400283] ACPI: PCI Interrupt Link [AE3A] enabled at IRQ 16 [ 0.400283] xen: registering gsi 16 triggering 0 polarity 1 [ 0.400283] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.400283] xen: --> irq=16 [ 0.400283] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1 [ 0.400283] pci 0000:00:13.0: PCI INT A -> Link[AE3A] -> GSI 16 (level, low) -> IRQ 16 [ 0.400283] pci 0000:00:13.0: setting latency timer to 64 [ 0.400283] pci 0000:05:00.0: setting latency timer to 64 [ 0.400283] ACPI: PCI Interrupt Link [AE4A] enabled at IRQ 16 [ 0.400283] xen: registering gsi 16 triggering 0 polarity 1 [ 0.400283] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.400283] xen: --> irq=16 [ 0.400283] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1 [ 0.400283] pci 0000:00:14.0: PCI INT A -> Link[AE4A] -> GSI 16 (level, low) -> IRQ 16 [ 0.400283] pci 0000:00:14.0: setting latency timer to 64 [ 0.400283] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.400283] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.400283] pci_bus 0000:01: resource 0 io: [0xe000-0xefff] [ 0.400283] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff] [ 0.400283] pci_bus 0000:01: resource 2 pref mem [0xfdd00000-0xfddfffff] [ 0.400283] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.400283] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.400283] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff] [ 0.400283] pci_bus 0000:02: resource 1 mem: [0xfb000000-0xfcffffff] [ 0.400283] pci_bus 0000:02: resource 2 pref mem [0xd8000000-0xe7ffffff] [ 0.400283] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff] [ 0.400283] pci_bus 0000:03: resource 1 mem: [0xfdc00000-0xfdcfffff] [ 0.400283] pci_bus 0000:03: resource 2 pref mem [0xfdb00000-0xfdbfffff] [ 0.400283] pci_bus 0000:04: resource 0 io: [0xb000-0xbfff] [ 0.400283] pci_bus 0000:04: resource 1 mem: [0xfda00000-0xfdafffff] [ 0.400283] pci_bus 0000:04: resource 2 pref mem [0xfd900000-0xfd9fffff] [ 0.400283] pci_bus 0000:05: resource 0 io: [0xa000-0xafff] [ 0.400283] pci_bus 0000:05: resource 1 mem: [0xfd800000-0xfd8fffff] [ 0.400283] pci_bus 0000:05: resource 2 pref mem [0xfd700000-0xfd7fffff] [ 0.400283] pci_bus 0000:06: resource 0 io: [0xa000-0xafff] [ 0.400283] pci_bus 0000:06: resource 1 mem: [0xfd800000-0xfd8fffff] [ 0.400283] pci_bus 0000:06: resource 2 pref mem [0xfd700000-0xfd7fffff] [ 0.400283] pci_bus 0000:07: resource 0 io: [0x9000-0x9fff] [ 0.400283] pci_bus 0000:07: resource 1 mem: [0xfd600000-0xfd6fffff] [ 0.400283] pci_bus 0000:07: resource 2 pref mem [0xfd500000-0xfd5fffff] [ 0.404858] NET: Registered protocol family 2 [ 0.405141] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.405709] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 0.406084] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.406084] TCP: Hash tables configured (established 131072 bind 65536) [ 0.406084] TCP reno registered [ 0.408320] NET: Registered protocol family 1 [ 0.408607] Trying to unpack rootfs image as initramfs... [ 0.417039] Freeing initrd memory: 5928k freed [ 0.420817] kvm: no hardware support [ 0.421043] has_svm: svm not available [ 0.421244] kvm: no hardware support [ 0.423709] Microcode Update Driver: v2.00 , Peter Oruba [ 0.424109] Scanning for low memory corruption every 60 seconds [ 0.424873] audit: initializing netlink socket (disabled) [ 0.432552] type=2000 audit(1260780903.209:1): initialized [ 0.440573] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.445874] VFS: Disk quotas dquot_6.5.2 [ 0.446345] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.448041] msgmni has been set to 1354 [ 0.448468] SELinux: Registering netfilter hooks [ 0.449280] alg: No test for stdrng (krng) [ 0.449712] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.450089] io scheduler noop registered [ 0.450289] io scheduler anticipatory registered [ 0.450517] io scheduler deadline registered [ 0.450762] io scheduler cfq registered (default) [ 0.489107] pci 0000:00:08.0: Enabling HT MSI Mapping [ 0.489517] pci 0000:00:09.0: Enabling HT MSI Mapping [ 0.489931] pci 0000:00:0a.0: Enabling HT MSI Mapping [ 0.490396] pci 0000:00:0b.0: Enabling HT MSI Mapping [ 0.490925] pci 0000:01:08.0: uhci_check_and_reset_hc: legsup = 0x2000 [ 0.490928] pci 0000:01:08.0: Performing full reset [ 0.490951] pci 0000:01:08.1: uhci_check_and_reset_hc: legsup = 0x2000 [ 0.490954] pci 0000:01:08.1: Performing full reset [ 0.491007] pci 0000:02:00.0: Boot video device [ 0.491603] alloc irq_desc for 411 on node 0 [ 0.491606] alloc kstat_irqs on node 0 [ 0.491703] pcieport-driver 0000:00:10.0: setting latency timer to 64 [ 0.492318] alloc irq_desc for 410 on node 0 [ 0.492321] alloc kstat_irqs on node 0 [ 0.492410] pcieport-driver 0000:00:12.0: setting latency timer to 64 [ 0.492970] alloc irq_desc for 409 on node 0 [ 0.492973] alloc kstat_irqs on node 0 [ 0.493068] pcieport-driver 0000:00:13.0: setting latency timer to 64 [ 0.493623] alloc irq_desc for 408 on node 0 [ 0.493626] alloc kstat_irqs on node 0 [ 0.493714] pcieport-driver 0000:00:14.0: setting latency timer to 64 [ 0.494159] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.494999] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.495372] ACPI: Power Button [PWRF] [ 0.495733] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.496106] ACPI: Power Button [PWRB] [ 0.496531] fan PNP0C0B:00: registered as cooling_device0 [ 0.496742] ACPI: Fan [FAN] (on) [ 0.510129] ACPI Warning: \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference 20090521 nspredef-946 [ 0.510580] ACPI: Expecting a [Reference] package element, found type 0 [ 0.510786] ACPI: Invalid passive threshold [ 0.511622] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.511838] ACPI: Thermal Zone [THRM] (40 C) [ 0.512334] Event-channel device installed. [ 0.518539] blktap_device_init: blktap device major 253 [ 0.518762] blktap_ring_init: blktap ring major: 251 [ 0.520235] registering netback [ 0.520584] pciback: pcistub_init_devices_late [ 0.526455] alloc irq_desc for 407 on node 0 [ 0.526459] alloc kstat_irqs on node 0 [ 0.527392] hpet_acpi_add: no address or irqs in _CRS [ 0.527816] Non-volatile memory driver v1.3 [ 0.528116] Linux agpgart interface v0.103 [ 0.528507] [drm] Initialized drm 1.1.0 20060810 [ 0.528785] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.533235] brd: module loaded [ 0.592985] loop: module loaded [ 0.593475] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.594424] ahci 0000:00:09.0: version 3.0 [ 0.595038] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 0.595246] xen: registering gsi 23 triggering 0 polarity 1 [ 0.595253] alloc irq_desc for 23 on node 0 [ 0.595256] alloc kstat_irqs on node 0 [ 0.595262] xen: --> irq=23 [ 0.595266] xen_set_ioapic_routing: irq 23 gsi 23 vector 23 ioapic 0 pin 23 triggering 1 polarity 1 [ 0.595675] ahci 0000:00:09.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 0.596004] alloc irq_desc for 406 on node 0 [ 0.596004] alloc kstat_irqs on node 0 [ 0.596219] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode [ 0.596592] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio [ 0.596815] ahci 0000:00:09.0: setting latency timer to 64 [ 0.598059] scsi0 : ahci [ 0.598552] scsi1 : ahci [ 0.598941] scsi2 : ahci [ 0.599361] scsi3 : ahci [ 0.599770] scsi4 : ahci [ 0.600219] scsi5 : ahci [ 0.600831] ata1: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026100 irq 406 [ 0.601229] ata2: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026180 irq 406 [ 0.601557] ata3: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026200 irq 406 [ 0.601557] ata4: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026280 irq 406 [ 0.601557] ata5: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026300 irq 406 [ 0.601557] ata6: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026380 irq 406 [ 0.603451] pata_amd 0000:00:06.0: version 0.4.1 [ 0.603510] pata_amd 0000:00:06.0: setting latency timer to 64 [ 0.603642] scsi6 : pata_amd [ 0.604056] scsi7 : pata_amd [ 0.605492] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 [ 0.605701] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 [ 0.606427] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI [ 0.606671] Copyright (c) 1999-2006 Intel Corporation. [ 0.606954] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 0.607160] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 0.607254] xen: registering gsi 16 triggering 0 polarity 1 [ 0.607254] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.607254] xen: --> irq=16 [ 0.607254] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1 [ 0.607254] e1000e 0000:07:00.0: PCI INT A -> Link[AE4A] -> GSI 16 (level, low) -> IRQ 16 [ 0.607254] e1000e 0000:07:00.0: setting latency timer to 64 [ 0.607254] alloc irq_desc for 405 on node 0 [ 0.607254] alloc kstat_irqs on node 0 [ 0.761858] 0000:07:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1b:21:2c:68:fe [ 0.762251] 0000:07:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 0.762251] 0000:07:00.0: eth0: MAC: 1, PHY: 4, PBA No: d50854-003 [ 0.762929] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 0.763150] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.763611] sky2 driver version 1.23 [ 0.763910] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 0.764925] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 [ 0.765145] xen: registering gsi 22 triggering 0 polarity 1 [ 0.765151] alloc irq_desc for 22 on node 0 [ 0.765154] alloc kstat_irqs on node 0 [ 0.765159] xen: --> irq=22 [ 0.765163] xen_set_ioapic_routing: irq 22 gsi 22 vector 22 ioapic 0 pin 22 triggering 1 polarity 1 [ 0.765308] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22 [ 0.765308] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 0.907021] ata3: SATA link down (SStatus 0 SControl 300) [ 0.907262] ata2: SATA link down (SStatus 0 SControl 300) [ 0.908268] ata4: SATA link down (SStatus 0 SControl 300) [ 0.908490] ata6: SATA link down (SStatus 0 SControl 300) [ 0.908712] ata5: SATA link down (SStatus 0 SControl 300) [ 1.060018] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.061495] ata1.00: ATA-8: Hitachi HDS722020ALA330, JKAOA20N, max UDMA/133 [ 1.061705] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.063325] ata1.00: configured for UDMA/133 [ 1.063653] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72202 JKAO PQ: 0 ANSI: 5 [ 1.064634] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.064892] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 1.065436] ata8: port disabled. ignoring. [ 1.065474] sd 0:0:0:0: [sda] Write Protect is off [ 1.065688] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.065731] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 1.066380] sda: sda1 sda2 [ 1.072161] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.271542] forcedeth 0000:00:0a.0: ifname eth1, PHY OUI 0x1374 @ 1, addr 00:1f:c6:8c:5e:b2 [ 1.271917] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3 [ 1.272648] console [netcon0] enabled [ 1.272850] netconsole: network logging started [ 1.273347] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.273583] ehci_hcd: block sizes: qh 192 qtd 96 itd 192 sitd 96 [ 1.274161] ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 21 [ 1.274331] xen: registering gsi 21 triggering 0 polarity 1 [ 1.274331] alloc irq_desc for 21 on node 0 [ 1.274331] alloc kstat_irqs on node 0 [ 1.274394] xen: --> irq=21 [ 1.274398] xen_set_ioapic_routing: irq 21 gsi 21 vector 21 ioapic 0 pin 21 triggering 1 polarity 1 [ 1.274780] ehci_hcd 0000:00:02.1: PCI INT B -> Link[AUB2] -> GSI 21 (level, low) -> IRQ 21 [ 1.275205] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 1.275210] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 1.275453] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file 'devices' [ 1.275459] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 1.275569] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 1.275945] ehci_hcd 0000:00:02.1: reset hcs_params 0x101f86 dbg=1 cc=1 pcc=15 !ppc ports=6 [ 1.275953] ehci_hcd 0000:00:02.1: reset portroute 0 0 0 0 0 0 [ 1.275957] ehci_hcd 0000:00:02.1: reset hcc_params a086 caching frame 256/512/1024 park [ 1.276015] ehci_hcd 0000:00:02.1: park 0 [ 1.276021] ehci_hcd 0000:00:02.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT [ 1.276036] ehci_hcd 0000:00:02.1: debug port 1 [ 1.276243] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 1.276282] ehci_hcd 0000:00:02.1: supports USB remote wakeup [ 1.276319] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfe02e000 [ 1.276526] ehci_hcd 0000:00:02.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT [ 1.276534] ehci_hcd 0000:00:02.1: init command 010009 (park)=0 ithresh=1 period=256 RUN [ 1.282017] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 1.282265] usb usb1: default language 0x0409 [ 1.282277] usb usb1: udev 1, busnum 1, minor = 0 [ 1.282280] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.282487] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.282855] usb usb1: Product: EHCI Host Controller [ 1.283057] usb usb1: Manufacturer: Linux 2.6.31.6 ehci_hcd [ 1.283252] usb usb1: SerialNumber: 0000:00:02.1 [ 1.283540] usb usb1: uevent [ 1.283619] usb usb1: usb_probe_device [ 1.283623] usb usb1: configuration #1 chosen from 1 choice [ 1.283836] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 1.283854] usb 1-0:1.0: uevent [ 1.283925] hub 1-0:1.0: usb_probe_interface [ 1.283928] hub 1-0:1.0: usb_probe_interface - got id [ 1.283931] hub 1-0:1.0: USB hub found [ 1.284152] hub 1-0:1.0: 6 ports detected [ 1.284354] hub 1-0:1.0: standalone hub [ 1.284356] hub 1-0:1.0: no power switching (usb 1.0) [ 1.284359] hub 1-0:1.0: individual port over-current protection [ 1.284362] hub 1-0:1.0: power on to power good time: 20ms [ 1.284376] hub 1-0:1.0: local power source is good [ 1.284380] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 1.284416] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 1.284803] ACPI: PCI Interrupt Link [AU2B] disabled and referenced, BIOS bug [ 1.285224] ACPI: PCI Interrupt Link [AU2B] enabled at IRQ 20 [ 1.285367] xen: registering gsi 20 triggering 0 polarity 1 [ 1.285367] alloc irq_desc for 20 on node 0 [ 1.285367] alloc kstat_irqs on node 0 [ 1.285452] xen: --> irq=20 [ 1.285456] xen_set_ioapic_routing: irq 20 gsi 20 vector 20 ioapic 0 pin 20 triggering 1 polarity 1 [ 1.285835] ehci_hcd 0000:00:04.1: PCI INT B -> Link[AU2B] -> GSI 20 (level, low) -> IRQ 20 [ 1.286255] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 1.286260] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 1.286474] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '002' [ 1.286584] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 [ 1.286960] ehci_hcd 0000:00:04.1: reset hcs_params 0x101f86 dbg=1 cc=1 pcc=15 !ppc ports=6 [ 1.286969] ehci_hcd 0000:00:04.1: reset portroute 0 0 0 0 0 0 [ 1.286973] ehci_hcd 0000:00:04.1: reset hcc_params a086 caching frame 256/512/1024 park [ 1.287019] ehci_hcd 0000:00:04.1: park 0 [ 1.287024] ehci_hcd 0000:00:04.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT [ 1.287040] ehci_hcd 0000:00:04.1: debug port 1 [ 1.287247] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported [ 1.287251] ehci_hcd 0000:00:04.1: supports USB remote wakeup [ 1.287278] ehci_hcd 0000:00:04.1: irq 20, io mem 0xfe02c000 [ 1.287512] ehci_hcd 0000:00:04.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT [ 1.287520] ehci_hcd 0000:00:04.1: init command 010009 (park)=0 ithresh=1 period=256 RUN [ 1.293018] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 1.293251] usb usb2: default language 0x0409 [ 1.293269] usb usb2: udev 1, busnum 2, minor = 128 [ 1.293272] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.293479] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.293848] usb usb2: Product: EHCI Host Controller [ 1.294050] usb usb2: Manufacturer: Linux 2.6.31.6 ehci_hcd [ 1.294254] usb usb2: SerialNumber: 0000:00:04.1 [ 1.294532] usb usb2: uevent [ 1.294609] usb usb2: usb_probe_device [ 1.294613] usb usb2: configuration #1 chosen from 1 choice [ 1.294824] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 1.294844] usb 2-0:1.0: uevent [ 1.294914] hub 2-0:1.0: usb_probe_interface [ 1.294918] hub 2-0:1.0: usb_probe_interface - got id [ 1.294921] hub 2-0:1.0: USB hub found [ 1.295140] hub 2-0:1.0: 6 ports detected [ 1.295342] hub 2-0:1.0: standalone hub [ 1.295345] hub 2-0:1.0: no power switching (usb 1.0) [ 1.295347] hub 2-0:1.0: individual port over-current protection [ 1.295350] hub 2-0:1.0: power on to power good time: 20ms [ 1.295364] hub 2-0:1.0: local power source is good [ 1.295368] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 1.295403] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 1.295988] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 1.296193] xen: registering gsi 18 triggering 0 polarity 1 [ 1.296200] alloc irq_desc for 18 on node 0 [ 1.296203] alloc kstat_irqs on node 0 [ 1.296207] xen: --> irq=18 [ 1.296211] xen_set_ioapic_routing: irq 18 gsi 18 vector 18 ioapic 0 pin 18 triggering 1 polarity 1 [ 1.296355] ehci_hcd 0000:01:08.2: PCI INT C -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 1.296355] ehci_hcd 0000:01:08.2: EHCI Host Controller [ 1.297225] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '003' [ 1.297344] ehci_hcd 0000:01:08.2: new USB bus registered, assigned bus number 3 [ 1.297720] ehci_hcd 0000:01:08.2: reset hcs_params 0x2204 dbg=0 cc=2 pcc=2 ordered !ppc ports=4 [ 1.297725] ehci_hcd 0000:01:08.2: reset hcc_params 6872 thresh 7 uframes 256/512/1024 [ 1.297777] ehci_hcd 0000:01:08.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.297801] ehci_hcd 0000:01:08.2: MWI active [ 1.297803] ehci_hcd 0000:01:08.2: supports USB remote wakeup [ 1.297835] ehci_hcd 0000:01:08.2: irq 18, io mem 0xfdeff000 [ 1.298042] ehci_hcd 0000:01:08.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.298049] ehci_hcd 0000:01:08.2: init command 010009 (park)=0 ithresh=1 period=256 RUN [ 1.304024] ehci_hcd 0000:01:08.2: USB 2.0 started, EHCI 1.00 [ 1.304265] usb usb3: default language 0x0409 [ 1.304277] usb usb3: udev 1, busnum 3, minor = 256 [ 1.304280] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.304486] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.304854] usb usb3: Product: EHCI Host Controller [ 1.305056] usb usb3: Manufacturer: Linux 2.6.31.6 ehci_hcd [ 1.305253] usb usb3: SerialNumber: 0000:01:08.2 [ 1.312994] usb usb3: uevent [ 1.313073] usb usb3: usb_probe_device [ 1.313077] usb usb3: configuration #1 chosen from 1 choice [ 1.313295] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 1.313317] usb 3-0:1.0: uevent [ 1.313389] hub 3-0:1.0: usb_probe_interface [ 1.313393] hub 3-0:1.0: usb_probe_interface - got id [ 1.313395] hub 3-0:1.0: USB hub found [ 1.313616] hub 3-0:1.0: 4 ports detected [ 1.313845] hub 3-0:1.0: standalone hub [ 1.313847] hub 3-0:1.0: no power switching (usb 1.0) [ 1.313850] hub 3-0:1.0: individual port over-current protection [ 1.313853] hub 3-0:1.0: power on to power good time: 20ms [ 1.313860] hub 3-0:1.0: local power source is good [ 1.313864] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 1.313897] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 1.314463] ACPI: PCI Interrupt Link [AE3D] enabled at IRQ 16 [ 1.314669] xen: registering gsi 16 triggering 0 polarity 1 [ 1.314672] xen_allocate_pirq: returning irq 16 for gsi 16 [ 1.314875] xen: --> irq=16 [ 1.314878] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1 [ 1.315254] ehci_hcd 0000:06:01.2: PCI INT C -> Link[AE3D] -> GSI 16 (level, low) -> IRQ 16 [ 1.315254] ehci_hcd 0000:06:01.2: EHCI Host Controller [ 1.315893] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '004' [ 1.316018] ehci_hcd 0000:06:01.2: new USB bus registered, assigned bus number 4 [ 1.316396] ehci_hcd 0000:06:01.2: reset hcs_params 0x2395 dbg=0 cc=2 pcc=3 ports=5 [ 1.316407] ehci_hcd 0000:06:01.2: reset portroute 1 0 1 0 0 [ 1.316412] ehci_hcd 0000:06:01.2: reset hcc_params e806 thresh 0 uframes 256/512/1024 park [ 1.316497] ehci_hcd 0000:06:01.2: park 0 [ 1.316503] ehci_hcd 0000:06:01.2: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT [ 1.316512] ehci_hcd 0000:06:01.2: ...powerup ports... [ 1.337040] ehci_hcd 0000:06:01.2: MWI active [ 1.337043] ehci_hcd 0000:06:01.2: supports USB remote wakeup [ 1.337074] ehci_hcd 0000:06:01.2: irq 16, io mem 0xfd8fd000 [ 1.337308] ehci_hcd 0000:06:01.2: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT [ 1.337316] ehci_hcd 0000:06:01.2: init command 010009 (park)=0 ithresh=1 period=256 RUN [ 1.343017] ehci_hcd 0000:06:01.2: USB 2.0 started, EHCI 1.00 [ 1.343266] usb usb4: default language 0x0409 [ 1.343278] usb usb4: udev 1, busnum 4, minor = 384 [ 1.343281] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.343488] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.343856] usb usb4: Product: EHCI Host Controller [ 1.344059] usb usb4: Manufacturer: Linux 2.6.31.6 ehci_hcd [ 1.344252] usb usb4: SerialNumber: 0000:06:01.2 [ 1.344542] usb usb4: uevent [ 1.344620] usb usb4: usb_probe_device [ 1.344624] usb usb4: configuration #1 chosen from 1 choice [ 1.344837] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 1.344858] usb 4-0:1.0: uevent [ 1.344929] hub 4-0:1.0: usb_probe_interface [ 1.344932] hub 4-0:1.0: usb_probe_interface - got id [ 1.344935] hub 4-0:1.0: USB hub found [ 1.345156] hub 4-0:1.0: 5 ports detected [ 1.345358] hub 4-0:1.0: standalone hub [ 1.345360] hub 4-0:1.0: individual port power switching [ 1.345363] hub 4-0:1.0: individual port over-current protection [ 1.345366] hub 4-0:1.0: power on to power good time: 20ms [ 1.345380] hub 4-0:1.0: local power source is good [ 1.345383] hub 4-0:1.0: enabling power on all ports [ 1.345424] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 1.345530] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.345764] ohci_hcd: block sizes: ed 80 td 96 [ 1.346321] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23 [ 1.346527] xen: registering gsi 23 triggering 0 polarity 1 [ 1.346531] xen_allocate_pirq: returning irq 23 for gsi 23 [ 1.346734] xen: --> irq=23 [ 1.346737] xen_set_ioapic_routing: irq 23 gsi 23 vector 23 ioapic 0 pin 23 triggering 1 polarity 1 [ 1.347145] ohci_hcd 0000:00:02.0: PCI INT A -> Link[AUBA] -> GSI 23 (level, low) -> IRQ 23 [ 1.347253] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 1.347253] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 1.347757] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '005' [ 1.347870] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 5 [ 1.348279] ohci_hcd 0000:00:02.0: created debug files [ 1.348283] ohci_hcd 0000:00:02.0: supports USB remote wakeup [ 1.348317] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000 [ 1.384037] ehci_hcd 0000:00:02.1: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT [ 1.384042] hub 1-0:1.0: port 6: status 0501 change 0001 [ 1.395048] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 1.401022] ohci_hcd 0000:00:02.0: OHCI controller state [ 1.401026] ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers [ 1.401030] ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=operational CBSR=3 [ 1.401034] ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=0 [ 1.401038] ohci_hcd 0000:00:02.0: intrstatus 0x00000004 SF [ 1.401042] ohci_hcd 0000:00:02.0: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.401075] ohci_hcd 0000:00:02.0: hcca frame #0003 [ 1.401080] ohci_hcd 0000:00:02.0: roothub.a 01000206 POTPGT=1 NPS NDP=6(6) [ 1.401084] ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.401088] ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE [ 1.401092] ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS [ 1.401097] ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS [ 1.401101] ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS [ 1.401106] ohci_hcd 0000:00:02.0: roothub.portstatus [3] 0x00000100 PPS [ 1.401110] ohci_hcd 0000:00:02.0: roothub.portstatus [4] 0x00000100 PPS [ 1.401115] ohci_hcd 0000:00:02.0: roothub.portstatus [5] 0x00000100 PPS [ 1.401132] usb usb5: default language 0x0409 [ 1.401143] usb usb5: udev 1, busnum 5, minor = 512 [ 1.401146] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.401252] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.401252] usb usb5: Product: OHCI Host Controller [ 1.401252] usb usb5: Manufacturer: Linux 2.6.31.6 ohci_hcd [ 1.401252] usb usb5: SerialNumber: 0000:00:02.0 [ 1.402377] usb usb5: uevent [ 1.402480] usb usb5: usb_probe_device [ 1.402484] usb usb5: configuration #1 chosen from 1 choice [ 1.402695] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 1.402719] usb 5-0:1.0: uevent [ 1.402791] hub 5-0:1.0: usb_probe_interface [ 1.402794] hub 5-0:1.0: usb_probe_interface - got id [ 1.402797] hub 5-0:1.0: USB hub found [ 1.403018] hub 5-0:1.0: 6 ports detected [ 1.403219] hub 5-0:1.0: standalone hub [ 1.403222] hub 5-0:1.0: no power switching (usb 1.0) [ 1.403225] hub 5-0:1.0: global over-current protection [ 1.403228] hub 5-0:1.0: power on to power good time: 2ms [ 1.403235] hub 5-0:1.0: local power source is good [ 1.403238] hub 5-0:1.0: no over-current condition exists [ 1.403241] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 1.403276] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 1.403864] ACPI: PCI Interrupt Link [AU1B] enabled at IRQ 22 [ 1.404070] xen: registering gsi 22 triggering 0 polarity 1 [ 1.404073] xen_allocate_pirq: returning irq 22 for gsi 22 [ 1.404253] xen: --> irq=22 [ 1.404253] xen_set_ioapic_routing: irq 22 gsi 22 vector 22 ioapic 0 pin 22 triggering 1 polarity 1 [ 1.404253] ohci_hcd 0000:00:04.0: PCI INT A -> Link[AU1B] -> GSI 22 (level, low) -> IRQ 22 [ 1.404253] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 1.404253] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 1.405297] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '006' [ 1.405411] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 6 [ 1.405809] ohci_hcd 0000:00:04.0: created debug files [ 1.405812] ohci_hcd 0000:00:04.0: supports USB remote wakeup [ 1.405841] ohci_hcd 0000:00:04.0: irq 22, io mem 0xfe02d000 [ 1.413024] ehci_hcd 0000:01:08.2: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT [ 1.413029] hub 3-0:1.0: port 1: status 0501 change 0001 [ 1.445027] ehci_hcd 0000:06:01.2: GetStatus port 3 status 001403 POWER sig=k CSC CONNECT [ 1.445032] hub 4-0:1.0: port 3: status 0501 change 0001 [ 1.445042] ehci_hcd 0000:06:01.2: GetStatus port 4 status 001803 POWER sig=j CSC CONNECT [ 1.445047] hub 4-0:1.0: port 4: status 0501 change 0001 [ 1.459020] ohci_hcd 0000:00:04.0: OHCI controller state [ 1.459024] ohci_hcd 0000:00:04.0: OHCI 1.0, NO legacy support registers [ 1.459028] ohci_hcd 0000:00:04.0: control 0x683 RWE RWC HCFS=operational CBSR=3 [ 1.459032] ohci_hcd 0000:00:04.0: cmdstatus 0x00000 SOC=0 [ 1.459036] ohci_hcd 0000:00:04.0: intrstatus 0x00000004 SF [ 1.459040] ohci_hcd 0000:00:04.0: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.459046] ohci_hcd 0000:00:04.0: hcca frame #0003 [ 1.459050] ohci_hcd 0000:00:04.0: roothub.a 01000206 POTPGT=1 NPS NDP=6(6) [ 1.459054] ohci_hcd 0000:00:04.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.459058] ohci_hcd 0000:00:04.0: roothub.status 00008000 DRWE [ 1.459063] ohci_hcd 0000:00:04.0: roothub.portstatus [0] 0x00000100 PPS [ 1.459067] ohci_hcd 0000:00:04.0: roothub.portstatus [1] 0x00000100 PPS [ 1.459072] ohci_hcd 0000:00:04.0: roothub.portstatus [2] 0x00000100 PPS [ 1.459076] ohci_hcd 0000:00:04.0: roothub.portstatus [3] 0x00000100 PPS [ 1.459081] ohci_hcd 0000:00:04.0: roothub.portstatus [4] 0x00000100 PPS [ 1.459085] ohci_hcd 0000:00:04.0: roothub.portstatus [5] 0x00000100 PPS [ 1.459102] usb usb6: default language 0x0409 [ 1.459113] usb usb6: udev 1, busnum 6, minor = 640 [ 1.459116] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.459252] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.459252] usb usb6: Product: OHCI Host Controller [ 1.459252] usb usb6: Manufacturer: Linux 2.6.31.6 ohci_hcd [ 1.459252] usb usb6: SerialNumber: 0000:00:04.0 [ 1.460377] usb usb6: uevent [ 1.460454] usb usb6: usb_probe_device [ 1.460458] usb usb6: configuration #1 chosen from 1 choice [ 1.460669] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 1.460716] usb 6-0:1.0: uevent [ 1.460787] hub 6-0:1.0: usb_probe_interface [ 1.460790] hub 6-0:1.0: usb_probe_interface - got id [ 1.460793] hub 6-0:1.0: USB hub found [ 1.461014] hub 6-0:1.0: 6 ports detected [ 1.461215] hub 6-0:1.0: standalone hub [ 1.461218] hub 6-0:1.0: no power switching (usb 1.0) [ 1.461221] hub 6-0:1.0: global over-current protection [ 1.461224] hub 6-0:1.0: power on to power good time: 2ms [ 1.461231] hub 6-0:1.0: local power source is good [ 1.461234] hub 6-0:1.0: no over-current condition exists [ 1.461237] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 1.461274] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 1.461841] ACPI: PCI Interrupt Link [AE3B] enabled at IRQ 16 [ 1.462047] xen: registering gsi 16 triggering 0 polarity 1 [ 1.462050] xen_allocate_pirq: returning irq 16 for gsi 16 [ 1.462257] xen: --> irq=16 [ 1.462257] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1 [ 1.462257] ohci_hcd 0000:06:01.0: PCI INT A -> Link[AE3B] -> GSI 16 (level, low) -> IRQ 16 [ 1.462257] ohci_hcd 0000:06:01.0: OHCI Host Controller [ 1.463278] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '007' [ 1.463390] ohci_hcd 0000:06:01.0: new USB bus registered, assigned bus number 7 [ 1.463791] ohci_hcd 0000:06:01.0: enabled NEC chipset lost interrupt quirk [ 1.463827] ohci_hcd 0000:06:01.0: created debug files [ 1.463830] ohci_hcd 0000:06:01.0: supports USB remote wakeup [ 1.463840] ohci_hcd 0000:06:01.0: irq 16, io mem 0xfd8ff000 [ 1.484032] hub 1-0:1.0: state 7 ports 6 chg 0040 evt 0000 [ 1.484045] hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s [ 1.484055] ehci_hcd 0000:00:02.1: port 6 low speed --> companion [ 1.503032] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00010301 CSC LSDA PPS CCS [ 1.503037] hub 5-0:1.0: port 6: status 0301 change 0001 [ 1.536018] ehci_hcd 0000:00:02.1: GetStatus port 6 status 003402 POWER OWNER sig=k CSC [ 1.536038] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040 [ 1.536045] hub 3-0:1.0: state 7 ports 4 chg 0002 evt 0000 [ 1.536052] hub 3-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 1.545033] ohci_hcd 0000:06:01.0: OHCI controller state [ 1.545038] ohci_hcd 0000:06:01.0: OHCI 1.0, NO legacy support registers [ 1.545043] ohci_hcd 0000:06:01.0: control 0x283 RWC HCFS=operational CBSR=3 [ 1.545048] ohci_hcd 0000:06:01.0: cmdstatus 0x00000 SOC=0 [ 1.545053] ohci_hcd 0000:06:01.0: intrstatus 0x00000004 SF [ 1.545058] ohci_hcd 0000:06:01.0: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.545069] ohci_hcd 0000:06:01.0: hcca frame #001f [ 1.545074] ohci_hcd 0000:06:01.0: roothub.a 0f000203 POTPGT=15 NPS NDP=3(3) [ 1.545078] ohci_hcd 0000:06:01.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.545083] ohci_hcd 0000:06:01.0: roothub.status 00008000 DRWE [ 1.545088] ohci_hcd 0000:06:01.0: roothub.portstatus [0] 0x00000100 PPS [ 1.545093] ohci_hcd 0000:06:01.0: roothub.portstatus [1] 0x00000100 PPS [ 1.545099] ohci_hcd 0000:06:01.0: roothub.portstatus [2] 0x00000100 PPS [ 1.545115] usb usb7: default language 0x0409 [ 1.545127] usb usb7: udev 1, busnum 7, minor = 768 [ 1.545130] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.545252] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.545252] usb usb7: Product: OHCI Host Controller [ 1.545252] usb usb7: Manufacturer: Linux 2.6.31.6 ohci_hcd [ 1.545252] usb usb7: SerialNumber: 0000:06:01.0 [ 1.546402] usb usb7: uevent [ 1.546478] usb usb7: usb_probe_device [ 1.546481] usb usb7: configuration #1 chosen from 1 choice [ 1.546720] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 1.546739] usb 7-0:1.0: uevent [ 1.546810] hub 7-0:1.0: usb_probe_interface [ 1.546813] hub 7-0:1.0: usb_probe_interface - got id [ 1.546816] hub 7-0:1.0: USB hub found [ 1.547040] hub 7-0:1.0: 3 ports detected [ 1.547240] hub 7-0:1.0: standalone hub [ 1.547243] hub 7-0:1.0: no power switching (usb 1.0) [ 1.547246] hub 7-0:1.0: global over-current protection [ 1.547249] hub 7-0:1.0: power on to power good time: 30ms [ 1.547265] hub 7-0:1.0: local power source is good [ 1.547268] hub 7-0:1.0: no over-current condition exists [ 1.547271] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 1.547294] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 1.547856] ACPI: PCI Interrupt Link [AE3C] enabled at IRQ 16 [ 1.548084] xen: registering gsi 16 triggering 0 polarity 1 [ 1.548087] xen_allocate_pirq: returning irq 16 for gsi 16 [ 1.548255] xen: --> irq=16 [ 1.548255] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1 [ 1.548255] ohci_hcd 0000:06:01.1: PCI INT B -> Link[AE3C] -> GSI 16 (level, low) -> IRQ 16 [ 1.548255] ohci_hcd 0000:06:01.1: OHCI Host Controller [ 1.549292] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '008' [ 1.549405] ohci_hcd 0000:06:01.1: new USB bus registered, assigned bus number 8 [ 1.549806] ohci_hcd 0000:06:01.1: enabled NEC chipset lost interrupt quirk [ 1.549836] ohci_hcd 0000:06:01.1: created debug files [ 1.549839] ohci_hcd 0000:06:01.1: supports USB remote wakeup [ 1.549848] ohci_hcd 0000:06:01.1: irq 16, io mem 0xfd8fe000 [ 1.586334] ehci_hcd 0000:01:08.2: port 1 high speed [ 1.586339] ehci_hcd 0000:01:08.2: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT [ 1.631030] ohci_hcd 0000:06:01.1: OHCI controller state [ 1.631035] ohci_hcd 0000:06:01.1: OHCI 1.0, NO legacy support registers [ 1.631041] ohci_hcd 0000:06:01.1: control 0x283 RWC HCFS=operational CBSR=3 [ 1.631045] ohci_hcd 0000:06:01.1: cmdstatus 0x00000 SOC=0 [ 1.631050] ohci_hcd 0000:06:01.1: intrstatus 0x00000004 SF [ 1.631056] ohci_hcd 0000:06:01.1: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.631067] ohci_hcd 0000:06:01.1: hcca frame #001f [ 1.631072] ohci_hcd 0000:06:01.1: roothub.a 0f000202 POTPGT=15 NPS NDP=2(2) [ 1.631076] ohci_hcd 0000:06:01.1: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.631081] ohci_hcd 0000:06:01.1: roothub.status 00008000 DRWE [ 1.631086] ohci_hcd 0000:06:01.1: roothub.portstatus [0] 0x00000100 PPS [ 1.631091] ohci_hcd 0000:06:01.1: roothub.portstatus [1] 0x00000100 PPS [ 1.631127] usb usb8: default language 0x0409 [ 1.631140] usb usb8: udev 1, busnum 8, minor = 896 [ 1.631143] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.631385] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.631753] usb usb8: Product: OHCI Host Controller [ 1.631955] usb usb8: Manufacturer: Linux 2.6.31.6 ohci_hcd [ 1.632104] usb usb8: SerialNumber: 0000:06:01.1 [ 1.632430] usb usb8: uevent [ 1.632529] usb usb8: usb_probe_device [ 1.632533] usb usb8: configuration #1 chosen from 1 choice [ 1.632770] usb usb8: adding 8-0:1.0 (config #1, interface 0) [ 1.632793] usb 8-0:1.0: uevent [ 1.632873] hub 8-0:1.0: usb_probe_interface [ 1.632876] hub 8-0:1.0: usb_probe_interface - got id [ 1.632879] hub 8-0:1.0: USB hub found [ 1.633125] hub 8-0:1.0: 2 ports detected [ 1.633327] hub 8-0:1.0: standalone hub [ 1.633329] hub 8-0:1.0: no power switching (usb 1.0) [ 1.633332] hub 8-0:1.0: global over-current protection [ 1.633335] hub 8-0:1.0: power on to power good time: 30ms [ 1.633344] hub 8-0:1.0: local power source is good [ 1.633347] hub 8-0:1.0: no over-current condition exists [ 1.633350] hub 8-0:1.0: trying to enable port power on non-switchable hub [ 1.633374] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 1.633501] uhci_hcd: USB Universal Host Controller Interface driver [ 1.634435] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 1.634643] xen: registering gsi 16 triggering 0 polarity 1 [ 1.634646] xen_allocate_pirq: returning irq 16 for gsi 16 [ 1.634850] xen: --> irq=16 [ 1.634854] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1 [ 1.635004] uhci_hcd 0000:01:08.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16 [ 1.635004] uhci_hcd 0000:01:08.0: UHCI Host Controller [ 1.635871] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '009' [ 1.635988] uhci_hcd 0000:01:08.0: new USB bus registered, assigned bus number 9 [ 1.636373] uhci_hcd 0000:01:08.0: detected 2 ports [ 1.636580] uhci_hcd 0000:01:08.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.636583] uhci_hcd 0000:01:08.0: Performing full reset [ 1.636603] uhci_hcd 0000:01:08.0: supports USB remote wakeup [ 1.636614] uhci_hcd 0000:01:08.0: irq 16, io base 0x0000ec00 [ 1.636925] usb usb9: default language 0x0409 [ 1.636937] usb usb9: udev 1, busnum 9, minor = 1024 [ 1.636940] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.637149] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.637365] usb usb9: Product: UHCI Host Controller [ 1.637365] usb usb9: Manufacturer: Linux 2.6.31.6 uhci_hcd [ 1.637365] usb usb9: SerialNumber: 0000:01:08.0 [ 1.638149] usb 3-1: new high speed USB device using ehci_hcd and address 2 [ 1.638436] usb usb9: uevent [ 1.638517] usb usb9: usb_probe_device [ 1.638521] usb usb9: configuration #1 chosen from 1 choice [ 1.638762] usb usb9: adding 9-0:1.0 (config #1, interface 0) [ 1.638783] usb 9-0:1.0: uevent [ 1.638858] hub 9-0:1.0: usb_probe_interface [ 1.638861] hub 9-0:1.0: usb_probe_interface - got id [ 1.638864] hub 9-0:1.0: USB hub found [ 1.639091] hub 9-0:1.0: 2 ports detected [ 1.639292] hub 9-0:1.0: standalone hub [ 1.639294] hub 9-0:1.0: no power switching (usb 1.0) [ 1.639297] hub 9-0:1.0: individual port over-current protection [ 1.639300] hub 9-0:1.0: power on to power good time: 2ms [ 1.639307] hub 9-0:1.0: local power source is good [ 1.639311] hub 9-0:1.0: trying to enable port power on non-switchable hub [ 1.639336] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 1.639905] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 1.640083] xen: registering gsi 17 triggering 0 polarity 1 [ 1.640083] alloc irq_desc for 17 on node 0 [ 1.640083] alloc kstat_irqs on node 0 [ 1.640135] xen: --> irq=17 [ 1.640138] xen_set_ioapic_routing: irq 17 gsi 17 vector 17 ioapic 0 pin 17 triggering 1 polarity 1 [ 1.640518] uhci_hcd 0000:01:08.1: PCI INT B -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17 [ 1.640898] uhci_hcd 0000:01:08.1: UHCI Host Controller [ 1.641141] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '010' [ 1.641253] uhci_hcd 0000:01:08.1: new USB bus registered, assigned bus number 10 [ 1.641634] uhci_hcd 0000:01:08.1: detected 2 ports [ 1.641840] uhci_hcd 0000:01:08.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.641843] uhci_hcd 0000:01:08.1: Performing full reset [ 1.641863] uhci_hcd 0000:01:08.1: supports USB remote wakeup [ 1.641897] uhci_hcd 0000:01:08.1: irq 17, io base 0x0000e800 [ 1.642186] usb usb10: default language 0x0409 [ 1.642198] usb usb10: udev 1, busnum 10, minor = 1152 [ 1.642201] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.642434] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.642801] usb usb10: Product: UHCI Host Controller [ 1.643004] usb usb10: Manufacturer: Linux 2.6.31.6 uhci_hcd [ 1.643154] usb usb10: SerialNumber: 0000:01:08.1 [ 1.643458] usb usb10: uevent [ 1.643537] usb usb10: usb_probe_device [ 1.643540] usb usb10: configuration #1 chosen from 1 choice [ 1.643764] usb usb10: adding 10-0:1.0 (config #1, interface 0) [ 1.643783] usb 10-0:1.0: uevent [ 1.643855] hub 10-0:1.0: usb_probe_interface [ 1.643858] hub 10-0:1.0: usb_probe_interface - got id [ 1.643861] hub 10-0:1.0: USB hub found [ 1.644087] hub 10-0:1.0: 2 ports detected [ 1.644288] hub 10-0:1.0: standalone hub [ 1.644291] hub 10-0:1.0: no power switching (usb 1.0) [ 1.644293] hub 10-0:1.0: individual port over-current protection [ 1.644297] hub 10-0:1.0: power on to power good time: 2ms [ 1.644304] hub 10-0:1.0: local power source is good [ 1.644307] hub 10-0:1.0: trying to enable port power on non-switchable hub [ 1.644329] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 1.644548] usbcore: registered new interface driver usblp [ 1.644755] Initializing USB Mass Storage driver... [ 1.645074] usbcore: registered new interface driver usb-storage [ 1.645307] USB Mass Storage support registered. [ 1.645618] usbcore: registered new interface driver libusual [ 1.646135] PNP: No PS/2 controller found. Probing ports directly. [ 1.646932] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.647143] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.647570] mice: PS/2 mouse device common for all mice [ 1.648347] rtc_cmos 00:05: RTC can wake from S4 [ 1.648662] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.648930] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 1.649812] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx [ 1.650454] cpuidle: using governor ladder [ 1.650676] cpuidle: using governor menu [ 1.653152] usbcore: registered new interface driver hiddev [ 1.653465] usbcore: registered new interface driver usbhid [ 1.653671] usbhid: v2.6:USB HID core driver [ 1.654271] Advanced Linux Sound Architecture Driver Version 1.0.20. [ 1.659315] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21 [ 1.659527] xen: registering gsi 21 triggering 0 polarity 1 [ 1.659531] xen_allocate_pirq: returning irq 21 for gsi 21 [ 1.659734] xen: --> irq=21 [ 1.659738] xen_set_ioapic_routing: irq 21 gsi 21 vector 21 ioapic 0 pin 21 triggering 1 polarity 1 [ 1.660008] HDA Intel 0000:00:07.0: PCI INT A -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21 [ 1.660008] HDA Intel 0000:00:07.0: setting latency timer to 64 [ 1.689345] ehci_hcd 0000:01:08.2: port 1 high speed [ 1.689351] ehci_hcd 0000:01:08.2: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT [ 1.739022] uhci_hcd 0000:01:08.0: port 1 portsc 008a,00 [ 1.739044] uhci_hcd 0000:01:08.0: port 2 portsc 008a,00 [ 1.744023] uhci_hcd 0000:01:08.1: port 1 portsc 008a,00 [ 1.744043] uhci_hcd 0000:01:08.1: port 2 portsc 008a,00 [ 1.752989] usb 3-1: default language 0x0409 [ 1.753368] usb 3-1: udev 2, busnum 3, minor = 257 [ 1.753371] usb 3-1: New USB device found, idVendor=05e3, idProduct=0608 [ 1.753580] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.753787] usb 3-1: Product: USB2.0 Hub [ 1.754063] usb 3-1: uevent [ 1.754147] usb 3-1: usb_probe_device [ 1.754151] usb 3-1: configuration #1 chosen from 1 choice [ 1.754622] usb 3-1: adding 3-1:1.0 (config #1, interface 0) [ 1.754642] usb 3-1:1.0: uevent [ 1.754736] hub 3-1:1.0: usb_probe_interface [ 1.754739] hub 3-1:1.0: usb_probe_interface - got id [ 1.754742] hub 3-1:1.0: USB hub found [ 1.755245] hub 3-1:1.0: 4 ports detected [ 1.755446] hub 3-1:1.0: standalone hub [ 1.755449] hub 3-1:1.0: ganged power switching [ 1.755451] hub 3-1:1.0: global over-current protection [ 1.755454] hub 3-1:1.0: Single TT [ 1.755457] hub 3-1:1.0: TT requires at most 32 FS bit times (2664 ns) [ 1.755460] hub 3-1:1.0: Port indicators are supported [ 1.755463] hub 3-1:1.0: power on to power good time: 100ms [ 1.755864] hub 3-1:1.0: local power source is good [ 1.755867] hub 3-1:1.0: no over-current condition exists [ 1.755870] hub 3-1:1.0: enabling power on all ports [ 1.757008] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '002' [ 1.757040] hub 4-0:1.0: state 7 ports 5 chg 0018 evt 0000 [ 1.757049] hub 4-0:1.0: port 3, status 0501, change 0000, 480 Mb/s [ 1.757059] ehci_hcd 0000:06:01.2: port 3 low speed --> companion [ 1.807020] ehci_hcd 0000:06:01.2: GetStatus port 3 status 003402 POWER OWNER sig=k CSC [ 1.807047] hub 4-0:1.0: port 4, status 0501, change 0000, 480 Mb/s [ 1.857252] hub 3-1:1.0: port 4: status 0101 change 0001 [ 1.858174] ehci_hcd 0000:06:01.2: port 4 high speed [ 1.858178] ehci_hcd 0000:06:01.2: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT [ 1.909021] usb 4-4: new high speed USB device using ehci_hcd and address 3 [ 1.957019] usb 3-1: link qh256-0001/ffff88002dd17180 start 1 [1/0 us] [ 1.961178] ehci_hcd 0000:06:01.2: port 4 high speed [ 1.961182] ehci_hcd 0000:06:01.2: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT [ 2.024458] usb 4-4: udev 3, busnum 4, minor = 386 [ 2.024462] usb 4-4: New USB device found, idVendor=eb1a, idProduct=2860 [ 2.024674] usb 4-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.024930] usb 4-4: uevent [ 2.025025] usb 4-4: usb_probe_device [ 2.025029] usb 4-4: configuration #1 chosen from 1 choice [ 2.032822] usb 4-4: adding 4-4:1.0 (config #1, interface 0) [ 2.032842] usb 4-4:1.0: uevent [ 2.032961] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '003' [ 2.032988] hub 6-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 2.032995] hub 5-0:1.0: state 7 ports 6 chg 0040 evt 0000 [ 2.033012] hub 5-0:1.0: port 6, status 0301, change 0000, 1.5 Mb/s [ 2.041260] ALSA device list: [ 2.041461] #0: HDA NVidia at 0xfe020000 irq 21 [ 2.041724] Netfilter messages via NETLINK v0.30. [ 2.041946] nf_conntrack version 0.5.0 (6144 buckets, 24576 max) [ 2.042502] ctnetlink v0.93: registering with nfnetlink. [ 2.043317] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.043548] TCP cubic registered [ 2.043747] Initializing XFRM netlink socket [ 2.044376] NET: Registered protocol family 10 [ 2.046118] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 2.046385] IPv6 over IPv4 tunneling driver [ 2.047377] NET: Registered protocol family 17 [ 2.047894] RPC: Registered udp transport module. [ 2.048099] RPC: Registered tcp transport module. [ 2.048666] PM: Resume from disk failed. [ 2.048690] registered taskstats version 1 [ 2.049105] Magic number: 5:825:927 [ 2.049388] block loop87: hash matches [ 2.049806] Freeing unused kernel memory: 528k freed [ 2.050005] Write protecting the kernel read-only data: 8312k [ 2.140035] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00100303 PRSC LSDA PPS PES CCS [ 2.191041] usb 5-6: new low speed USB device using ohci_hcd and address 2 [ 2.299043] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00100303 PRSC LSDA PPS PES CCS [ 2.317110] usb usb5: uevent [ 2.317143] usb 5-0:1.0: uevent [ 2.317236] usb usb1: uevent [ 2.317276] usb 1-0:1.0: uevent [ 2.317380] usb usb6: uevent [ 2.317412] usb 6-0:1.0: uevent [ 2.317501] usb usb2: uevent [ 2.317537] usb 2-0:1.0: uevent [ 2.318248] usb usb9: uevent [ 2.318280] usb 9-0:1.0: uevent [ 2.318400] usb usb10: uevent [ 2.318432] usb 10-0:1.0: uevent [ 2.318525] usb usb3: uevent [ 2.318557] usb 3-0:1.0: uevent [ 2.318592] usb 3-1: uevent [ 2.318625] usb 3-1:1.0: uevent [ 2.319819] usb usb7: uevent [ 2.319852] usb 7-0:1.0: uevent [ 2.319946] usb usb8: uevent [ 2.319980] usb 8-0:1.0: uevent [ 2.321104] usb usb4: uevent [ 2.321138] usb 4-0:1.0: uevent [ 2.321176] usb 4-4: uevent [ 2.321209] usb 4-4:1.0: uevent [ 2.373071] usb 5-6: skipped 1 descriptor after interface [ 2.373077] usb 5-6: skipped 1 descriptor after interface [ 2.376058] usb 5-6: default language 0x0409 [ 2.382057] usb 5-6: udev 2, busnum 5, minor = 513 [ 2.382062] usb 5-6: New USB device found, idVendor=046d, idProduct=c517 [ 2.382284] usb 5-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.382500] usb 5-6: Product: USB Receiver [ 2.382699] usb 5-6: Manufacturer: Logitech [ 2.383037] usb 5-6: uevent [ 2.383056] usb 5-6: usb_probe_device [ 2.383061] usb 5-6: configuration #1 chosen from 1 choice [ 2.385064] usb 5-6: adding 5-6:1.0 (config #1, interface 0) [ 2.385107] usb 5-6:1.0: uevent [ 2.385135] usbhid 5-6:1.0: usb_probe_interface [ 2.385138] usbhid 5-6:1.0: usb_probe_interface - got id [ 2.392402] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb5/5-6/5-6:1.0/input/input3 [ 2.392891] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-6/input0 [ 2.393308] usb 5-6: adding 5-6:1.1 (config #1, interface 1) [ 2.393329] usb 5-6:1.1: uevent [ 2.393350] usbhid 5-6:1.1: usb_probe_interface [ 2.393353] usbhid 5-6:1.1: usb_probe_interface - got id [ 2.402039] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor [ 2.403220] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb5/5-6/5-6:1.1/input/input4 [ 2.403662] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/file.c: looking for a minor, starting at 96 [ 2.403734] logitech 0003:046D:C517.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-6/input1 [ 2.404142] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '002' [ 2.404172] hub 7-0:1.0: state 7 ports 3 chg 0000 evt 0004 [ 2.404182] ohci_hcd 0000:06:01.0: GetStatus roothub.portstatus [1] = 0x00010301 CSC LSDA PPS CCS [ 2.404190] hub 7-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s [ 2.508038] hub 7-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301 [ 2.614049] ohci_hcd 0000:06:01.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS [ 2.665158] usb 7-2: new low speed USB device using ohci_hcd and address 2 [ 2.704277] ohci_hcd 0000:00:04.0: auto-stop root hub [ 2.705026] ohci_hcd 0000:06:01.1: auto-stop root hub [ 2.773162] ohci_hcd 0000:06:01.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS [ 2.839766] ohci_hcd 0000:06:01.0: urb ffff88002dd9dc00 path 2 ep0in 5ed60000 cc 5 --> status -62 [ 2.849825] usb 7-2: skipped 1 descriptor after interface [ 2.852801] usb 7-2: default language 0x0409 [ 2.855764] ohci_hcd 0000:06:01.0: urb ffff88002dde8240 path 2 ep0in 5ed60000 cc 5 --> status -62 [ 2.866909] usb 7-2: udev 2, busnum 7, minor = 769 [ 2.866913] usb 7-2: New USB device found, idVendor=10cf, idProduct=5500 [ 2.867009] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.867009] usb 7-2: Product: USB K8055 [ 2.867009] usb 7-2: Manufacturer: Velleman [ 2.867898] usb 7-2: uevent [ 2.867919] usb 7-2: usb_probe_device [ 2.867923] usb 7-2: configuration #1 chosen from 1 choice [ 2.872920] usb 7-2: adding 7-2:1.0 (config #1, interface 0) [ 2.872962] usb 7-2:1.0: uevent [ 2.872993] usbhid 7-2:1.0: usb_probe_interface [ 2.872996] usbhid 7-2:1.0: usb_probe_interface - got id [ 2.882795] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/file.c: looking for a minor, starting at 96 [ 2.882901] generic-usb 0003:10CF:5500.0003: hiddev97,hidraw2: USB HID v1.00 Device [Velleman USB K8055] on usb-0000:06:01.0-2/input0 [ 2.883355] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '002' [ 2.883385] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 2.883392] hub 4-0:1.0: state 7 ports 5 chg 0000 evt 0008 [ 2.883407] hub 9-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 2.883412] hub 10-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 2.883417] hub 3-1:1.0: state 7 ports 4 chg 0010 evt 0000 [ 2.883807] hub 3-1:1.0: port 4, status 0101, change 0000, 12 Mb/s [ 2.948536] usb 3-1.4: new high speed USB device using ehci_hcd and address 3 [ 2.955036] usb usb9: suspend_rh (auto-stop) [ 2.955066] usb usb10: suspend_rh (auto-stop) [ 2.960408] hub 3-1:1.0: port 4 not reset yet, waiting 10ms [ 3.037408] usb 3-1.4: skipped 4 descriptors after interface [ 3.037413] usb 3-1.4: skipped 2 descriptors after interface [ 3.037417] usb 3-1.4: skipped 1 descriptor after endpoint [ 3.037421] usb 3-1.4: skipped 2 descriptors after interface [ 3.037424] usb 3-1.4: skipped 1 descriptor after endpoint [ 3.037427] usb 3-1.4: skipped 2 descriptors after interface [ 3.037431] usb 3-1.4: skipped 1 descriptor after endpoint [ 3.037434] usb 3-1.4: skipped 2 descriptors after interface [ 3.037437] usb 3-1.4: skipped 1 descriptor after endpoint [ 3.037440] usb 3-1.4: skipped 2 descriptors after interface [ 3.037443] usb 3-1.4: skipped 1 descriptor after endpoint [ 3.037516] usb 3-1.4: default language 0x0409 [ 3.044296] usb 3-1.4: udev 3, busnum 3, minor = 258 [ 3.044301] usb 3-1.4: New USB device found, idVendor=2304, idProduct=0208 [ 3.044531] usb 3-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 3.044898] usb 3-1.4: Product: PCTV USB2 PAL [ 3.045005] usb 3-1.4: Manufacturer: Pinnacle Systems GmbH [ 3.045409] usb 3-1.4: uevent [ 3.045428] usb 3-1.4: usb_probe_device [ 3.045432] usb 3-1.4: configuration #1 chosen from 1 choice [ 3.045790] usb 3-1.4: adding 3-1.4:1.0 (config #1, interface 0) [ 3.045813] usb 3-1.4:1.0: uevent [ 3.045871] usb 3-1.4: adding 3-1.4:1.1 (config #1, interface 1) [ 3.045891] usb 3-1.4:1.1: uevent [ 3.045908] usb 3-1.4: adding 3-1.4:1.2 (config #1, interface 2) [ 3.045929] usb 3-1.4:1.2: uevent [ 3.045948] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '003' [ 3.045978] hub 5-0:1.0: state 7 ports 6 chg 0000 evt 0040 [ 3.045988] hub 7-0:1.0: state 7 ports 3 chg 0000 evt 0004 [ 3.705353] hub 2-0:1.0: hub_suspend [ 3.705364] usb usb2: bus auto-suspend [ 3.705367] ehci_hcd 0000:00:04.1: suspend root hub [ 3.705385] hub 1-0:1.0: hub_suspend [ 3.705389] usb usb1: bus auto-suspend [ 3.705392] ehci_hcd 0000:00:02.1: suspend root hub [ 4.333079] PM: Starting manual resume from disk [ 4.333258] PM: Resume from partition 252:1 [ 4.333258] PM: Checking hibernation image. [ 4.349033] PM: Resume from disk failed. [ 4.382383] kjournald starting. Commit interval 5 seconds [ 4.382397] EXT3-fs: mounted filesystem with journal data mode. [ 4.704025] hub 6-0:1.0: hub_suspend [ 4.704035] usb usb6: bus auto-suspend [ 4.704040] ohci_hcd 0000:00:04.0: suspend root hub [ 5.369414] udevd version 125 started [ 5.564743] usb usb5: uevent [ 5.564778] usb 5-0:1.0: uevent [ 5.564815] usb 5-6: uevent [ 5.564847] usb 5-6:1.0: uevent [ 5.565046] usb 5-6:1.1: uevent [ 5.565360] usb usb1: uevent [ 5.565391] usb 1-0:1.0: uevent [ 5.565482] usb usb6: uevent [ 5.565519] usb 6-0:1.0: uevent [ 5.565611] usb usb2: uevent [ 5.565652] usb 2-0:1.0: uevent [ 5.566434] usb usb9: uevent [ 5.566469] usb 9-0:1.0: uevent [ 5.566563] usb usb10: uevent [ 5.566596] usb 10-0:1.0: uevent [ 5.566688] usb usb3: uevent [ 5.566720] usb 3-0:1.0: uevent [ 5.566755] usb 3-1: uevent [ 5.566792] usb 3-1.4: uevent [ 5.566825] usb 3-1.4:1.0: uevent [ 5.566860] usb 3-1.4:1.1: uevent [ 5.566895] usb 3-1.4:1.2: uevent [ 5.566929] usb 3-1:1.0: uevent [ 5.569551] usb usb7: uevent [ 5.569587] usb 7-0:1.0: uevent [ 5.569625] usb 7-2: uevent [ 5.569662] usb 7-2:1.0: uevent [ 5.569858] usb usb8: uevent [ 5.569891] usb 8-0:1.0: uevent [ 5.569985] usb usb4: uevent [ 5.570031] usb 4-0:1.0: uevent [ 5.570068] usb 4-4: uevent [ 5.570102] usb 4-4:1.0: uevent [ 5.704026] hub 8-0:1.0: hub_suspend [ 5.704036] usb usb8: bus auto-suspend [ 5.704041] ohci_hcd 0000:06:01.1: suspend root hub [ 5.704049] hub 9-0:1.0: hub_suspend [ 5.704053] usb usb9: bus auto-suspend [ 5.704057] usb usb9: suspend_rh [ 5.704078] hub 10-0:1.0: hub_suspend [ 5.704083] usb usb10: bus auto-suspend [ 5.704085] usb usb10: suspend_rh [ 6.540772] ata1.00: configured for UDMA/133 [ 6.541164] ata1: EH complete [ 8.481173] ata1.00: configured for UDMA/133 [ 8.481230] ata1: EH complete [ 8.914259] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 8.919401] EXT3 FS on dm-0, internal journal [ 12.994033] kjournald starting. Commit interval 5 seconds [ 13.004472] EXT3 FS on sda1, internal journal [ 13.004747] EXT3-fs: mounted filesystem with writeback data mode. [ 13.086281] kjournald starting. Commit interval 5 seconds [ 13.094529] EXT3 FS on dm-2, internal journal [ 13.094803] EXT3-fs: recovery complete. [ 13.102882] EXT3-fs: mounted filesystem with writeback data mode. [ 13.129511] kjournald starting. Commit interval 5 seconds [ 13.135720] EXT3 FS on dm-3, internal journal [ 13.135992] EXT3-fs: mounted filesystem with writeback data mode. [ 13.165072] kjournald starting. Commit interval 5 seconds [ 13.176062] EXT3 FS on dm-4, internal journal [ 13.176334] EXT3-fs: mounted filesystem with writeback data mode. [ 13.205679] kjournald starting. Commit interval 5 seconds [ 13.213025] EXT3 FS on dm-5, internal journal [ 13.213296] EXT3-fs: mounted filesystem with writeback data mode. [ 13.234442] kjournald starting. Commit interval 5 seconds [ 13.245707] EXT3 FS on dm-6, internal journal [ 13.245979] EXT3-fs: mounted filesystem with writeback data mode. [ 13.281015] kjournald starting. Commit interval 5 seconds [ 13.287353] EXT3 FS on dm-9, internal journal [ 13.287626] EXT3-fs: mounted filesystem with writeback data mode. [ 13.309909] kjournald starting. Commit interval 5 seconds [ 13.322647] EXT3 FS on dm-7, internal journal [ 13.322919] EXT3-fs: mounted filesystem with writeback data mode. [ 13.353359] Adding 2097144k swap on /dev/mapper/serveerstertje-swap. Priority:-1 extents:1 across:2097144k [ 14.762066] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 14.763840] alloc irq_desc for 404 on node 0 [ 14.763845] alloc kstat_irqs on node 0 [ 16.345999] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 16.346004] 0000:07:00.0: eth1: 10/100 speed: disabling TSO [ 16.346868] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 17.343577] eth1: IPv6 duplicate address detected! [ 22.863801] alloc irq_desc for 403 on node 0 [ 22.863805] alloc kstat_irqs on node 0 [ 22.863868] xenbus_probe wake_waiting [ 22.863872] alloc irq_desc for 402 on node 0 [ 22.863875] alloc kstat_irqs on node 0 [ 22.870024] xenbus_probe wake_waiting [ 22.871310] XENBUS: Unable to read cpu state [ 22.872098] XENBUS: Unable to read cpu state [ 22.872792] xenbus_probe_devices backend [ 22.873178] xenbus_probe_devices failed xenbus_directory [ 22.873385] backend_probe_and_watch devices probed ok [ 22.873722] backend_probe_and_watch watch add ok ok [ 22.873926] backend_probe_and_watch all done [ 22.874005] xenbus_probe_devices device [ 22.877164] xenbus_probe_devices failed xenbus_directory [ 22.877396] frontend_probe_and_watch devices probed ok [ 22.877759] frontend_probe_and_watch watch add ok ok [ 22.877962] frontend_probe_and_watch all done [ 24.481261] vpn_bridge: no IPv6 routers present [ 24.967013] xen_bridge: no IPv6 routers present [ 25.044009] eth0: no IPv6 routers present [ 36.895962] device vif5.0 entered promiscuous mode [ 36.902982] xen_bridge: port 1(vif5.0) entering learning state [ 36.919544] xen_bridge: port 1(vif5.0) entering disabled state [ 36.922248] xen_bridge: port 1(vif5.0) entering disabled state [ 40.774989] device vif6.0 entered promiscuous mode [ 40.822470] xen_bridge: port 1(vif6.0) entering learning state [ 41.123830] xen_bridge: port 1(vif6.0) entering disabled state [ 41.126539] xen_bridge: port 1(vif6.0) entering disabled state [ 43.013173] alloc irq_desc for 401 on node 0 [ 43.013178] alloc kstat_irqs on node 0 [ 43.332259] alloc irq_desc for 400 on node 0 [ 43.332264] alloc kstat_irqs on node 0 [ 43.500504] device vif7.0 entered promiscuous mode [ 43.512551] xen_bridge: port 1(vif7.0) entering learning state [ 53.738269] vif7.0: no IPv6 routers present [ 56.208373] blkback: ring-ref 2047, event-channel 4, protocol 1 (x86_64-abi) [ 56.208649] alloc irq_desc for 399 on node 0 [ 56.208653] alloc kstat_irqs on node 0 [ 56.216348] blkback: ring-ref 2046, event-channel 5, protocol 1 (x86_64-abi) [ 56.216587] alloc irq_desc for 398 on node 0 [ 56.216590] alloc kstat_irqs on node 0 [ 58.541228] xen_bridge: port 1(vif7.0) entering forwarding state [ 62.835136] frontend_changed: backend/vbd/7/2049: prepare for reconnect [ 62.838801] frontend_changed: backend/vbd/7/2050: prepare for reconnect [ 63.060353] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi) [ 63.066629] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 63.066878] alloc irq_desc for 397 on node 0 [ 63.066881] alloc kstat_irqs on node 0 [ 63.105805] alloc irq_desc for 396 on node 0 [ 63.105810] alloc kstat_irqs on node 0 [ 63.778165] alloc irq_desc for 395 on node 0 [ 63.778170] alloc kstat_irqs on node 0 [ 63.910721] device vif8.0 entered promiscuous mode [ 63.922989] xen_bridge: port 2(vif8.0) entering learning state [ 69.228673] blkback: ring-ref 2047, event-channel 4, protocol 1 (x86_64-abi) [ 69.228938] alloc irq_desc for 394 on node 0 [ 69.228941] alloc kstat_irqs on node 0 [ 69.242262] blkback: ring-ref 2046, event-channel 5, protocol 1 (x86_64-abi) [ 69.242524] alloc irq_desc for 393 on node 0 [ 69.242527] alloc kstat_irqs on node 0 [ 74.870289] vif8.0: no IPv6 routers present [ 75.810172] frontend_changed: backend/vbd/8/2049: prepare for reconnect [ 75.813445] frontend_changed: backend/vbd/8/2050: prepare for reconnect [ 76.140320] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi) [ 76.140583] alloc irq_desc for 392 on node 0 [ 76.140587] alloc kstat_irqs on node 0 [ 76.225174] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 76.225435] alloc irq_desc for 391 on node 0 [ 76.225439] alloc kstat_irqs on node 0 [ 76.332710] alloc irq_desc for 390 on node 0 [ 76.332714] alloc kstat_irqs on node 0 [ 76.386096] device vif9.0 entered promiscuous mode [ 76.414833] xen_bridge: port 3(vif9.0) entering learning state [ 78.923358] xen_bridge: port 2(vif8.0) entering forwarding state [ 81.135043] blkback: ring-ref 2047, event-channel 4, protocol 1 (x86_64-abi) [ 81.135294] alloc irq_desc for 389 on node 0 [ 81.135297] alloc kstat_irqs on node 0 [ 81.144565] blkback: ring-ref 2046, event-channel 5, protocol 1 (x86_64-abi) [ 81.144813] alloc irq_desc for 388 on node 0 [ 81.144816] alloc kstat_irqs on node 0 [ 87.126401] vif9.0: no IPv6 routers present [ 88.017715] frontend_changed: backend/vbd/9/2049: prepare for reconnect [ 88.021809] frontend_changed: backend/vbd/9/2050: prepare for reconnect [ 88.236234] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi) [ 88.242402] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 88.242659] alloc irq_desc for 387 on node 0 [ 88.242663] alloc kstat_irqs on node 0 [ 88.318367] alloc irq_desc for 386 on node 0 [ 88.318372] alloc kstat_irqs on node 0 [ 88.890996] alloc irq_desc for 385 on node 0 [ 88.891006] alloc kstat_irqs on node 0 [ 89.110147] device vif10.0 entered promiscuous mode [ 89.124794] xen_bridge: port 4(vif10.0) entering learning state [ 91.415274] xen_bridge: port 3(vif9.0) entering forwarding state [ 94.127208] blkback: ring-ref 2047, event-channel 4, protocol 1 (x86_64-abi) [ 94.127461] alloc irq_desc for 384 on node 0 [ 94.127465] alloc kstat_irqs on node 0 [ 94.137721] blkback: ring-ref 2046, event-channel 5, protocol 1 (x86_64-abi) [ 94.138022] alloc irq_desc for 383 on node 0 [ 94.138027] alloc kstat_irqs on node 0 [ 99.279014] vif10.0: no IPv6 routers present [ 100.547294] alloc irq_desc for 382 on node 0 [ 100.547299] alloc kstat_irqs on node 0 [ 100.671665] frontend_changed: backend/vbd/10/2049: prepare for reconnect [ 100.680182] frontend_changed: backend/vbd/10/2050: prepare for reconnect [ 100.960133] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi) [ 100.975104] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 101.050714] alloc irq_desc for 381 on node 0 [ 101.050719] alloc kstat_irqs on node 0 [ 101.100575] alloc irq_desc for 380 on node 0 [ 101.100579] alloc kstat_irqs on node 0 [ 101.291924] device vif11.0 entered promiscuous mode [ 101.306010] xen_bridge: port 5(vif11.0) entering learning state [ 104.140576] xen_bridge: port 4(vif10.0) entering forwarding state [ 106.259759] blkback: ring-ref 2047, event-channel 4, protocol 1 (x86_64-abi) [ 106.260121] alloc irq_desc for 379 on node 0 [ 106.260125] alloc kstat_irqs on node 0 [ 106.285503] blkback: ring-ref 2046, event-channel 5, protocol 1 (x86_64-abi) [ 106.285758] alloc irq_desc for 378 on node 0 [ 106.285761] alloc kstat_irqs on node 0 [ 112.051009] vif11.0: no IPv6 routers present [ 112.611335] alloc irq_desc for 377 on node 0 [ 112.611340] alloc kstat_irqs on node 0 [ 112.957314] frontend_changed: backend/vbd/11/2049: prepare for reconnect [ 112.962571] frontend_changed: backend/vbd/11/2050: prepare for reconnect [ 113.178789] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi) [ 113.186888] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 113.279541] alloc irq_desc for 376 on node 0 [ 113.279546] alloc kstat_irqs on node 0 [ 113.611379] device vif12.0 entered promiscuous mode [ 113.615226] xen_bridge: port 6(vif12.0) entering learning state [ 114.071508] xen_bridge: port 6(vif12.0) entering disabled state [ 114.074248] xen_bridge: port 6(vif12.0) entering disabled state [ 116.305037] xen_bridge: port 5(vif11.0) entering forwarding state [ 116.345201] alloc irq_desc for 375 on node 0 [ 116.345205] alloc kstat_irqs on node 0 [ 116.661053] device vif13.0 entered promiscuous mode [ 116.680675] xen_bridge: port 6(vif13.0) entering learning state [ 126.272798] blkback: ring-ref 2047, event-channel 4, protocol 1 (x86_64-abi) [ 126.273070] alloc irq_desc for 374 on node 0 [ 126.273074] alloc kstat_irqs on node 0 [ 126.286933] blkback: ring-ref 2046, event-channel 5, protocol 1 (x86_64-abi) [ 126.287202] alloc irq_desc for 373 on node 0 [ 126.287205] alloc kstat_irqs on node 0 [ 127.428012] vif13.0: no IPv6 routers present [ 131.680016] xen_bridge: port 6(vif13.0) entering forwarding state [ 132.483079] frontend_changed: backend/vbd/13/2049: prepare for reconnect [ 132.486720] frontend_changed: backend/vbd/13/2050: prepare for reconnect [ 132.700299] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi) [ 132.708453] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 132.750346] alloc irq_desc for 372 on node 0 [ 132.750352] alloc kstat_irqs on node 0 [ 132.773831] alloc irq_desc for 371 on node 0 [ 132.773836] alloc kstat_irqs on node 0 [ 134.019315] device vif14.0 entered promiscuous mode [ 134.028894] xen_bridge: port 7(vif14.0) entering learning state [ 134.317770] xen_bridge: port 7(vif14.0) entering disabled state [ 134.325276] xen_bridge: port 7(vif14.0) entering disabled state