On Sun, Sep 13, 2009 at 08:31:26AM +0800, Mr. Teo En Ming (Zhang Enming) wrote:
> I have disabled all USB support in the kernel but I still couldn't get pvops
> dom0-patched kernel 2.6.31 final to complete loading. All I get is a
> blinking cursor at the top left hand corner of the monitor.
>
Did you try "nomodeset" parameter for the dom0 kernel?
Have you tried setting up a serial console and capturing the kernel boot
messages?
-- Pasi
> --
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical
> Engineering)
> Alma Maters:
> (1) Singapore Polytechnic
> (2) National University of Singapore
> Blog URL: http://teo-en-ming-aka-zhang-enming.blogspot.com
> Email: space.time.universe@xxxxxxxxx
> MSN: teoenming@xxxxxxxxxxx
> Mobile Phone: +65-9648-9798
> Street: Bedok Reservoir Road
> Republic of Singapore
>
> On Sat, Sep 12, 2009 at 8:23 PM, Mr. Teo En Ming (Zhang Enming) <
> space.time.universe@xxxxxxxxx> wrote:
>
> > OK I have UHCI, OHCI, EHCI, and xHCI all disabled in the kernel but I still
> > can't get pvops dom 0 kernel 2.6.31 final to boot up completely.
> >
> > Really puzzled.
> >
> > --
> > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical
> > Engineering)
> > Alma Maters:
> > (1) Singapore Polytechnic
> > (2) National University of Singapore
> > Blog URL: http://teo-en-ming-aka-zhang-enming.blogspot.com
> > Email: space.time.universe@xxxxxxxxx
> > MSN: teoenming@xxxxxxxxxxx
> > Mobile Phone: +65-9648-9798
> > Street: Bedok Reservoir Road
> > Republic of Singapore
> >
> > On Sat, Sep 12, 2009 at 6:11 PM, Mr. Teo En Ming (Zhang Enming) <
> > space.time.universe@xxxxxxxxx> wrote:
> >
> >> I have disabled USB 1.0 and USB 2.0 drivers simultaneously and enabled USB
> >> 3.0 driver but the kernel stops loading.
> >>
> >> Then I totally disabled all USB support by passing the "nousb" parameter
> >> to the kernel but it still stops loading.
> >>
> >> pvops dom 0 2.6.31 final can't work.
> >>
> >> --
> >> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical
> >> Engineering)
> >> Alma Maters:
> >> (1) Singapore Polytechnic
> >> (2) National University of Singapore
> >> Blog URL: http://teo-en-ming-aka-zhang-enming.blogspot.com
> >> Email: space.time.universe@xxxxxxxxx
> >> MSN: teoenming@xxxxxxxxxxx
> >> Mobile Phone: +65-9648-9798
> >> Street: Bedok Reservoir Road
> >> Republic of Singapore
> >>
> >> On Sat, Sep 12, 2009 at 4:44 PM, Mr. Teo En Ming (Zhang Enming) <
> >> space.time.universe@xxxxxxxxx> wrote:
> >>
> >>> After disabling the USB 1.0 driver, but leaving the USB 2.0 driver
> >>> compiled statically into the kernel, I get an error with the USB 2.0
> >>> driver.
> >>> This means I cannot use either of the USB 1.0 and USB 2.0 drivers.
> >>>
> >>> Please refer to my blog post here:
> >>>
> >>>
> >>> http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/09/after-disabling-usb-10-host-controller.html
> >>>
> >>> --
> >>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical
> >>> Engineering)
> >>> Alma Maters:
> >>> (1) Singapore Polytechnic
> >>> (2) National University of Singapore
> >>> Blog URL: http://teo-en-ming-aka-zhang-enming.blogspot.com
> >>> Email: space.time.universe@xxxxxxxxx
> >>> MSN: teoenming@xxxxxxxxxxx
> >>> Mobile Phone: +65-9648-9798
> >>> Street: Bedok Reservoir Road
> >>> Republic of Singapore
> >>>
> >>> On Sat, Sep 12, 2009 at 10:52 AM, Mr. Teo En Ming (Zhang Enming) <
> >>> space.time.universe@xxxxxxxxx> wrote:
> >>>
> >>>> Hi,
> >>>>
> >>>> I have tried pvops dom 0 kernel 2.6.31 final from Jeremy's tree.
> >>>>
> >>>> But it gave me a USB host controller died error.
> >>>>
> >>>> Please refer to the error output here:
> >>>>
> >>>>
> >>>> http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/09/error-with-pv-ops-dom-0-kernel-2631.html
> >>>>
> >>>> --
> >>>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical
> >>>> Engineering)
> >>>> Alma Maters:
> >>>> (1) Singapore Polytechnic
> >>>> (2) National University of Singapore
> >>>> Blog URL: http://teo-en-ming-aka-zhang-enming.blogspot.com
> >>>> Email: space.time.universe@xxxxxxxxx
> >>>> MSN: teoenming@xxxxxxxxxxx
> >>>> Mobile Phone: +65-9648-9798
> >>>> Street: Bedok Reservoir Road
> >>>> Republic of Singapore
> >>>>
> >>>> On Sat, Sep 12, 2009 at 12:03 AM, Pasi Kärkkäinen <pasik@xxxxxx> wrote:
> >>>>
> >>>>> On Fri, Sep 11, 2009 at 11:37:15PM +0800, Mr. Teo En Ming (Zhang
> >>>>> Enming) wrote:
> >>>>> > Hi,
> >>>>> >
> >>>>> > Please refer to the disk I/O benchmark results here:
> >>>>> >
> >>>>> >
> >>>>> http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/09/disk-io-benchmark-results-with-xen.html
> >>>>> >
> >>>>> > Results show that Win XP HVM guest runs faster in 2.6.30-rc3 than
> >>>>> > 2.6.31-rc6.
> >>>>> >
> >>>>>
> >>>>> Btw you might also want to test with the latest rebase/master tree;
> >>>>> it's
> >>>>> at Linux 2.6.31 final now.
> >>>>>
> >>>>> -- Pasi
> >>>>>
> >>>>> > --
> >>>>> > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics)
> >>>>> BEng(Hons)(Mechanical
> >>>>> > Engineering)
> >>>>> > Alma Maters:
> >>>>> > (1) Singapore Polytechnic
> >>>>> > (2) National University of Singapore
> >>>>> > Blog URL: http://teo-en-ming-aka-zhang-enming.blogspot.com
> >>>>> > Email: space.time.universe@xxxxxxxxx
> >>>>> > MSN: teoenming@xxxxxxxxxxx
> >>>>> > Mobile Phone: +65-9648-9798
> >>>>> > Street: Bedok Reservoir Road
> >>>>> > Republic of Singapore
> >>>>> >
> >>>>> > On Fri, Sep 11, 2009 at 8:19 AM, Mr. Teo En Ming (Zhang Enming) <
> >>>>> > space.time.universe@xxxxxxxxx> wrote:
> >>>>> >
> >>>>> > > Hi,
> >>>>> > >
> >>>>> > > I will try to stop unnecessary services on Dom 0 and do a disk I/O
> >>>>> > > benchmark between WinXP domU on 2.6.30-rc3 and 2.6.31-rc6 tonight
> >>>>> (Singapore
> >>>>> > > time). That will be more conclusive.
> >>>>> > >
> >>>>> > > --
> >>>>> > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics)
> >>>>> BEng(Hons)(Mechanical
> >>>>> > > Engineering)
> >>>>> > > Alma Maters:
> >>>>> > > (1) Singapore Polytechnic
> >>>>> > > (2) National University of Singapore
> >>>>> > > Blog URL: http://teo-en-ming-aka-zhang-enming.blogspot.com
> >>>>> > > Email: space.time.universe@xxxxxxxxx
> >>>>> > > MSN: teoenming@xxxxxxxxxxx
> >>>>> > > Mobile Phone: +65-9648-9798
> >>>>> > > Street: Bedok Reservoir Road
> >>>>> > > Republic of Singapore
> >>>>> > >
> >>>>> > > On Fri, Sep 11, 2009 at 2:17 AM, Jeremy Fitzhardinge <
> >>>>> jeremy@xxxxxxxx>wrote:
> >>>>> > >
> >>>>> > >> On 09/10/09 07:03, Pasi Kärkkäinen wrote:
> >>>>> > >> > On Thu, Sep 10, 2009 at 08:28:03PM +0800, Mr. Teo En Ming (Zhang
> >>>>> Enming)
> >>>>> > >> wrote:
> >>>>> > >> >
> >>>>> > >> >> Dear All,
> >>>>> > >> >>
> >>>>> > >> >> Here is my latest video presentation on VGA passthrough. Please
> >>>>> check
> >>>>> > >> out my
> >>>>> > >> >> blog at http://teo-en-ming-aka-zhang-enming.blogspot.com/ or
> >>>>> the
> >>>>> > >> Youtube
> >>>>> > >> >> link at http://www.youtube.com/watch?v=1ia3IwG6tp4
> >>>>> > >> >>
> >>>>> > >> >> The "not enough free resources" problem for nVidia Geforce 8400
> >>>>> GS PCI
> >>>>> > >> >> Express x16 graphics card in earlier presentation videos:
> >>>>> > >> >>
> >>>>> > >> >> http://www.youtube.com/watch?v=HNEiSI...<
> >>>>> > >> http://www.youtube.com/watch?v=HNEiSInrav0>
> >>>>> > >> >>
> >>>>> > >> >> http://www.youtube.com/watch?v=_hOT_9...<
> >>>>> > >> http://www.youtube.com/watch?v=_hOT_9LIG5w>
> >>>>> > >> >>
> >>>>> > >> >> was fixed. Device manager in Windows XP HVM domU no longer
> >>>>> shows an
> >>>>> > >> >> exclamation mark besides the nVidia Geforce 8400 GS graphics
> >>>>> card. The
> >>>>> > >> >> device is working properly and the resources tab shows the
> >>>>> available
> >>>>> > >> memory
> >>>>> > >> >> ranges.
> >>>>> > >> >>
> >>>>> > >> >> Full VGA passthrough to Windows XP HVM guest operating system
> >>>>> using Xen
> >>>>> > >> >> virtualization has been realized. I am now able to run 3-D
> >>>>> video
> >>>>> > >> benchmarks
> >>>>> > >> >> on the passed through nVidia GeForce 8400 GS graphics card.
> >>>>> > >> >>
> >>>>> > >> >> All this is possible using Xen 3.5 hypervisor with Intel
> >>>>> supplied VGA
> >>>>> > >> >> passthrough patches. Instead of using pvops dom0 kernel
> >>>>> 2.6.31-rc6
> >>>>> > >> which
> >>>>> > >> >> causes Win XP domU to run slowly, I am now using pvops dom0
> >>>>> kernel
> >>>>> > >> >> 2.6.30-rc3.
> >>>>> > >> >>
> >>>>> > >> >>
> >>>>> > >> > Jeremy: Are you aware of any changes after 2.6.30-rc3 that could
> >>>>> cause
> >>>>> > >> > this HVM slowness?
> >>>>> > >> >
> >>>>> > >>
> >>>>> > >> I can't think of anything, unless the new swiotlb code is causing
> >>>>> > >> problems.
> >>>>> > >>
> >>>>> > >> > Any tips how it could be debugged?
> >>>>> > >> >
> >>>>> > >>
> >>>>> > >> It would help to isolate where the slowness is coming from. How
> >>>>> much
> >>>>> > >> slowdown are we talking about? Is the HVM domain doing lots of IO
> >>>>> at
> >>>>> > >> the time? Are there any processes using lots of time in dom0?
> >>>>> What's
> >>>>> > >> the interrupt rate like?
> >>>>> > >>
> >>>>> > >> J
> >>>>> > >>
> >>>>> > >
> >>>>> > >
> >>>>> > >
> >>>>> > >
> >>>>> > >
> >>>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>
> >>>
> >>>
> >>>
> >>
> >>
> >>
> >
> >
> >
> >
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home