[Xen-devel] RE: VGA Passthrough with Intel DQ45CB and NVIDIA Geforce 8400 GS PCI Express x16

["Teo En Ming (Zhang Enming)" <enming.teo@xxxxxxxxxxxxxxx>]

Hi Weidong,

 

What are the steps to go about doing it?

 

Regards,
 

Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)

Technical Support Engineer

Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541

Republic of Singapore
Mobile: +65-9648-9798
MSN: teoenming@xxxxxxxxxxx

 

---

From: Han, Weidong [mailto:weidong.han@xxxxxxxxx]
Sent: Tuesday, August 25, 2009 11:05 AM
To: 'enming.teo@xxxxxxxxxxxxxxx'
Cc: 'bengheng@xxxxxxxxxxxxxx'; 'xen-devel@xxxxxxxxxxxxxxxxxxx'; 'Alan Cox'
Subject: RE: VGA Passthrough with Intel DQ45CB and NVIDIA Geforce 8400 GS PCI Express x16

No. we observed those problems in your investigation.

 

Regards,

Weidong

---

From: Teo En Ming (Zhang Enming) [mailto:enming.teo@xxxxxxxxxxxxxxx]
Sent: 2009年8月25日 10:45
To: Han, Weidong
Cc: bengheng@xxxxxxxxxxxxxx; xen-devel@xxxxxxxxxxxxxxxxxxx; 'Alan Cox'
Subject: RE: VGA Passthrough with Intel DQ45CB and NVIDIA Geforce 8400 GS PCI Express x16

Hi Weidong,

 

Any detailed documentation for the two tasks you mentioned?

 

Regards,
 

Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)

Technical Support Engineer

Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541

Republic of Singapore
Mobile: +65-9648-9798
MSN: teoenming@xxxxxxxxxxx

 

---

From: Han, Weidong [mailto:weidong.han@xxxxxxxxx]
Sent: Tuesday, August 25, 2009 10:09 AM
To: 'enming.teo@xxxxxxxxxxxxxxx'
Cc: 'bengheng@xxxxxxxxxxxxxx'; 'xen-devel@xxxxxxxxxxxxxxxxxxx'; 'Alan Cox'
Subject: RE: VGA Passthrough with Intel DQ45CB and NVIDIA Geforce 8400 GS PCI Express x16

Per our investigation, you cannot copy VGA bios from host 0xc0000 to guest for secondary gfx assignment. You can load it from a file.

 

In addition, if you want to passthrough Nvidia G8400, you need to 1:1 map its MMIO BARs.

 

Regards,

Weidong

---

From: Mr. Teo En Ming (Zhang Enming) [mailto:enming.teo@xxxxxxxxxxxxxxx]
Sent: 2009年8月25日 8:59
To: enming.teo@xxxxxxxxxxxxxxx
Cc: bengheng@xxxxxxxxxxxxxx; xen-devel@xxxxxxxxxxxxxxxxxxx; Han, Weidong; Alan Cox
Subject: VGA Passthrough with Intel DQ45CB and NVIDIA Geforce 8400 GS PCI Express x16

Hi,

I should probably rename the subject of this email.

-- 
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) 
Technical Support Engineer 
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza 
Singapore 529541
Republic of Singapore
Mobile: +65-9648-9798
MSN: teoenming@xxxxxxxxxxx
Alma Maters: Singapore Polytechnic, National University of Singapore

On 08/25/2009 08:57 AM, Mr. Teo En Ming (Zhang Enming) wrote:

Dear Beng Heng,

I understand that you got VGA passthrough working with Intel DQ45CB and an PCI-E x16 ATI Graphics card.

I have Intel DQ45CB and NVIDIA Geforce 8400 GS PCI-E x16.

Could you share with me in details how you got VGA passthrough to work with ATI PCI-E x16 when you set onboard VGA as your primary video adapter?

Thank you.

-- 
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) 
Technical Support Engineer 
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza 
Singapore 529541
Republic of Singapore
Mobile: +65-9648-9798
MSN: teoenming@xxxxxxxxxxx
Alma Maters: Singapore Polytechnic, National University of Singapore

On 08/25/2009 08:49 AM, Mr. Teo En Ming (Zhang Enming) wrote:

Hi

When I boot up the computer using onboard Intel GMA 4500 as the primary VGA controller, I could still see the NVIDIA Geforce 8400 GS PCI Express x16 card in lspci.

00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 GS (rev a1)

-- 
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) 
Technical Support Engineer 
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza 
Singapore 529541
Republic of Singapore
Mobile: +65-9648-9798
MSN: teoenming@xxxxxxxxxxx
Alma Maters: Singapore Polytechnic, National University of Singapore

On 08/25/2009 03:35 AM, Mr. Teo En Ming (Zhang Enming) wrote:

I have already compiled CONFIG_PCI_STUB=y statically into the kernel.

-- 
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) 
Technical Support Engineer 
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza 
Singapore 529541
Republic of Singapore
Mobile: +65-9648-9798
MSN: teoenming@xxxxxxxxxxx
Alma Maters: Singapore Polytechnic, National University of Singapore

On 08/25/2009 03:33 AM, Mr. Teo En Ming (Zhang Enming) wrote:

I find that following the instructions here at Xen Wiki VtdHowTo don't work:

Binding Devices to pci-stub

If using pv-ops dom0, also can use pci-stub to hide devices for assignment (example PCI device 01:00.0) * lspci -n * locate the entry for device 01:00.0 and note down the vendor & device ID 8086:10b9 .

...
01:00.0 0200: 8086:10b9 (rev 06)
...

* then use following commands to hide it: .

echo "8086 10b9" > /sys/bus/pci/drivers/pci-stub/new_id
echo "0000:01:00.0" > /sys/bus/pci/devices/0000:01:00.0/driver/unbind
echo "0000:01:00.0" > /sys/bus/pci/drivers/pci-stub/bind

When I tried to "cat /sys/bus/pci/drivers/pci-stub/new_id", it says permission denied.

My NVIDIA graphics card is using BDF 01:00.0. When I change directory to 
/sys/bus/pci/devices/0000:01:00.0/, sub-directory driver is not found at all.

Then when I put in pci = [ '01:00.0' ] for the Windows XP Home HVM config, it complains about pciback but I am using paravirt-ops dom 0 kernel.

And when I tried the "xm pci-list-assignable-devices", nothing shows up.

I have already specified iommu=1 in grub.

Hope the Intel folks can assist in this matter.

-- 
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) 
Technical Support Engineer 
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza 
Singapore 529541
Republic of Singapore
Mobile: +65-9648-9798
MSN: teoenming@xxxxxxxxxxx
Alma Maters: Singapore Polytechnic, National University of Singapore

On 08/25/2009 03:23 AM, Mr. Teo En Ming (Zhang Enming) wrote:

I have both the onboard Intel GMA 4500 and the PCI Express x16 NVIDIA Geforce 8400 GS.

Ng Beng Heng at the University of Michigan has done it. He's using the same Intel DQ45CB as me.

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
  

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.65/2322 - Release Date: 08/24/09 12:55:00

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.65/2322 - Release Date: 08/24/09 12:55:00

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel