| |
|
 |
|
 |
|
|
|
| |
|
|
xen-devel
Re: [Xen-devel] Several vtpm patches and workarounds: persistence, stabi
Thanks. Can you provide a signed-off-by line for these patches? Then at
least some of them can go into the Xen repository.
-- Keir
On 21/08/2009 17:02, "Matt Fioravante" <Matthew.Fioravante@xxxxxxxxxx>
wrote:
> We are using xen and vtpm at JHU APL for a project and ran into many
> problems. I've had to develop several patches and workarounds and wanted
> to contribute them back to the xen community.
>
> Here are a few patches that will make the xen vtpm system more stable
> and allow you to have persistent vtpms. In other words you can reboot a
> domU and it will come back up with the same vtpm instance and retain all
> the keys and data you stored in it.
>
> Also included is a patch that ports vtpm to tpm_emulator-0.5.1. The new
> emulator has a lot of bug fixes over the old 0.4 and is recommended if
> you want a working vtpm implementation. This port is incomplete, so
> please see the details on that patch before applying it.
>
> Some of these are actual bug fixes while others are hacks/workarounds.
> Becuase of this, they have been broken into several patches to assist
> the developers in choosing which they want to integrate. With these
> patches we have been successfully able to use persistent vtpms for
> signing certificates.
>
> All of these patches can be applied on top of each other in any order.
> $ patch -p1 < patchfile
>
>
> Finally, there are also some bugs in the xen hotplug system and the
> vtpm_manager. Sometimes the manager can get into a corrupted state and
> it will cease to work properly. Workarounds for some of the problems are
> included at the end of this email.
>
>
> ==============================
> vtpm_manager-hash_error.patch
> ==============================
> There is a bug in the vtpm_manager that has to do with hashing and
> saving the NVM memory files (vtpm_dm_%d.data). The file is not truncated
> when it is written and this results in the hash becoming invalid because
> of the extra bits at the end of the file.
>
> This patch adds O_TRUNC to the flags when opening the file.
>
> More details on this issue are in the bug report on bugzilla
> http://bugzilla.xensource.com/bugzilla/show_bug.cgi?id=1488
>
> ==============================
> vtpm-uuid.patch
> ==============================
> Right now xen will create a new vtpm instance everytime you start up a
> domU, even if you specify the instance parameter in your config file.
> Each vtpm instance is then given a uuid and the vtpm.db file maps
> instance numbers to uuid numbers.
>
> This patch is a hack that lets you explicitly set the uuid of your vtpm
> instance. Everytime you boot up your domU now the vtpm will get that
> uuid and thus it will always get the same vtpm instance number instead
> of being generated a new one.
>
> So for example, in your config file you would do something like this
> vtpm = [ 'backend=0,uuid=dcdb124b-9fed-4040-b149-dd2dfd8d094c' ]
>
> If you are using this patch then be sure to also use the hash_error
> patch, otherwise you may see checksum failed messages when booting
> your domain and the vtpm tries to read the NVM file. These 2 patches
> were made separate because the first is a bug fix and this one is more
> of a hack.
>
> ==============================
> vtpm-0.4-persistence.patch
> ==============================
> This patch is only needed if you want to continue using
> tpm_emulator-0.4. It is not necessary if you are going to use the
> tpm_emulator-0.5.1 patch.
>
> This patch will add
> #define TPM_STRONG_PERSISTENCE
> which will make the tpm_emulator send a TPM_SaveState command after
> every tpm command it executes. This is needed because some commands like
> TPM_TakeOwnership do not send the TPM_SaveState command on their own.
> The tpm_emulator will only request the manager to save its state when
> this TPM command is sent.
>
> So in short without this patch, if you took ownership of your vtpm and
> then rebooted the domU, the the change in state would not be saved and
> your vtpm would come back unowned again.
>
> I imagine several other tpm commands would have this problem as well.
>
> ==============================
> vtpm-0.5.1.patch
> ==============================
> This patch will port vtpm to use tpm_emulator-0.5.1
> The newer version of the emulator contains several bug fixes, one that
> we were seeing in our use of vtpm.
>
> This patch also defines TPM_STRONG_PERSISTENCE for the new emulator.
>
> A couple of important notes about this patch:
> -This has only been tested on PVM domU's. In theory it should work for
> HVM but I have not tried it at all and can guarantee nothing.
> -All the relevant changes in tools/vtpm/vtpm.patch have been ported to
> tpm_emulator-0.5.1.
> -None of the changes in tpm_emulator.patch have been ported. In
> particular this means the BUILD_EMULATOR option, which as I understand
> lets you use the tpm_emulator in dom0 for a machine that does
> not have a real hardware TPM does not work. This functionality should be
> easy to add though because the new emulator already comes with a kernel
> module interface.
> -No considerations were made for the VTPM_MULTI_VM feature (which is
> supposedly unfinished). This patch may or may not break any progress
> made on that feature.
>
> ============================
> vtpm_manager and xen hotplug workarounds
> ============================
> Here are some issues I've run into when trying to use vtpm. Note that in
> my test cases we were only using vtpms in PVM domains.
>
> It might make sense to add these to a readme or something somewhere
> until the hotplug issues are fixed.
>
> 1-Q) When I boot my domU with a vtpm for the first time I get
> the following error message in the vtpm_managerd output
> Loading NVM.
> Sending LoadNVM command
> ERROR[VTPM]: Failed to load NVM
> .INFO[VTPM]: [VTPM Listener]: VTPM Listener waiting for messages.
> Reading LoadNVM header
> 1-A) This is ok. This message comes up when the vtpm non-volatile memory
> file does not exist, which is normal when xen creates a new vtpm
> instance.
>
> 2-Q) When I start vtpm_managerd it starts spamming output to the console
> forever and gives the following error:
> ERROR[VTPM]: [Hotplug Listener]: Hotplug Listener can't read from ipc.
> Errono = 0. Aborting...
> 2-A) Sometimes the hotplug scripts and the fifos they use to
> communicate
> get in a corrupted state. We need to clear all the fifos.
> 1) First, stop all of the vms that have vtpms.
> 2) Kill the vtpm_managerd
> 3) Search for vtpm processes.
> #ps -ef | grep vtpm
> You may see processes that look like the following. If you do
> not see any then skip ahead to the next step.
> /bin/bash /etc/xen/scripts/vtpm add
> dd skip=10 bs=1 count=4 if=/var/vtpm/fifos/to_console.fifo
> /usr/bin/vtpmd
> First, kill any of the dd processes, and then run ps again. Most if
> not all of the /etx/xen/scripts/vtpm processes should have quit.
> Kill any of the remaining scripts/vtpm and vtpmd processes.
> Note that after killing some of of the "vtpm add" processes
> new "vtpm remove" processes may get spawned which you will
> also need to kill.
> 4) Delete all of the fifos and socks
> #rm /var/vtpm/fifos/*
> #rm /var/vtpm/socks/*
> 5) Remove the lock files if they exist
> # rm -rf /var/run/xen-hotplug/vtpm*
> 6) Now start up the vtpm_managerd again, it should start without errors.
> 7) Finally, you should be able to boot up the vms again without any
> problems.
>
> 3-Q) When I start a domU that has a vtpm it hangs in the
> pause state and will not boot. If I wait long enough it will quit and
> tell me that the Hotplug scripts are not working.
> 3-A) This occurs when we have stale lock files that did not get removed
> properly.
> Perform the same set of steps in 2-A.
>
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
|
|
| |
|
Home