On Wed, Aug 19, 2009 at 06:35:40AM -0700, Boris Derzhavets wrote:
> Attempt to create HVM via virt-manager aborts with message:-
>
> Unable to complete install '<class 'libvirt.libvirtError'> Domain not found:
> xenUnifiedDomainLookupByName
> Traceback (most recent call last):
> File "/usr/share/virt-manager/virtManager/create.py", line 1501, in
> do_install
> dom = guest.start_install(False, meter = meter)
> File "/usr/lib/python2.6/site-packages/virtinst/Guest.py", line 541, in
> start_install
> return self._do_install(consolecb, meter, removeOld, wait)
> File "/usr/lib/python2.6/site-packages/virtinst/Guest.py", line 633, in
> _do_install
> self.domain = self.conn.createLinux(install_xml, 0)
> File "/usr/lib64/python2.6/site-packages/libvirt.py", line 974, in
> createLinux
> if ret is None:raise libvirtError('virDomainCreateLinux() failed',
> conn=self)
> libvirtError: Domain not found: xenUnifiedDomainLookupByName
>
This is getting offtopic for xen-devel .. these are issues with
libvirt/virt-tools/fedora and should be discussed on their mailinglists..
Please open a thread about that HVM problem on fedora-xen (and CC fedora-virt).
-- Pasi
> Boris
>
> --- On Wed, 8/19/09, Boris Derzhavets <bderzhavets@xxxxxxxxx> wrote:
>
> From: Boris Derzhavets <bderzhavets@xxxxxxxxx>
> Subject: Re: [Xen-devel] pvops dom0 work roadmap / Fedora 11 libvirt problems
> with Xen 3.4
> To: "Pasi Kärkkäinen" <pasik@xxxxxx>
> Cc: "Xen-devel" <xen-devel@xxxxxxxxxxxxxxxxxxx>
> Date: Wednesday, August 19, 2009, 9:26 AM
>
> Yes, Pasi
>
> I've loaded F11 DomU manually and changed timeout=5 then shutdown DomU and
> started smoothly via virt-manager.
>
> Thanks again.
> Boris.
>
> --- On Wed, 8/19/09, Pasi Kärkkäinen <pasik@xxxxxx> wrote:
>
> From: Pasi Kärkkäinen <pasik@xxxxxx>
> Subject: Re: [Xen-devel] pvops dom0 work roadmap / Fedora 11 libvirt problems
> with Xen 3.4
> To: "Boris Derzhavets" <bderzhavets@xxxxxxxxx>
> Cc: "Xen-devel" <xen-devel@xxxxxxxxxxxxxxxxxxx>
> Date: Wednesday, August 19, 2009, 8:37 AM
>
> On Wed, Aug 19, 2009 at 05:21:55AM -0700, Boris Derzhavets wrote:
> > Pasi,
> >
> > Thanks a lot a lot for your support.
> >
> > I was able to
> reproduce you instructions on F11 (64-bit) instance (C2D E8400,8 GB RAM).
> > I remind pretty clear, that now i am experiencing the same issue as with
> > xen-3.4.0-2.fc12.src.rpm.
> > F11 PVM been created via virt-manager, cannot be , actually, managed either
> > via virt-manager or from command line.
> >
> > # xm start VMF11
> >
> > moves it to paused state and resuming shows :-
> >
> > [root@ServerXen341F boris]# xm list
> > Name ID Mem VCPUs State
> > Time(s)
> >
> Domain-0 0 6034 2 r-----
> 574.9
> > VMF11 3 2048 0
> > ------ 0.0
> >
>
> What do you have in "xm log" ? Is the last line about running pygrub?
>
> I'm seeing an issue with F11 domU where the domU grub.conf contains
> timeout=0 and that causes pygrub to get stuck and thus prevents the domU
> from starting.. changing to timeout=5 fixes the
> problem.
>
> I'm going to debug pygrub later today.. I believe it's a bug in pygrub.
>
> > Attempt to create HVM crashes immediately.
> >
>
> I can't test HVM guests on my testbox, it doesn't have VT support in the CPU.
>
> -- Pasi
>
> > Boris.
> >
> > P.S. I was unable to find glibc-devel.i386 for 64-bit F11 (vs F10)
> > and installed glibc-devel.i586 for rpmbuild.
> >
> > --- On Wed, 8/19/09, Pasi Kärkkäinen <pasik@xxxxxx> wrote:
> >
> > From: Pasi Kärkkäinen <pasik@xxxxxx>
> > Subject: Re: [Xen-devel] pvops dom0 work roadmap / Fedora 11 libvirt
> > problems with Xen 3.4
> > To: "Boris Derzhavets" <bderzhavets@xxxxxxxxx>
> > Cc:
> "Xen-devel" <xen-devel@xxxxxxxxxxxxxxxxxxx>
> > Date: Wednesday, August 19, 2009, 6:27 AM
> >
> > On Wed, Aug 19, 2009 at 02:54:36AM -0700, Boris Derzhavets wrote:
> > > Pasi,
> > >
> > > I was able to install 3.4.1 Hypervisor via xen-3.4.1.src.rpm with no
> > > problems.
> > > Rebooted into Xen Host with 2.6.30.3 xenified aka Suse kernel. Fine.
> > >
> > > Downloaded from http://markmc.fedorapeople.org/virt-preview/f11/x86_64/
> > > and installed (pretty recent - 08/10/2009) :-
> > >
> > > yum install libvirt-0.7.0-3.fc11.x86_64.rpm \
> > > libvirt-client-0.7.0-3.fc11.x86_64.rpm \
> > > libvirt-devel-0.7.0-3.fc11.x86_64.rpm \
> >
> > libvirt-python-0.7.0-3.fc11.x86_64.rpm \
> > > python-virtinst-0.500.0-1.fc11.noarch.rpm \
> > > virt-manager-0.8.0-1.fc11.noarch.rpm \
> > > virt-viewer-0.2.0-1.fc11.x86_64.rpm
> > >
> > > [root@ServerXen341F Download]# rpm -qa|grep virt
> > > libvirt-0.7.0-3.fc11.x86_64
> > > libvirt-devel-0.7.0-3.fc11.x86_64
> > > python-virtinst-0.500.0-1.fc11.noarch
> > > virt-manager-0.8.0-1.fc11.noarch
> > > virt-viewer-0.2.0-1.fc11.x86_64
> > > libvirt-python-0.7.0-3.fc11.x86_64
> > > libvirt-client-0.7.0-3.fc11.x86_64
> > >
> > > Then i was able to connect to xend via virt-manager and attempted to
> > > start building
> > > OSOL HVM. Got an error at startup:-
> > >
> > > Unable to complete install '<class 'libvirt.libvirtError'> Domain not
> > > found: xenUnifiedDomainLookupByName
> > > Traceback (most recent call last):
> > >
> File "/usr/share/virt-manager/virtManager/create.py", line 1489, in
> do_install
> > > dom = guest.start_install(False, meter = meter)
> > > File "/usr/lib/python2.6/site-packages/virtinst/Guest.py", line 628, in
> > > start_install
> > > return self._do_install(consolecb, meter, removeOld, wait)
> > > File "/usr/lib/python2.6/site-packages/virtinst/Guest.py", line 726, in
> > > _do_install
> > > self.domain = self.conn.createLinux(install_xml, 0)
> > > File "/usr/lib64/python2.6/site-packages/libvirt.py", line 1077, in
> > > createLinux
> > > if ret is None:raise libvirtError('virDomainCreateLinux() failed',
> > > conn=self)
> > > libvirtError: Domain not found: xenUnifiedDomainLookupByName
> > >
> > > Please advise , how to escalate it to Fedora's people ?
> > >
> >
> > I think you should
> post to fedora-xen@xxxxxxxxxx and possibly
> > CC fedora-virt@xxxxxxxxxxx
> >
> > > Boris.
> > > P.S. Usually i installed libvirt stuff :-
> > >
> > > # yum install libvirt libvirt-python python-virtinst \
> > >
> > > virt-manager virt-viewer
> > >
> > > To apply patch manually i need a kind of libvirt.src.rpm.
> > > I don't track Fedora so close to be aware of this.
> > > '
> >
> >
> > I was using the default libvirt from F11, but I manually added the bugfix
> > patch:
> >
> > - Download libvirt src.rpm:
> >
> > ftp://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/updates/11/SRPMS/libvirt-0.6.2-14.fc11.src.rpm
> >
> > - install it: "rpm -i libvirt-0.6.2-14.fc11.src.rpm"
> >
> > - Copy & paste the patch to a file
> > /root/rpmbuild/SOURCES/libvirt-bugfix-custom.patch from
> >
> > http://libvirt.org/git/?p=libvirt.git;a=blobdiff;f=src/xend_internal.c;h=55ffd3f9a5004e681c8ffb2279d27965eb42e956;hp=b211bb6293355bf68e33f56f947021bd7bb8e675;hb=14435163a086c0bcdff04308077fa46a5fa08bb0;hpb=fd90b67afe59265327dde7e447ea847687bd4e8d
> >
> > - Edit /root/rpmbuild/SPECS/libvirt.spec and add the patch like other
> > patches are
> added. You need to add one line to two different places.
> >
> > - Run "rpmbuild -bb libvirt.spec"
> >
> > - Install the bugfixed rpms from /root/rpmbuild/RPMS/i586/
> >
> > -- Pasi
> >
> >
> > >
> > > --- On Wed, 8/19/09, Pasi Kärkkäinen <pasik@xxxxxx> wrote:
> > >
> > > From: Pasi Kärkkäinen <pasik@xxxxxx>
> > > Subject: Re: [Xen-devel] pvops dom0 work roadmap / Fedora 11 libvirt
> > > problems with Xen 3.4
> > > To: "Boris Derzhavets" <bderzhavets@xxxxxxxxx>
> > > Cc: "Xen-devel" <xen-devel@xxxxxxxxxxxxxxxxxxx>
> > > Date: Wednesday, August 19, 2009, 3:09 AM
> > >
> > > On Tue, Aug 18, 2009 at 09:16:08PM -0700, Boris Derzhavets wrote:
> > > > >There was a bug in libvirt of F11 dom0 causing virt-viewer to crash
> > > > >when
> > > > > using Xen 3.4, but after I got that patched it was all fine
> > > >
> > > > If it's possible to share your experience , i wonder does it mean,
> > > > that you've got xen-3.4.0-2.fc12.src.rpm working on F11 (32-bit) ?
> > > > I was unable to connect to xend when starting virt-manager after
> > > > xen-3.4.0-2.fc12.src.rpm install ( along with generated packages) on
> > > > 64-bit F11 instance.
> > > >
> > >
> > > I grabbed Xen 3.4.1-1 src.rpm from:
> > > http://kojipkgs.fedoraproject.org/packages/xen/3.4.1/1.fc12/
> > >
> > > and rebuilt that for F11.
> > >
> > > The next problem was that libvirt package in Fedora 11 has a bug, which
> > > causes it
> > > to crash (segfault) when virt-viewer is started. This crash only happens
> > > with Xen 3.4, not with Xen 3.3.
> > >
> > > Patch for the libvirt bug is here:
> > > http://libvirt.org/git/?p=libvirt.git;a=commit;h=14435163a086c0bcdff04308077fa46a5fa08bb0
> > >
> > > Upcoming libvirt update for F11 will fix this. After manually applying
> > > that
> > > patch and rebuilding libvirt I'm now able to successfully install new
> > > guests
> > > using virt-install and connect to their console by virt-viewer.
> > >
> > > -- Pasi
> > >
>
> > > _______________________________________________
> > > Xen-devel mailing list
> > > Xen-devel@xxxxxxxxxxxxxxxxxxx
> > > http://lists.xensource.com/xen-devel
> > >
> > >
> > >
> > >
> >
> > _______________________________________________
> > Xen-devel mailing list
> > Xen-devel@xxxxxxxxxxxxxxxxxxx
> > http://lists.xensource.com/xen-devel
> >
> >
> >
> >
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel
>
>
>
>
>
>
> -----Inline Attachment Follows-----
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home