xen-devel
RE: [Xen-devel] Vt-d not working with 3.4.1
Dear Ralf,
I am also working on VT-d on Intel Desktop Board DQ45CB. We could share our
findings with each other.
Regards,
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile: +65-9648-9798
MSN: teoenming@xxxxxxxxxxx
-----Original Message-----
From: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
[mailto:xen-devel-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Bonenkamp, Ralf
Sent: Monday, August 17, 2009 10:46 PM
To: xen-devel@xxxxxxxxxxxxxxxxxxx
Subject: RE: [Xen-devel] Vt-d not working with 3.4.1
Hi Pasi,
Sorry - I forgot to mention that I've tried setting the
iommu_inclusive_mapping=1 parameter too, but unfortunate I posted the output
from a previous attempt without this parameter.
The xm dmesg output and the DMAR parsing error remains the same. This was
the reason posting, because I ran out of ideas...
Best regards
Ralf Bonenkamp
-----Original Message-----
From: Pasi Kärkkäinen [mailto:pasik@xxxxxx]
Sent: Montag, 17. August 2009 16:32
To: Bonenkamp, Ralf
Cc: xen-devel@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Xen-devel] Vt-d not working with 3.4.1
On Sat, Aug 08, 2009 at 11:53:23PM +0200, Bonenkamp, Ralf wrote:
> Hi folks,
>
> currently I try to setup a new xen host v3.4.1 on top of a Asus P5E-VM
> DO (latest BIOS, Vt-d capable and enabled in BIOS) to migrate my
> extisting HVMs (Win2k3 server) running on Xen v3.3.0 to a new home. I
> want to switch over to 3.4.1 to (hopefully!) passthrough my ISDN board
> to a HVM domU.
> Unfortunate there seem some issue with the VT-d DMAR tables which is
> beyond my knowledge and probably someone has some hint how to proceed?
> :-)
>
Well did you try iommu_inclusive_mapping=1, like it suggests ?
> (XEN) [VT-D]dmar.c:401: RMRR address range not in reserved memory base =
> 7d600000 end = 7dffffff; iommu_inclusive_mapping=1 parameter may be
> needed.
> (XEN) Intel VT-d DMAR tables have been parsed.
-- Pasi
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
Internal Virus Database is out of date.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.49/2295 - Release Date: 08/10/09
18:19:00
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.49/2295 - Release Date: 08/18/09
18:05:00
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Xen-devel] Vt-d not working with 3.4.1, Bonenkamp, Ralf
- RE: [Xen-devel] Vt-d not working with 3.4.1, Teo En Ming (Zhang Enming)
- RE: [Xen-devel] Vt-d not working with 3.4.1, Bonenkamp, Ralf
- RE: [Xen-devel] Vt-d not working with 3.4.1, Han, Weidong
- RE: [Xen-devel] Vt-d not working with 3.4.1, Teo En Ming (Zhang Enming)
- Re: [Xen-devel] Vt-d not working with 3.4.1, Pasi Kärkkäinen
- RE: [Xen-devel] Vt-d not working with 3.4.1, Teo En Ming (Zhang Enming)
- Re: [Xen-devel] Vt-d not working with 3.4.1, Pasi Kärkkäinen
- Re: [Xen-devel] Vt-d not working with 3.4.1, Mr. Teo En Ming (Zhang Enming)
- Re: [Xen-devel] Vt-d not working with 3.4.1, Mr. Teo En Ming (Zhang Enming)
- Re: [Xen-devel] Vt-d not working with 3.4.1, Mr. Teo En Ming (Zhang Enming)
|
|
|