root (hd0,0) Filesystem type is ext2fs, partition type 0x83 kernel /boot/xen.gz console=com1 com1=115200,8n1 iommu=1 loglvl=all loglvl_gue st=all ro [Multiboot-elf, <0x100000:0x13b768:0x8e898>, shtab=0x2ca078, entry=0x100000] module /boot/vmlinuz-2.6.18.8-xenkci ro root=LABEL=/ console=ttyS0,115200,8n1 pciback.hide=(04:00.0)(04:00.1) pciback.verbose_request=1 [Multiboot-module @ 0x2cb000, 0x76f7d8 bytes] module /boot/initrd-2.6.18-xenkci.img [Multiboot-module @ 0xa3b000, 0x443600 bytes] __ __ _____ _ _ _ _ _ \ \/ /___ _ __ |___ /| || | _ _ _ __ ___| |_ __ _| |__ | | ___ \ // _ \ '_ \ |_ \| || |_ __| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ / \ __/ | | | ___) |__ _|__| |_| | | | \__ \ || (_| | |_) | | __/ /_/\_\___|_| |_| |____(_) |_| \__,_|_| |_|___/\__\__,_|_.__/|_|\___| (XEN) Xen version 3.4-unstable (root@localdomain) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-44)) Fri Apr 3 14:20:00 EDT 2009 (XEN) Latest ChangeSet: Mon Mar 30 16:48:26 2009 +0100 19433:d5ddc782bc49 (XEN) Command line: console=com1 com1=115200,8n1 iommu=1 loglvl=all loglvl_guest=all ro (XEN) Video information: (XEN) No VGA detected (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009a800 (usable) (XEN) 000000000009a800 - 00000000000a0000 (reserved) (XEN) 00000000000e4000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 000000007f7b0000 (usable) (XEN) 000000007f7b0000 - 000000007f7be000 (ACPI data) (XEN) 000000007f7be000 - 000000007f7d0000 (ACPI NVS) (XEN) 000000007f7d0000 - 000000007f7e0000 (reserved) (XEN) 000000007f7ed000 - 0000000080000000 (reserved) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000fee00000 - 00000000fee01000 (reserved) (XEN) 00000000ffb00000 - 0000000100000000 (reserved) (XEN) System RAM: 2039MB (2088232kB) (XEN) ACPI: RSDP 000FA6B0, 0024 (r2 ACPIAM) (XEN) ACPI: XSDT 7F7B0100, 005C (r1 031209 XSDT0910 20090312 MSFT 97) (XEN) ACPI: FACP 7F7B0290, 00F4 (r4 031209 FACP0910 20090312 MSFT 97) (XEN) ACPI: DSDT 7F7B04B0, 4FFD (r2 5007_ 5007_115 115 INTL 20051117) (XEN) ACPI: FACS 7F7BE000, 0040 (XEN) ACPI: APIC 7F7B0390, 008C (r2 031209 APIC0910 20090312 MSFT 97) (XEN) ACPI: MCFG 7F7B0470, 003C (r1 031209 OEMMCFG 20090312 MSFT 97) (XEN) ACPI: OEMB 7F7BE040, 0072 (r1 031209 OEMB0910 20090312 MSFT 97) (XEN) ACPI: HPET 7F7BA4B0, 0038 (r1 031209 OEMHPET 20090312 MSFT 97) (XEN) ACPI: DMAR 7F7BE0C0, 00F8 (r1 AMI OEMDMAR 1 MSFT 97) (XEN) ACPI: SSDT 7F7BFC10, 0363 (r1 DpgPmm CpuPm 12 INTL 20051117) (XEN) NUMA turned off (XEN) Faking a node at 0000000000000000-000000007f7b0000 (XEN) Domain heap initialised (XEN) found SMP MP-table at 000ff780 (XEN) DMI present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x808 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0] (XEN) ACPI: wakeup_vec[7f7be00c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) (XEN) Processor #0 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) (XEN) Processor #2 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) (XEN) Processor #4 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) (XEN) Processor #6 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) (XEN) Processor #1 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) (XEN) Processor #3 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) (XEN) Processor #5 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) (XEN) Processor #7 7:10 APIC version 21 (XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) ACPI: HPET id: 0xffffffff base: 0xfed00000 (XEN) [VT-D]dmar.c:485: Host address width 39 (XEN) [VT-D]dmar.c:494: found ACPI_DMAR_DRHD (XEN) [VT-D]dmar.c:349: dmaru->address = fbffe000 (XEN) [VT-D]dmar.c:306: found IOAPIC: bdf = f0:1f.7 (XEN) [VT-D]dmar.c:358: found INCLUDE_ALL (XEN) [VT-D]dmar.c:498: found ACPI_DMAR_RMRR (XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1d.0 (XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1d.1 (XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1d.2 (XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1d.7 (XEN) [VT-D]dmar.c:498: found ACPI_DMAR_RMRR (XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1d.0 (XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1d.1 (XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1d.2 (XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1d.7 (XEN) [VT-D]dmar.c:502: found ACPI_DMAR_ATSR (XEN) [VT-D]dmar.c:287: found bridge: bdf = 0:3.0 sec = 5 sub = 5 (XEN) [VT-D]dmar.c:287: found bridge: bdf = 0:4.0 sec = 6 sub = 6 (XEN) [VT-D]dmar.c:287: found bridge: bdf = 0:5.0 sec = 3 sub = 3 (XEN) [VT-D]dmar.c:287: found bridge: bdf = 0:7.0 sec = 8 sub = 8 (XEN) [VT-D]dmar.c:287: found bridge: bdf = 0:8.0 sec = 7 sub = 7 (XEN) [VT-D]dmar.c:287: found bridge: bdf = 0:9.0 sec = 4 sub = 4 (XEN) [VT-D]dmar.c:287: found bridge: bdf = 0:a.0 sec = 2 sub = 2 (XEN) Intel VT-d DMAR tables have been parsed. (XEN) Using ACPI (MADT) for SMP configuration information (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Initializing CPU#0 (XEN) Detected 2128.044 MHz processor. (XEN) , L1 D cache: 32K (XEN) CPU: Physical Processor ID: 0 (XEN) VMX: Supported advanced features: (XEN) - APIC MMIO access virtualisation (XEN) - APIC TPR shadow (XEN) - Extended Page Tables (EPT) (XEN) - Virtual-Processor Identifiers (VPID) (XEN) - Virtual NMI (XEN) - MSR direct-access bitmap (XEN) VMX: EPT is available. (XEN) VMX: VPID is available. (XEN) HVM: VMX enabled (XEN) HVM: Hardware Assisted Paging detected. (XEN) Intel machine check reporting enabled on CPU#0. (XEN) CPU0: Thermal monitoring enabled (TM1) (XEN) CMCI: find owner on CPU0 (XEN) CMCI: CPU0 owner_map[6c], no_cmci_map[93] (XEN) CPU0: Intel(R) Xeon(R) CPU L5518 @ 2.13GHz stepping 05 (XEN) Booting processor 1/2 eip 8c000 (XEN) Initializing CPU#1 (XEN) , L1 D cache: 32K (XEN) CPU: Physical Processor ID: 0 (XEN) Intel machine check reporting enabled on CPU#1. (XEN) CPU1: Thermal monitoring enabled (TM1) (XEN) CMCI: find owner on CPU1 (XEN) CMCI: CPU1 owner_map[2c], no_cmci_map[93] (XEN) CPU1: Intel(R) Xeon(R) CPU L5518 @ 2.13GHz stepping 05 (XEN) Booting processor 2/4 eip 8c000 (XEN) Initializing CPU#2 (XEN) , L1 D cache: 32K (XEN) CPU: Physical Processor ID: 0 (XEN) Intel machine check reporting enabled on CPU#2. (XEN) CPU2: Thermal monitoring enabled (TM1) (XEN) CMCI: find owner on CPU2 (XEN) CMCI: CPU2 owner_map[2c], no_cmci_map[93] (XEN) CPU2: Intel(R) Xeon(R) CPU L5518 @ 2.13GHz stepping 05 (XEN) Booting processor 3/6 eip 8c000 (XEN) Initializing CPU#3 (XEN) , L1 D cache: 32K (XEN) CPU: Physical Processor ID: 0 (XEN) Intel machine check reporting enabled on CPU#3. (XEN) CPU3: Thermal monitoring enabled (TM1) (XEN) CMCI: find owner on CPU3 (XEN) CMCI: CPU3 owner_map[2c], no_cmci_map[93] (XEN) CPU3: Intel(R) Xeon(R) CPU L5518 @ 2.13GHz stepping 05 (XEN) Booting processor 4/1 eip 8c000 (XEN) Initializing CPU#4 (XEN) , L1 D cache: 32K (XEN) CPU: Physical Processor ID: 0 (XEN) Intel machine check reporting enabled on CPU#4. (XEN) CPU4: Thermal monitoring enabled (TM1) (XEN) CMCI: find owner on CPU4 (XEN) CMCI: CPU4 owner_map[0], no_cmci_map[93] (XEN) CPU4: Intel(R) Xeon(R) CPU L5518 @ 2.13GHz stepping 05 (XEN) Booting processor 5/3 eip 8c000 (XEN) Initializing CPU#5 (XEN) , L1 D cache: 32K (XEN) CPU: Physical Processor ID: 0 (XEN) Intel machine check reporting enabled on CPU#5. (XEN) CPU5: Thermal monitoring enabled (TM1) (XEN) CMCI: find owner on CPU5 (XEN) CMCI: CPU5 owner_map[0], no_cmci_map[93] (XEN) CPU5: Intel(R) Xeon(R) CPU L5518 @ 2.13GHz stepping 05 (XEN) Booting processor 6/5 eip 8c000 (XEN) Initializing CPU#6 (XEN) , L1 D cache: 32K (XEN) CPU: Physical Processor ID: 0 (XEN) Intel machine check reporting enabled on CPU#6. (XEN) CPU6: Thermal monitoring enabled (TM1) (XEN) CMCI: find owner on CPU6 (XEN) CMCI: CPU6 owner_map[0], no_cmci_map[93] (XEN) CPU6: Intel(R) Xeon(R) CPU L5518 @ 2.13GHz stepping 05 (XEN) Booting processor 7/7 eip 8c000 (XEN) Initializing CPU#7 (XEN) , L1 D cache: 32K (XEN) CPU: Physical Processor ID: 0 (XEN) Intel machine check reporting enabled on CPU#7. (XEN) CPU7: Thermal monitoring enabled (TM1) (XEN) CMCI: find owner on CPU7 (XEN) CMCI: CPU7 owner_map[0], no_cmci_map[93] (XEN) CPU7: Intel(R) Xeon(R) CPU L5518 @ 2.13GHz stepping 05 (XEN) Total of 8 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) checking TSC synchronization across 8 CPUs: passed. (XEN) Platform timer is 14.318MHz HPET (XEN) microcode.c:73:d32767 microcode: CPU1 resumed (XEN) microcode.c:73:d32767 microcode: CPU4 resumed (XEN) microcode.c:73:d32767 microcode: CPU2 resumed (XEN) microcode.c:73:d32767 microcode: CPU7 resumed (XEN) microcode.c:73:d32767 microcode: CPU5 resumed (XEN) microcode.c:73:d32767 microcode: CPU3 resumed (XEN) Brought up 8 CPUs (XEN) microcode.c:73:d32767 microcode: CPU6 resumed (XEN) Intel VT-d Snoop Control supported. (XEN) Intel VT-d DMA Passthrough not supported. (XEN) Intel VT-d Queued Invalidation supported. (XEN) Intel VT-d Interrupt Remapping supported. (XEN) DMAR_IQA_REG = 7f79d000 (XEN) DMAR_IQH_REG = 0 (XEN) DMAR_IQT_REG = 20 (XEN) (XEN) **************************************** (XEN) Panic on CPU 0: (XEN) queue invalidate wait descriptor was not executed (XEN) **************************************** (XEN) (XEN) Reboot in five seconds...