[ 0.000000] Linux version 2.6.27.5 (geeko@buildhost) (gcc version 4.3.2 (Debian 4.3.2-1) ) #2 SMP Wed Dec 24 08:59:15 JST 2008 [ 0.000000] Command line: root=/dev/mapper/sam-root_x86_64 console=ttyS0 loglevel=8 ro pciback.hide=(00:1d.0)(00:1d.1)(00:1d.2)(00:1d.7)(00:1b.0) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] Xen-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 00000000ef904000 (usable) [ 0.000000] last_pfn = 0xef904 max_arch_pfn = 0xdffffff [ 0.000000] init_memory_mapping [ 0.000000] 0000000000 - 00ef904000 page 4k [ 0.000000] kernel direct mapping tables up to ef904000 @ 15c2000-1d44000 [ 0.000000] last_map_addr: ef904000 end: ef904000 [ 0.000000] RAMDISK: 006b4000 - 00e35800 [ 0.000000] DMI 2.5 present. [ 0.000000] ACPI: RSDP 000E5C10, 0014 (r0 COMPAQ) [ 0.000000] ACPI: RSDT DEFC1E40, 0044 (r1 HPQOEM SLIC-BPC 20080318 0) [ 0.000000] ACPI: FACP DEFC1EE8, 0074 (r1 COMPAQ BEARLAKE 1 0) [ 0.000000] ACPI: DSDT DEFC2427, A370 (r1 COMPAQ DSDT_PRJ 1 MSFT 100000E) [ 0.000000] ACPI: FACS DEFC1E00, 0040 [ 0.000000] ACPI: APIC DEFC1F5C, 0084 (r1 COMPAQ BEARLAKE 1 0) [ 0.000000] ACPI: ASF! DEFC1FE0, 0063 (r32 COMPAQ BEARLAKE 1 0) [ 0.000000] ACPI: MCFG DEFC2043, 003C (r1 COMPAQ BEARLAKE 1 0) [ 0.000000] ACPI: TCPA DEFC207F, 0032 (r1 COMPAQ BEARLAKE 1 0) [ 0.000000] ACPI: SLIC DEFC20B1, 0176 (r1 HPQOEM SLIC-BPC 1 0) [ 0.000000] ACPI: HPET DEFC2227, 0038 (r1 COMPAQ BEARLAKE 1 0) [ 0.000000] ACPI: DEFC225F, 0198 (r1 COMPAQ BEARLAKE 1 0) [ 0.000000] ACPI: DMI detected: Hewlett-Packard [ 0.000000] (4 early reservations) ==> bootmem [0000000000 - 00ef104000] [ 0.000000] #0 [0000200000 - 00006b3878] TEXT DATA BSS ==> [0000200000 - 00006b3878] [ 0.000000] #1 [00006b4000 - 00015bf000] Xen provided ==> [00006b4000 - 00015bf000] [ 0.000000] #2 [00015bf000 - 00015c2000] INITMAP ==> [00015bf000 - 00015c2000] [ 0.000000] #3 [00015c2000 - 0001d45000] PGTABLE ==> [00015c2000 - 0001d45000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x000ef904 [ 0.000000] On node 0 totalpages: 981252 [ 0.000000] free_area_init_node: node 0, pgdat ffffffff8058f200, node_mem_map ffff880001d45000 [ 0.000000] DMA zone: 4040 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 963796 pages, LIFO batch:31 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Allocating PCI resources starting at e2000000 (gap: e0000000:14000000) [ 0.000000] PERCPU: Allocating 41248 bytes of per cpu data [ 0.000000] NR_CPUS: 16, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 967836 [ 0.000000] Kernel command line: root=/dev/mapper/sam-root_x86_64 console=ttyS0 loglevel=8 ro pciback.hide=(00:1d.0)(00:1d.1)(00:1d.2)(00:1d.7)(00:1b.0) [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Xen reported: 2826.304 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [xvc-1] enabled [ 0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.004000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.004000] Software IO TLB enabled: [ 0.004000] Aperture: 64 megabytes [ 0.004000] Kernel range: ffff880005b50000 - ffff880009b50000 [ 0.004000] Address size: 27 bits [ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.004000] Memory: 3762216k/3925008k available (2501k kernel code, 154260k reserved, 1167k data, 220k init) [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.700028] Calibrating delay using timer specific routine.. 5698.15 BogoMIPS (lpj=11396313) [ 0.700068] Mount-cache hash table entries: 256 [ 0.700193] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.700196] CPU: L2 cache: 6144K [ 0.700200] CPU: Physical Processor ID: 0 [ 0.700201] CPU: Processor Core ID: 0 [ 0.700208] SMP alternatives: switching to UP code [ 0.706678] ACPI: Core revision 20080609 [ 0.720212] SMP alternatives: switching to SMP code [ 0.726617] Brought up 2 CPUs [ 0.726616] Initializing CPU#1 [ 0.726624] CPU0 attaching sched-domain: [ 0.726626] domain 0: span 0-1 level CPU [ 0.726627] groups: 0 1 [ 0.726630] CPU1 attaching sched-domain: [ 0.726631] domain 0: span 0-1 level CPU [ 0.726634] groups: 1 0 [ 0.726616] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.726616] CPU: L2 cache: 6144K [ 0.726616] CPU: Physical Processor ID: 0 [ 0.726616] CPU: Processor Core ID: 1 [ 0.732512] net_namespace: 1312 bytes [ 0.732677] NET: Registered protocol family 16 [ 0.732942] ACPI: bus type pci registered [ 0.732952] PCI: Using configuration type 1 for base access [ 0.734302] ACPI: EC: Look up EC in DSDT [ 0.744238] ACPI: Interpreter enabled [ 0.744241] ACPI: (supports S0 S5) [ 0.744246] ACPI: Using IOAPIC for interrupt routing [ 0.748575] ACPI: No dock devices found. [ 0.748585] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.748723] PCI: 0000:00:02.0 reg 10 32bit mmio: [f0100000, f017ffff] [ 0.748730] PCI: 0000:00:02.0 reg 14 io port: [1230, 1237] [ 0.748737] PCI: 0000:00:02.0 reg 18 32bit mmio: [e0000000, efffffff] [ 0.748744] PCI: 0000:00:02.0 reg 1c 32bit mmio: [f0000000, f00fffff] [ 0.748816] PCI: 0000:00:03.0 reg 10 64bit mmio: [f01a6900, f01a690f] [ 0.748859] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.748864] pci 0000:00:03.0: PME# disabled [ 0.748902] PCI: 0000:00:03.2 reg 10 io port: [1238, 123f] [ 0.748909] PCI: 0000:00:03.2 reg 14 io port: [1270, 1273] [ 0.748916] PCI: 0000:00:03.2 reg 18 io port: [1240, 1247] [ 0.748923] PCI: 0000:00:03.2 reg 1c io port: [1274, 1277] [ 0.748930] PCI: 0000:00:03.2 reg 20 io port: [11e0, 11ef] [ 0.748993] PCI: 0000:00:03.3 reg 10 io port: [1248, 124f] [ 0.749000] PCI: 0000:00:03.3 reg 14 32bit mmio: [f01a4000, f01a4fff] [ 0.749139] PCI: 0000:00:19.0 reg 10 32bit mmio: [f0180000, f019ffff] [ 0.749147] PCI: 0000:00:19.0 reg 14 32bit mmio: [f01a5000, f01a5fff] [ 0.749156] PCI: 0000:00:19.0 reg 18 io port: [1100, 111f] [ 0.749205] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.749210] pci 0000:00:19.0: PME# disabled [ 0.749273] PCI: 0000:00:1a.0 reg 20 io port: [1120, 113f] [ 0.749366] PCI: 0000:00:1a.1 reg 20 io port: [1140, 115f] [ 0.749396] PCI: 0000:00:1a.7 reg 10 32bit mmio: [f01a6000, f01a63ff] [ 0.749396] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.749396] pci 0000:00:1a.7: PME# disabled [ 0.749396] PCI: 0000:00:1b.0 reg 10 64bit mmio: [f01a0000, f01a3fff] [ 0.749396] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.749396] pci 0000:00:1b.0: PME# disabled [ 0.749396] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.749396] pci 0000:00:1c.0: PME# disabled [ 0.749396] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.752021] pci 0000:00:1c.1: PME# disabled [ 0.756087] PCI: 0000:00:1d.0 reg 20 io port: [1160, 117f] [ 0.760107] PCI: 0000:00:1d.1 reg 20 io port: [1180, 119f] [ 0.764106] PCI: 0000:00:1d.2 reg 20 io port: [11a0, 11bf] [ 0.768108] PCI: 0000:00:1d.7 reg 10 32bit mmio: [f01a6400, f01a67ff] [ 0.772080] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.776016] pci 0000:00:1d.7: PME# disabled [ 0.780168] pci 0000:00:1f.0: quirk: region f800-f87f claimed by ICH6 ACPI/GPIO/TCO [ 0.784013] pci 0000:00:1f.0: quirk: region fa00-fa3f claimed by ICH6 GPIO [ 0.788062] PCI: 0000:00:1f.2 reg 10 io port: [1250, 1257] [ 0.792016] PCI: 0000:00:1f.2 reg 14 io port: [1278, 127b] [ 0.796015] PCI: 0000:00:1f.2 reg 18 io port: [1258, 125f] [ 0.804014] PCI: 0000:00:1f.2 reg 1c io port: [127c, 127f] [ 0.808014] PCI: 0000:00:1f.2 reg 20 io port: [11f0, 11ff] [ 0.812013] PCI: 0000:00:1f.2 reg 24 io port: [1200, 120f] [ 0.816078] PCI: 0000:00:1f.5 reg 10 io port: [1260, 1267] [ 0.820012] PCI: 0000:00:1f.5 reg 14 io port: [1280, 1283] [ 0.824012] PCI: 0000:00:1f.5 reg 18 io port: [1268, 126f] [ 0.828012] PCI: 0000:00:1f.5 reg 1c io port: [1284, 1287] [ 0.832011] PCI: 0000:00:1f.5 reg 20 io port: [1210, 121f] [ 0.835025] PCI: 0000:00:1f.5 reg 24 io port: [1220, 122f] [ 0.836231] pci 0000:00:1e.0: transparent bridge [ 0.840037] bus 00 -> node 0 [ 0.844008] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.848238] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT] [ 0.852090] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX2._PRT] [ 0.856092] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] [ 0.881319] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.881406] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 14 15) [ 0.881492] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15) [ 0.881586] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.885005] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.890093] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 14 15) [ 0.894093] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 14 15) [ 0.900081] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.905242] ACPI Warning (tbutils-0217): Incorrect checksum in table [ ] - 6C, should be B0 [20080609] [ 0.912004] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.912033] pnp: PnP ACPI init [ 0.916006] ACPI: bus type pnp registered [ 0.921291] pnp 00:0e: io resource (0xf800-0xf81f) overlaps 0000:00:1f.0 BAR 7 (0xf800-0xf87f), disabling [ 0.921295] pnp 00:0e: io resource (0xf820-0xf83f) overlaps 0000:00:1f.0 BAR 7 (0xf800-0xf87f), disabling [ 0.928002] pnp 00:0e: io resource (0xf840-0xf85f) overlaps 0000:00:1f.0 BAR 7 (0xf800-0xf87f), disabling [ 0.936001] pnp 00:0e: io resource (0xf860-0xf87f) overlaps 0000:00:1f.0 BAR 7 (0xf800-0xf87f), disabling [ 0.944595] pnp: PnP ACPI: found 17 devices [ 0.948002] ACPI: ACPI bus type pnp unregistered [ 0.952091] xen_mem: Initialising balloon driver. [ 0.955282] SCSI subsystem initialized [ 0.960045] libata version 3.00 loaded. [ 0.962012] PCI: Using ACPI for IRQ routing [ 1.004021] system 00:0e: ioport range 0x400-0x41f has been reserved [ 1.004025] system 00:0e: ioport range 0x420-0x43f has been reserved [ 1.004028] system 00:0e: ioport range 0x440-0x45f has been reserved [ 1.004032] system 00:0e: ioport range 0x460-0x47f has been reserved [ 1.004035] system 00:0e: ioport range 0x480-0x48f has been reserved [ 1.004039] system 00:0e: ioport range 0xfa00-0xfa3f has been reserved [ 1.004042] system 00:0e: ioport range 0xfc00-0xfc7f has been reserved [ 1.004045] system 00:0e: ioport range 0xfc80-0xfcff has been reserved [ 1.004049] system 00:0e: ioport range 0xfe00-0xfe7f has been reserved [ 1.004503] system 00:0e: ioport range 0xfe80-0xfeff has been reserved [ 1.009543] system 00:0f: ioport range 0x4d0-0x4d1 has been reserved [ 1.013572] system 00:10: iomem range 0x0-0x9ffff could not be reserved [ 1.018606] system 00:10: iomem range 0x100000-0xdfffffff could not be reserved [ 1.023639] system 00:10: iomem range 0xe4000-0xfffff could not be reserved [ 1.028674] system 00:10: iomem range 0xfec01000-0xfecfffff could not be reserved [ 1.034709] system 00:10: iomem range 0xfed00400-0xfed3ffff could not be reserved [ 1.039743] system 00:10: iomem range 0xfed45000-0xffffffff could not be reserved [ 1.045785] system 00:10: iomem range 0xf4000000-0xf7ffffff could not be reserved [ 1.050819] system 00:10: iomem range 0xcd400-0xe3fff has been reserved [ 1.056113] : pciback: wants to seize 0000:00:1d.0 [ 1.060889] : pciback: wants to seize 0000:00:1d.1 [ 1.064919] : pciback: wants to seize 0000:00:1d.2 [ 1.067935] : pciback: wants to seize 0000:00:1d.7 [ 1.070958] : pciback: wants to seize 0000:00:1b.0 [ 1.074994] pciback 0000:00:00.0: probing... [ 1.080065] pciback 0000:00:02.0: probing... [ 1.091134] pciback 0000:00:03.0: probing... [ 1.098189] pciback 0000:00:03.2: probing... [ 1.110273] pciback 0000:00:03.3: probing... [ 1.121349] pciback 0000:00:19.0: probing... [ 1.132436] pciback 0000:00:1a.0: probing... [ 1.143503] pciback 0000:00:1a.1: probing... [ 1.150554] pciback 0000:00:1a.7: probing... [ 1.157609] pciback 0000:00:1b.0: probing... [ 1.164639] pciback 0000:00:1b.0: seizing device [ 1.167657] pciback 0000:00:1b.0: pcistub_device_alloc [ 1.171687] pciback 0000:00:1b.0: deferring initialization [ 1.174712] pciback 0000:00:1c.0: probing... [ 1.180772] pciback 0000:00:1c.1: probing... [ 1.187820] pciback 0000:00:1d.0: probing... [ 1.194849] pciback 0000:00:1d.0: seizing device [ 1.197869] pciback 0000:00:1d.0: pcistub_device_alloc [ 1.200890] pciback 0000:00:1d.0: deferring initialization [ 1.204922] pciback 0000:00:1d.1: probing... [ 1.210961] pciback 0000:00:1d.1: seizing device [ 1.213981] pciback 0000:00:1d.1: pcistub_device_alloc [ 1.217002] pciback 0000:00:1d.1: deferring initialization [ 1.221034] pciback 0000:00:1d.2: probing... [ 1.227072] pciback 0000:00:1d.2: seizing device [ 1.230094] pciback 0000:00:1d.2: pcistub_device_alloc [ 1.233115] pciback 0000:00:1d.2: deferring initialization [ 1.237149] pciback 0000:00:1d.7: probing... [ 1.243188] pciback 0000:00:1d.7: seizing device [ 1.246208] pciback 0000:00:1d.7: pcistub_device_alloc [ 1.249230] pciback 0000:00:1d.7: deferring initialization [ 1.253262] pciback 0000:00:1e.0: probing... [ 1.259316] pciback 0000:00:1f.0: probing... [ 1.266374] pciback 0000:00:1f.2: probing... [ 1.277488] pciback 0000:00:1f.5: probing... [ 1.288609] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:20 [ 1.297604] pci 0000:00:1c.0: IO window: disabled [ 1.302642] pci 0000:00:1c.0: MEM window: disabled [ 1.305661] pci 0000:00:1c.0: PREFETCH window: disabled [ 1.309692] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:30 [ 1.313713] pci 0000:00:1c.1: IO window: disabled [ 1.317744] pci 0000:00:1c.1: MEM window: disabled [ 1.320762] pci 0000:00:1c.1: PREFETCH window: disabled [ 1.324794] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07 [ 1.328814] pci 0000:00:1e.0: IO window: disabled [ 1.332847] pci 0000:00:1e.0: MEM window: disabled [ 1.336873] pci 0000:00:1e.0: PREFETCH window: disabled [ 1.339908] pci 0000:00:1c.0: setting latency timer to 64 [ 1.343931] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.347950] pci 0000:00:1c.1: setting latency timer to 64 [ 1.352988] pci 0000:00:1e.0: setting latency timer to 64 [ 1.357011] bus: 00 index 0 io port: [0, ffff] [ 1.360029] bus: 00 index 1 mmio: [0, ffffffffffffffff] [ 1.364056] bus: 20 index 0 mmio: [0, 0] [ 1.367076] bus: 20 index 1 mmio: [0, 0] [ 1.370097] bus: 20 index 2 mmio: [0, 0] [ 1.373116] bus: 20 index 3 mmio: [0, 0] [ 1.376139] bus: 30 index 0 mmio: [0, 0] [ 1.379159] bus: 30 index 1 mmio: [0, 0] [ 1.381171] bus: 30 index 2 mmio: [0, 0] [ 1.384193] bus: 30 index 3 mmio: [0, 0] [ 1.387215] bus: 07 index 0 mmio: [0, 0] [ 1.390236] bus: 07 index 1 mmio: [0, 0] [ 1.393255] bus: 07 index 2 mmio: [0, 0] [ 1.396277] bus: 07 index 3 io port: [0, ffff] [ 1.398291] bus: 07 index 4 mmio: [0, ffffffffffffffff] [ 1.402342] NET: Registered protocol family 2 [ 1.452037] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.452339] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 1.453861] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.454244] TCP: Hash tables configured (established 262144 bind 65536) [ 1.454247] TCP reno registered [ 1.464065] NET: Registered protocol family 1 [ 1.464154] Unpacking initramfs... done [ 1.469605] Freeing initrd memory: 7686k freed [ 1.471959] audit: initializing netlink socket (disabled) [ 1.471977] type=2000 audit(1234864187.433:1): initialized [ 1.475594] msgmni has been set to 1916 [ 1.475613] io scheduler noop registered [ 1.475625] io scheduler cfq registered (default) [ 1.475641] pci 0000:00:02.0: Boot video device [ 1.475876] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 1.475925] pcieport-driver 0000:00:1c.0: found MSI capability [ 1.475989] pci_express 0000:00:1c.0:pcie00: allocate port service [ 1.476027] pci_express 0000:00:1c.0:pcie02: allocate port service [ 1.476140] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 1.481986] pcieport-driver 0000:00:1c.1: found MSI capability [ 1.487031] pci_express 0000:00:1c.1:pcie00: allocate port service [ 1.491059] pci_express 0000:00:1c.1:pcie02: allocate port service [ 1.498674] loop: module loaded [ 1.500099] HP CISS Driver (v 3.6.20) [ 1.502134] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6 [ 1.505125] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 1.509211] e1000e 0000:00:19.0: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.520236] e1000e 0000:00:19.0: setting latency timer to 64 [ 1.532174] 0000:00:19.0: 0000:00:19.0: PHY reset is blocked due to SOL/IDER session. [ 1.707340] /*********************/ [ 1.707342] Current EEPROM Checksum : 0xd672 [ 1.707344] Calculated : 0xd672 [ 1.707345] Offset Values [ 1.707346] ======== ====== [ 1.707349] 00000000: 00 0f fe e7 05 54 00 08 ff ff 31 10 ff ff ff ff [ 1.707351] 00000010: 62 10 ff ff c3 10 18 28 3c 10 bd 10 86 80 00 00 [ 1.707353] 00000020: 01 0d 00 00 00 00 05 86 20 30 00 3b 00 00 07 8d [ 1.707355] 00000030: 84 06 40 2b 43 00 00 00 ad ba ad ba be 10 bf 10 [ 1.707357] 00000040: ad ba 4c 29 bd 10 ad ba 00 00 00 00 00 00 00 00 [ 1.707359] 00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 1.707361] 00000060: c0 00 00 40 32 12 07 40 ff ff ff ff ff ff ff ff [ 1.707363] 00000070: ff ff ff ff ff ff ff ff ff ff ff ff ff ff 72 d6 [ 1.707365] /*********************/ [ 1.744825] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:0f:fe:e7:05:54 [ 1.744828] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 1.744945] 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: 1062ff-0ff [ 1.745034] Xen virtual console successfully installed as xvc0 [ 1.745075] Event-channel device installed. [ 1.749661] : pciback: pcistub_init_devices_late [ 1.749664] pciback 0000:00:1d.7: initializing... [ 1.749667] pciback 0000:00:1d.7: initializing config [ 1.749669] pciback 0000:00:1d.7: initializing virtual configuration space [ 1.749672] pciback 0000:00:1d.7: added config field at offset 0x04 [ 1.749674] pciback 0000:00:1d.7: added config field at offset 0x3c [ 1.749676] pciback 0000:00:1d.7: added config field at offset 0x3d [ 1.749678] pciback 0000:00:1d.7: added config field at offset 0x0c [ 1.749680] pciback 0000:00:1d.7: added config field at offset 0x0d [ 1.749682] pciback 0000:00:1d.7: added config field at offset 0x0f [ 1.749693] pciback 0000:00:1d.7: added config field at offset 0x10 [ 1.749702] pciback 0000:00:1d.7: added config field at offset 0x14 [ 1.749711] pciback 0000:00:1d.7: added config field at offset 0x18 [ 1.749720] pciback 0000:00:1d.7: added config field at offset 0x1c [ 1.749729] pciback 0000:00:1d.7: added config field at offset 0x20 [ 1.749738] pciback 0000:00:1d.7: added config field at offset 0x24 [ 1.749747] pciback 0000:00:1d.7: added config field at offset 0x30 [ 1.749769] pciback 0000:00:1d.7: Found capability 0x1 at 0x50 [ 1.749771] pciback 0000:00:1d.7: added config field at offset 0x50 [ 1.749773] pciback 0000:00:1d.7: added config field at offset 0x52 [ 1.749777] pciback 0000:00:1d.7: added config field at offset 0x54 [ 1.749779] pciback 0000:00:1d.7: added config field at offset 0x56 [ 1.749782] pciback 0000:00:1d.7: added config field at offset 0x57 [ 1.749785] pciback 0000:00:1d.7: enabling device [ 1.749798] pciback 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.749801] pciback 0000:00:1d.7: reset device [ 1.749806] pciback 0000:00:1d.7: PCI INT A disabled [ 1.749810] pciback 0000:00:1d.2: initializing... [ 1.749811] pciback 0000:00:1d.2: initializing config [ 1.749813] pciback 0000:00:1d.2: initializing virtual configuration space [ 1.749815] pciback 0000:00:1d.2: added config field at offset 0x04 [ 1.749818] pciback 0000:00:1d.2: added config field at offset 0x3c [ 1.749820] pciback 0000:00:1d.2: added config field at offset 0x3d [ 1.749822] pciback 0000:00:1d.2: added config field at offset 0x0c [ 1.753015] pciback 0000:00:1d.2: added config field at offset 0x0d [ 1.757043] pciback 0000:00:1d.2: added config field at offset 0x0f [ 1.762087] pciback 0000:00:1d.2: added config field at offset 0x10 [ 1.766115] pciback 0000:00:1d.2: added config field at offset 0x14 [ 1.771151] pciback 0000:00:1d.2: added config field at offset 0x18 [ 1.775180] pciback 0000:00:1d.2: added config field at offset 0x1c [ 1.780214] pciback 0000:00:1d.2: added config field at offset 0x20 [ 1.784241] pciback 0000:00:1d.2: added config field at offset 0x24 [ 1.789275] pciback 0000:00:1d.2: added config field at offset 0x30 [ 1.793309] pciback 0000:00:1d.2: enabling device [ 1.798337] pciback 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 1.801353] pciback 0000:00:1d.2: reset device [ 1.806390] pciback 0000:00:1d.2: PCI INT C disabled [ 1.809408] pciback 0000:00:1d.1: initializing... [ 1.813434] pciback 0000:00:1d.1: initializing config [ 1.816455] pciback 0000:00:1d.1: initializing virtual configuration space [ 1.820484] pciback 0000:00:1d.1: added config field at offset 0x04 [ 1.825538] pciback 0000:00:1d.1: added config field at offset 0x3c [ 1.829566] pciback 0000:00:1d.1: added config field at offset 0x3d [ 1.834602] pciback 0000:00:1d.1: added config field at offset 0x0c [ 1.838630] pciback 0000:00:1d.1: added config field at offset 0x0d [ 1.843664] pciback 0000:00:1d.1: added config field at offset 0x0f [ 1.847699] pciback 0000:00:1d.1: added config field at offset 0x10 [ 1.853734] pciback 0000:00:1d.1: added config field at offset 0x14 [ 1.857762] pciback 0000:00:1d.1: added config field at offset 0x18 [ 1.862798] pciback 0000:00:1d.1: added config field at offset 0x1c [ 1.866825] pciback 0000:00:1d.1: added config field at offset 0x20 [ 1.871860] pciback 0000:00:1d.1: added config field at offset 0x24 [ 1.875887] pciback 0000:00:1d.1: added config field at offset 0x30 [ 1.880929] pciback 0000:00:1d.1: enabling device [ 1.884946] pciback 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.889013] pciback 0000:00:1d.1: reset device [ 1.894052] pciback 0000:00:1d.1: PCI INT B disabled [ 1.897070] pciback 0000:00:1d.0: initializing... [ 1.901096] pciback 0000:00:1d.0: initializing config [ 1.904117] pciback 0000:00:1d.0: initializing virtual configuration space [ 1.908144] pciback 0000:00:1d.0: added config field at offset 0x04 [ 1.912172] pciback 0000:00:1d.0: added config field at offset 0x3c [ 1.917207] pciback 0000:00:1d.0: added config field at offset 0x3d [ 1.921235] pciback 0000:00:1d.0: added config field at offset 0x0c [ 1.926270] pciback 0000:00:1d.0: added config field at offset 0x0d [ 1.930298] pciback 0000:00:1d.0: added config field at offset 0x0f [ 1.935340] pciback 0000:00:1d.0: added config field at offset 0x10 [ 1.939367] pciback 0000:00:1d.0: added config field at offset 0x14 [ 1.944401] pciback 0000:00:1d.0: added config field at offset 0x18 [ 1.948429] pciback 0000:00:1d.0: added config field at offset 0x1c [ 1.953464] pciback 0000:00:1d.0: added config field at offset 0x20 [ 1.957491] pciback 0000:00:1d.0: added config field at offset 0x24 [ 1.962526] pciback 0000:00:1d.0: added config field at offset 0x30 [ 1.966574] pciback 0000:00:1d.0: enabling device [ 1.971598] pciback 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.974616] pciback 0000:00:1d.0: reset device [ 1.979654] pciback 0000:00:1d.0: PCI INT A disabled [ 1.983680] pciback 0000:00:1b.0: initializing... [ 1.986699] pciback 0000:00:1b.0: initializing config [ 1.990726] pciback 0000:00:1b.0: initializing virtual configuration space [ 1.993747] pciback 0000:00:1b.0: added config field at offset 0x04 [ 1.998802] pciback 0000:00:1b.0: added config field at offset 0x3c [ 2.003837] pciback 0000:00:1b.0: added config field at offset 0x3d [ 2.007864] pciback 0000:00:1b.0: added config field at offset 0x0c [ 2.012899] pciback 0000:00:1b.0: added config field at offset 0x0d [ 2.016927] pciback 0000:00:1b.0: added config field at offset 0x0f [ 2.021969] pciback 0000:00:1b.0: added config field at offset 0x10 [ 2.026026] pciback 0000:00:1b.0: added config field at offset 0x14 [ 2.031061] pciback 0000:00:1b.0: added config field at offset 0x18 [ 2.035089] pciback 0000:00:1b.0: added config field at offset 0x1c [ 2.040123] pciback 0000:00:1b.0: added config field at offset 0x20 [ 2.044151] pciback 0000:00:1b.0: added config field at offset 0x24 [ 2.049185] pciback 0000:00:1b.0: added config field at offset 0x30 [ 2.053223] pciback 0000:00:1b.0: Found capability 0x1 at 0x50 [ 2.058241] pciback 0000:00:1b.0: added config field at offset 0x50 [ 2.062269] pciback 0000:00:1b.0: added config field at offset 0x52 [ 2.066298] pciback 0000:00:1b.0: added config field at offset 0x54 [ 2.071330] pciback 0000:00:1b.0: added config field at offset 0x56 [ 2.075357] pciback 0000:00:1b.0: added config field at offset 0x57 [ 2.080393] pciback 0000:00:1b.0: enabling device [ 2.084426] pciback 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 2.088447] pciback 0000:00:1b.0: reset device [ 2.093486] pciback 0000:00:1b.0: PCI INT A disabled [ 2.096604] ata_piix 0000:00:1f.2: version 2.12 [ 2.106591] ata_piix 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 2.109603] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 2.272026] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 2.272102] scsi0 : ata_piix [ 2.272181] scsi1 : ata_piix [ 2.272333] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x11f0 irq 14 [ 2.272341] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x11f8 irq 15 [ 3.068095] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.068117] ata1.01: SATA link down (SStatus 0 SControl 300) [ 3.076231] ata1.00: ATA-7: ST380815AS, 3.CHH, max UDMA/100 [ 3.076234] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.092238] ata1.00: configured for UDMA/100 [ 3.888091] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.888112] ata2.01: SATA link down (SStatus 0 SControl 300) [ 3.896226] ata2.00: ATAPI: TSSTcorpDVD-ROM TS-H353B, bc03, max UDMA/100 [ 3.912232] ata2.00: configured for UDMA/100 [ 3.912302] scsi 0:0:0:0: Direct-Access ATA ST380815AS 3.CH PQ: 0 ANSI: 5 [ 3.912411] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0GB/74.5GiB) [ 3.912423] sd 0:0:0:0: [sda] Write Protect is off [ 3.912425] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.912442] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.912479] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0GB/74.5GiB) [ 3.912489] sd 0:0:0:0: [sda] Write Protect is off [ 3.912491] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.912507] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.912511] sda: sda1 sda2 [ 3.932160] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.948534] scsi 1:0:0:0: CD-ROM TSSTcorp DVD-ROM TS-H353B bc03 PQ: 0 ANSI: 5 [ 3.948660] ata_piix 0000:00:1f.5: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 3.948664] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 4.104025] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 4.104099] scsi2 : ata_piix [ 4.104154] scsi3 : ata_piix [ 4.104191] ata3: SATA max UDMA/133 cmd 0x1260 ctl 0x1280 bmdma 0x1210 irq 18 [ 4.104196] ata4: SATA max UDMA/133 cmd 0x1268 ctl 0x1284 bmdma 0x1218 irq 18 [ 4.435136] ata3: SATA link down (SStatus 0 SControl 300) [ 4.767141] ata4: SATA link down (SStatus 0 SControl 300) [ 4.767194] mice: PS/2 mouse device common for all mice [ 4.767231] TCP cubic registered [ 4.767234] NET: Registered protocol family 17 [ 4.767320] registered taskstats version 1 [ 4.767983] Freeing unused kernel memory: 220k freed [ 4.819225] ACPI: SSDT DEFCD42B, 03AC (r1 COMPAQ CPU_TM2 1 MSFT 100000E) [ 4.819488] ACPI: SSDT DEFCD2AF, 017C (r1 COMPAQ CST 1 MSFT 100000E) [ 4.819659] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 4.820794] processor ACPI0007:00: registered as cooling_device0 [ 4.820798] ACPI: Processor [CPU0] (supports 8 throttling states) [ 4.820968] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 4.821186] processor ACPI0007:01: registered as cooling_device1 [ 4.821190] ACPI: Processor [CPU1] (supports 8 throttling states) [ 4.821338] ACPI: CPU-1 (power states: C1[C1] C2[C2]) [ 4.821522] processor ACPI0007:02: registered as cooling_device2 [ 4.821668] ACPI: CPU-1 (power states: C1[C1] C2[C2]) [ 4.821857] processor ACPI0007:03: registered as cooling_device3 [ 5.064926] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx [ 5.184440] kjournald starting. Commit interval 5 seconds [ 5.184445] EXT3-fs: mounted filesystem with ordered data mode. [ 6.201295] udevd version 125 started [ 6.692734] input: Power Button (FF) as /class/input/input0 [ 6.704011] ACPI: Power Button (FF) [PWRF] [ 6.704094] input: Power Button (CM) as /class/input/input1 [ 6.734074] ACPI: Power Button (CM) [PBTN] [ 7.490451] EXT3 FS on dm-3, internal journal [ 8.970433] kjournald starting. Commit interval 5 seconds [ 8.970604] EXT3 FS on dm-1, internal journal [ 8.970608] EXT3-fs: mounted filesystem with ordered data mode. [ 9.017527] Adding 2654200k swap on /dev/mapper/sam-swap_1. Priority:-1 extents:1 across:2654200k [ 10.076649] 0000:00:19.0: eth0: Link is Up 100 Mbps Full Duplex, Flow Control: None [ 10.076655] 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 12.310219] Bridge firewalling registered [ 12.311370] tmpbridge: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. [ 12.668349] eth0 renamed to peth0 by ip [1895] [ 12.670272] tmpbridge renamed to eth0 by ip [1898] [ 12.752647] 0000:00:19.0: peth0: Link is Up 100 Mbps Full Duplex, Flow Control: None [ 12.752653] 0000:00:19.0: peth0: 10/100 speed: disabling TSO [ 12.759202] device peth0 entered promiscuous mode [ 12.779094] : eth0: topology change detected, propagating [ 12.779101] : eth0: port 1(peth0) entering forwarding state [ 93.770213] pciback pci-1-0: allocated pdev @ 0xffff8800edc08640 [ 93.770666] pciback pci-1-0: getting be setup [ 93.770946] pciback pci-1-0: exporting dom 0 bus 0 slot 1d func 0 [ 93.770946] pciback: vpci: 0000:00:1d.0: assign to virtual slot 0 [ 93.771593] pciback pci-1-0: exporting dom 0 bus 0 slot 1d func 1 [ 93.771593] : pciback: vpci: 0000:00:1d.1: assign to virtual slot 0 func 1 [ 93.772267] pciback pci-1-0: Publishing pci roots [ 93.772382] pciback pci-1-0: writing root 0 at 0000:00 [ 93.791380] pciback pci-1-0: fe state changed 1 [ 93.820218] (cdrom_add_media_watch() file=drivers/xen/blkback/cdrom.c, line=108) nodename:backend/vbd/1/768 [ 93.820226] (cdrom_is_type() file=drivers/xen/blkback/cdrom.c, line=95) type:0 [ 94.509681] qemu-dm[2578]: segfault at c ip 00000000004734a4 sp 00007fff31294610 error 4 in qemu-dm[400000+f4000]