| |
|
 |
|
 |
|
|
|
| |
|
|
xen-devel
[Xen-devel] Unable to switch input to xen from serial console
Hi all,
When i do 'xm dmesg' the last statement says "*** Serial input ->
DOM0 (type 'CTRL-a' three times to switch input to Xen)" (i have no clue
what's that supposed to mean??) But when i press ctrl-a three times at
the serial console, nothing happens.
Iam using minicom to connect to the serial port of xen machine. Once
xen machine is booted i get the login prompt on the serial console. So i
dont think there is any problem with the serial setup.
My grub.conf is as below
title Fedora Core (2.6.18.8-xen-kdb)
root (hd0,5)
kernel /boot/xen-3.2.0.debug.gz console=com1,vga com1=115200,8n1
module /boot/vmlinuz-2.6.18.8-xen.kdb ro root=LABEL=/1 rhgb quiet
console=tty1 console=ttyS1,115200,8n1
module /boot/initrd-2.6.18.8-xen.img
My actual purpose is to break into xen hypervisor kdb. As per the instruction
ctrl-\ is supposed to give me the xkdb> prompt. But when i press ctrl-\ at the
serial console nothing happens. So am assuming the problem is related to me not
able
to switch to xen input from serial console in the first place.
thanks,
Sandesh
Please do not print this email unless it is absolutely necessary.
The information contained in this electronic message and any attachments to
this message are intended for the exclusive use of the addressee(s) and may
contain proprietary, confidential or privileged information. If you are not the
intended recipient, you should not disseminate, distribute or copy this e-mail.
Please notify the sender immediately and destroy all copies of this message and
any attachments.
WARNING: Computer viruses can be transmitted via email. The recipient should
check this email and any attachments for the presence of viruses. The company
accepts no liability for any damage caused by any virus transmitted by this
email.
www.wipro.com
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
|
|
| |
|
Home