Re: [Xen-devel] X86_64 and 4GB RAM using Flat Memory Model?

["John Hannfield" <hal9020@xxxxxxxxx>]

> What does the start of a native Linux dmesg output look like (i.e, the bits
> where it prints out the memory map)?
Yes, it's quite different.
Now that you mention it, xen sees the memory which are marked as (usable),
but not the ones marked as (reserved). Whereas debian etch kernel sees
the (reserved) ones as well. Below if the dmesg output from the debian etch
bootup.

Bootdata ok (command line is root=/dev/md0 ro )
Linux version 2.6.18-3-amd64 (Debian 2.6.18-7) (waldi@xxxxxxxxxx) (gcc
version 4.1.2 20061115 (prerelease) (Debian 4.1.1-20)) #1 SMP Mon Dec
4 17:04:37 CET 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable)
BIOS-e820: 00000000bfff0000 - 00000000bfffe000 (ACPI data)
BIOS-e820: 00000000bfffe000 - 00000000c0000000 (ACPI NVS)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
DMI present.
ACPI: RSDP (v002 ACPIAM                                ) @ 0x00000000000f9480
ACPI: XSDT (v001 A M I  OEMXSDT  0x12000614 MSFT 0x00000097) @
0x00000000bfff0100
ACPI: FADT (v003 A M I  OEMFACP  0x12000614 MSFT 0x00000097) @
0x00000000bfff0290
ACPI: MADT (v001 A M I  OEMAPIC  0x12000614 MSFT 0x00000097) @
0x00000000bfff0390
ACPI: SPCR (v001 A M I  OEMSPCR  0x12000614 MSFT 0x00000097) @
0x00000000bfff0410
ACPI: SLIT (v001 A M I  OEMSLIT  0x12000614 MSFT 0x00000097) @
0x00000000bfff04a0
ACPI: OEMB (v001 A M I  AMI_OEM  0x12000614 MSFT 0x00000097) @
0x00000000bfffe040
ACPI: HPET (v001 A M I  OEMHPET0 0x12000614 MSFT 0x00000097) @
0x00000000bfff54d0
ACPI: SRAT (v001 AMD    HAMMER   0x00000001 AMD  0x00000001) @
0x00000000bfff5510
ACPI: SSDT (v001 A M I  POWERNOW 0x00000001 AMD  0x00000001) @
0x00000000bfff5620
ACPI: DSDT (v001  DATER DATER111 0x00000111 INTL 0x20051117) @
0x0000000000000000
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 1 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 3 -> Node 1
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 0-80000000
SRAT: Node 1 PXM 1 80000000-c0000000
SRAT: Node 1 PXM 1 80000000-140000000
NUMA: Using 31 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000080000000
Bootmem setup node 1 0000000080000000-0000000140000000
On node 0 totalpages: 516134
 DMA zone: 3054 pages, LIFO batch:0
 DMA32 zone: 513080 pages, LIFO batch:31
On node 1 totalpages: 513520
 DMA32 zone: 254960 pages, LIFO batch:31
 Normal zone: 258560 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x2008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
Processor #2 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
Processor #3 15:1 APIC version 16
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Setting APIC routing to physical flat
ACPI: HPET id: 0x10de8201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
SMP: Allowing 4 CPUs, 0 hotplug CPUs
Built 2 zonelists.  Total pages: 1029654
Kernel command line: root=/dev/md0 ro
Initializing CPU#0
--

John

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel