WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-devel

Re: [Xen-users] xen 3.0 boot problem

To: "Ian Pratt" <m+Ian.Pratt@xxxxxxxxxxxx>
Subject: Re: [Xen-users] xen 3.0 boot problem
From: Stephan Böni <boeni@xxxxxx>
Date: Thu, 6 Oct 2005 09:44:08 +0200
Cc: xen-devel@xxxxxxxxxxxxxxxxxxx, xen-users@xxxxxxxxxxxxxxxxxxx
Delivery-date: Thu, 06 Oct 2005 07:42:54 +0000
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
Thread-index: AcXI0kkH23l1WElxTKCOLYGlBrqdrAAzs3zQAAZkYzAADCWq0AAXRObg
Thread-topic: [Xen-users] xen 3.0 boot problem
It works fine with Xen 2.0. The qla2300 compatible cards are the most
used fibre channel host bus adapter to attach a SAN. Without this
driver you can say goodbye to a lot SAN solutions.

We have some IBM systems with this adapter in our office, because
IBM uses the QLogic 2312 chipset as default too. If i can help to
determine the bug, i will do anything. (But my programming knowledge
is not so big. Therefore i need a lot of help.)

Stephan


> Has anyone used xen succefully with a qla2300?
> 
> What machines have this card?
> 
> Ian
> 
> > I've installed Xen 3.0-devel on SUSE Linux without any problems.
> > But when i tryed to boot the system, i've got a funny problem:
> > 
> > qla2300 0000:05:01.0: Found an ISP2312, irq 185, iobase 
> > 0xf8812000 qla2300 0000:05:01.0: Configuring PCI space...
> > qla2300 0000:05:01.0: Configure NVRAM parameters...
> > qla2300 0000:05:01.0: Verifying loaded RISC code...
> > qla2300 0000:05:01.0: Waiting for LIP to complete...
> > 
> > until here all works fine, but then:
> > 
> > input: PS/2 Generic Mouse on synaptcs-pt/serio0 qla2300 
> > 0000:05:01.0: LIP reset occured (f7f7).
> > qla2300 0000:05:01.0: LOOP UP detected (2 Gbps).
> > qla2300 0000:05:01.0: Topology - (F_Port), Host Loop address 0xffff
> > scsi3 : qla2xxx
> > qla2300 0000:04:02.0:
> >   QLogic Fibre Channel HBA Driver: 8.01.00b5-k
> >   QLogic QLA2340 - 133MHz PCI-X to 2Gb FC, Single Channel
> >   ISP2312: PCI-X (100 MHz) @ 0000:05:01.0 hdma+, host#=3,
> > fw=3.03.15 IPX
> > Loading kernel/fs/reiserfs/reiserfs.ko
> > Waiting for device /dev/sda4 to appear: .....not found --- 
> > exiting to /bin/sh $
> > 
> > if i use the standard (bigsmp) kernel the normal massages are:
> > 
> > SCSI device sda: 41943040 512-byte hdwr sectors (21475 MB) 
> > SCSI device sda: drive cache: write back SCSI device sda: 
> > 41943040 512-byte hdwr sectors (21475 MB) SCSI device sda: 
> > drive cache: write back
> >  sda: sda1 sda2 sda3 sda4
> > ....usw.
> > 
> > Well, my qla2300 has the storage attached not a generic mouse.
> > Of course it isn't possible to boot from this mouse. :-(
> 
> 
> 

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

<Prev in Thread] Current Thread [Next in Thread>