# -*- mode: python; -*- #============================================================================ # Python configuration setup for 'xm create'. # This script sets the parameters used when a domain is created using 'xm create'. # You use a separate script for each domain you want to create, or # you can set the parameters for the domain on the xm command line. #============================================================================ #---------------------------------------------------------------------------- # Kernel image file. kernel = "/boot/vmlinuz-2.6.11-xenU" # Optional ramdisk. ramdisk = "/root/ttylinux-ram" # The domain build function. Default is 'linux'. builder='linux' # Initial memory allocation (in megabytes) for the new domain. memory = 64 # A name for your domain. All domains must have different names. name = "xmr" # Which CPU to start domain on? #cpu = -1 # leave to Xen to pick # Number of Virtual CPUS to use, default is 1 #vcpus = 1 #---------------------------------------------------------------------------- # Define network interfaces. # Number of network interfaces. Default is 1. nics=0 # Optionally define mac and/or bridge for the network interfaces. # Random MACs are assigned if not given. #vif = [ 'mac=aa:00:00:00:00:11, bridge=xen-br0' ] #---------------------------------------------------------------------------- # Define the disk devices you want the domain to have access to, and # what you want them accessible as. # Each disk entry is of the form phy:UNAME,DEV,MODE # where UNAME is the device, DEV is the device name the domain will see, # and MODE is r for read-only, w for read-write. #disk = [ 'phy:hda1,hda1,w' ] #---------------------------------------------------------------------------- # Set the kernel command line for the new domain. # You only need to define the IP parameters and hostname if the domain's # IP config doesn't, e.g. in ifcfg-eth0 or via DHCP. # You can use 'extra' to set the runlevel and custom environment # variables used by custom rc scripts (e.g. VMID=, usr= ). # Set if you want dhcp to allocate the IP address. #dhcp="dhcp" # Set netmask. #netmask= # Set default gateway. #gateway= # Set the hostname. #hostname= "vm%d" % vmid # Set root device. root = "/dev/ram0 ro" # Root device for nfs. #root = "/dev/nfs" # The nfs server. #nfs_server = '169.254.1.0' # Root directory on the nfs server. #nfs_root = '/full/path/to/root/directory' # Sets runlevel 4. extra = "4 ramdisk_size=16384" #---------------------------------------------------------------------------- # Set according to whether you want the domain restarted when it exits. # The default is 'onreboot', which restarts the domain when it shuts down # with exit code reboot. # Other values are 'always', and 'never'. #restart = 'onreboot' #============================================================================