Hi,
Updated to current bk today, and my machine stopped booting ...
I've tracked it down to the apic changes from end of last week.
cset 1.1307 boots fine, 1.1308 doesn't.
Diff of the boot messages is below. Full logs are also attached.
Gerd
--- log-1.1307 2005-04-21 14:40:57.372885027 +0200
+++ log-1.1308 2005-04-21 14:38:52.236553392 +0200
@@ -7,7 +7,7 @@
http://www.cl.cam.ac.uk/netos/xen
University of Cambridge Computer Laboratory
- Xen version 3.0-devel (kraxel@xxxxxxxxxxxxx) (gcc version 3.3.5 20050117
(prerelease) (SUSE Linux)) Thu Apr 21 14:36:34 CEST 2005
+ Xen version 3.0-devel (kraxel@xxxxxxxxxxxxx) (gcc version 3.3.5 20050117
(prerelease) (SUSE Linux)) Thu Apr 21 14:32:57 CEST 2005
Latest ChangeSet: information unavailable
(XEN) Physical RAM map:
@@ -29,26 +29,24 @@
(XEN) ACPI: DSDT (v001 ASUS P3B_F 0x00001000 MSFT 0x0100000b) @ 0x00000000
(XEN) Using scheduler: Borrowed Virtual Time (bvt)
(XEN) Initializing CPU#0
-(XEN) Detected 451.030 MHz processor.
+(XEN) Detected 451.035 MHz processor.
(XEN) Local APIC disabled by BIOS -- reenabling.
(XEN) Found and enabled local APIC!
(XEN) CPU0: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
(XEN) CPU caps: 0383fbff 00000000 00000000 00000000
(XEN) CPU0 booted
(XEN) SMP motherboard not detected.
-(XEN) enabled ExtINT on CPU#0
-(XEN) ESR value before enabling vector: 00000000
-(XEN) ESR value after enabling vector: 00000000
+(XEN) masked ExtINT on CPU#0
(XEN) Using local APIC timer interrupts.
(XEN) Calibrating APIC timer for CPU0...
-(XEN) ..... CPU speed is 451.0230 MHz.
-(XEN) ..... Bus speed is 100.2271 MHz.
+(XEN) ..... CPU clock speed is 451.0303 MHz.
+(XEN) ..... host bus clock speed is 100.2288 MHz.
(XEN) ..... bus_scale = 0x000066A2
(XEN) Time init:
-(XEN) .... System Time: 12217304ns
-(XEN) .... cpu_freq: 00000000:1AE22E48
-(XEN) .... scale: 00000002:3796C7A7
-(XEN) .... Wall Clock: 1114087225s 40000us
+(XEN) .... System Time: 80262159ns
+(XEN) .... cpu_freq: 00000000:1AE24040
+(XEN) .... scale: 00000002:37954C49
+(XEN) .... Wall Clock: 1114087099s 0us
(XEN) PCI: PCI BIOS revision 2.10 entry at 0xf08c0, last bus=1
(XEN) PCI: Using configuration type 1
(XEN) PCI: Probing PCI hardware
@@ -72,7 +70,7 @@
(XEN) Initrd len 0x2263800, start at 0xc0577000
(XEN) Scrubbing Free RAM: ...........done.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to
Xen).
-Linux version 2.6.11-xen0-1.1307 (kraxel@eskarina) (gcc version 3.3.5 20050117
(prerelease) (SUSE Linux)) #1 Thu Apr 21 14:39:52 CEST 2005
+Linux version 2.6.11-xen0-1.1308 (kraxel@eskarina) (gcc version 3.3.5 20050117
(prerelease) (SUSE Linux)) #1 Thu Apr 21 14:36:08 CEST 2005
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000010000000 (usable)
256MB LOWMEM available.
@@ -83,7 +81,7 @@ Built 1 zonelists
Kernel command line:
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
-Xen reported: 451.030 MHz processor.
+Xen reported: 451.035 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
@@ -118,7 +116,7 @@ io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
-FDC 0 is a post-1991 82077
+floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
HP CISS Driver (v 2.6.4)
@@ -144,39 +142,3 @@ PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA
-hda: IBM-DTLA-305040, ATA DISK drive
-ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
-hdc: HL-DT-ST DVDRAM GSA-4040B, ATAPI CD/DVD-ROM drive
-hdd: LG CD-RW CED-8080B, ATAPI CD/DVD-ROM drive
-ide1 at 0x170-0x177,0x376 on irq 15
-hda: max request size: 128KiB
-hda: 80418240 sectors (41174 MB) w/380KiB Cache, CHS=65535/16/63, UDMA(33)
- hda: hda1 hda2 < hda5 hda6 hda7 > hda4
-hdc: ATAPI 32X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
-Uniform CD-ROM driver Revision: 3.20
-hdd: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
-Red Hat/Adaptec aacraid driver (1.1.2-lk2 Apr 21 2005)
-3ware Storage Controller device driver for Linux v1.26.02.000.
-Fusion MPT base driver 3.01.18
-Copyright (c) 1999-2004 LSI Logic Corporation
-Fusion MPT SCSI Host driver 3.01.18
-mice: PS/2 mouse device common for all mice
-input: AT Translated Set 2 keyboard on isa0060/serio0
-input: PS/2 Generic Mouse on isa0060/serio1
-md: raid0 personality registered as nr 2
-md: raid1 personality registered as nr 3
-md: raid5 personality registered as nr 4
-raid5: automatically using best checksumming function: pIII_sse
- pIII_sse : 668.400 MB/sec
-raid5: using function: pIII_sse (668.400 MB/sec)
-md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
-device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@xxxxxxxxxx
-NET: Registered protocol family 2
-IP: routing cache hash table of 2048 buckets, 16Kbytes
-TCP established hash table entries: 16384 (order: 5, 131072 bytes)
-TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
-TCP: Hash tables configured (established 16384 bind 16384)
-NET: Registered protocol family 1
-NET: Registered protocol family 17
-Bridge firewalling registered
-Freeing unused kernel memory: 324k freed
log-1.1307
Description: Text document
log-1.1308
Description: Text document
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home