WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-devel

Re: [Xen-devel] Re: hda: lost interrupt

To: <xen-devel@xxxxxxxxxxxxxxxxxxx>
Subject: Re: [Xen-devel] Re: hda: lost interrupt
From: "Rich Persaud" <rich@xxxxxxxxxxxxx>
Date: Fri, 15 Apr 2005 11:34:15 -0700
Delivery-date: Fri, 15 Apr 2005 18:36:03 +0000
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
List-help: <mailto:xen-devel-request@lists.xensource.com?subject=help>
List-id: Xen developer discussion <xen-devel.lists.xensource.com>
List-post: <mailto:xen-devel@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=unsubscribe>
Sender: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
Thread-index: AcVB6SA54pw26eBAR3CGAA4rFb/YJAAAJoWT
Thread-topic: [Xen-devel] Re: hda: lost interrupt

I recall that the K7S5A motherboard has a unique, dedicated bus for the onboard IDE controller (and NIC, if present). 

Is that also true for the K7S8X?

How far does the dom0 boot proceed before stopping?

As a test, can you disable the onboard IDE controller and boot the Xen LiveCD off a drive on the Promise PCI controller?

Rich

-----Original Message-----
From: Fred Richards <tech@xxxxxxxxxxxxx>
Date: Fri, 15 Apr 2005 15:38:56
To:xen-devel@xxxxxxxxxxxxxxxxxxx
Subject: [Xen-devel] Re: hda: lost 


joe <toby4u <at> freenet.de> writes:

>
> hi i am a complete newbie to xen,
> and i have still a problem with hda(hdc): lost interrupt coming from the
> 2.6.10-xen0 kernel on an asrock k7s8x board with an additional promise
> 100 controller(doesn't get recognized anyway) an amd athlon 2400+ and
> 512 mb ram.
>
> an ideas?
>
> regards
> toby
>


Ok, now that's odd.  I'm having the same problem, and much of my hardware is
similar.  I have an ECS K7S5A motherboard, AMD Athlon 2400+ and a promise
Ultra100TX2 controller.  Note, however, the Promise card is not the one having
the issue.  In other words, my error is hdc: lost interrupt ... my primary
controller has 2 drives (hda, hdb) my second controller two dvdrom devices (hdc,
hdd) and one storage drive on the promise card (hde).  If I disable hdc, the
error changes to hdd lost interrupt.

I've tried even the LiveCD 2.0.5 version.  It works perfect on other hardware,
but has an issue booting Domain 0.


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
<Prev in Thread] Current Thread [Next in Thread>