| |
|
 |
|
 |
|
|
|
| |
|
|
xen-devel
On Wed, 23 Mar 2005 10:59:52 +0000 (UTC), Michael Stoehrel
<mstoehrel@xxxxxxxxxxx> wrote:
> Hi all
>
> I am running xen (2.0.5) with debian sarge.
> Sources compiled (2.6.10) on a via epia pd-10000 with 2 nics.
>
> eth0: dhcp
> eth1: static
>
> before xend started:
> --------------------
>
> outgoing trafic OK (through eth0)
> incoming trafic on both nics ok
>
> eth0 Link encap:Ethernet HWaddr 00:40:63:DB:55:18
> inet addr:192.168.253.55 Bcast:192.168.253.255 Mask:255.255.255.0
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:20 errors:0 dropped:0 overruns:0 frame:0
> TX packets:15 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:2664 (2.6 KiB) TX bytes:1562 (1.5 KiB)
> Interrupt:9 Base address:0xd000
>
> eth1 Link encap:Ethernet HWaddr 00:40:63:DB:55:4A
> inet addr:192.168.254.5 Bcast:192.168.254.255 Mask:255.255.255.0
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:0 (0.0 b) TX bytes:126 (126.0 b)
> Interrupt:11 Base address:0xe400
>
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> UP LOOPBACK RUNNING MTU:16436 Metric:1
> RX packets:1 errors:0 dropped:0 overruns:0 frame:0
> TX packets:1 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:104 (104.0 b) TX bytes:104 (104.0 b)
>
> after xend started:
> -------------------
>
> outgoing traffic dead
> incoming traffic on eth0 dead
> incoming trafic on eth1 ok
> eth0 Link encap:Ethernet HWaddr 00:40:63:DB:55:18
> inet addr:192.168.253.55 Bcast:192.168.253.255 Mask:255.255.255.0
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:25 errors:0 dropped:0 overruns:0 frame:0
> TX packets:15 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:2990 (2.9 KiB) TX bytes:1562 (1.5 KiB)
> Interrupt:9 Base address:0xd000
>
> eth1 Link encap:Ethernet HWaddr 00:40:63:DB:55:4A
> inet addr:192.168.254.5 Bcast:192.168.254.255 Mask:255.255.255.0
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:0 (0.0 b) TX bytes:252 (252.0 b)
> Interrupt:11 Base address:0xe400
>
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> UP LOOPBACK RUNNING MTU:16436 Metric:1
> RX packets:2 errors:0 dropped:0 overruns:0 frame:0
> TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:208 (208.0 b) TX bytes:208 (208.0 b)
>
> xen-br0 Link encap:Ethernet HWaddr 00:00:00:00:00:00
> inet addr:192.168.253.55 Bcast:192.168.253.255
> Mask:255.255.255.255
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
>
> because bridging connects to eth0 ip traffic on a started virtual machine is
> dead
>
> if I disable 1 nic the BIOS, all is incomming and outgoing trafic is ok
> and the virtual machine too.
You can force xen to set up the bridge onto eth1 instead of eth0...
just edit /etc/xen/scripts/network and replace
netdev=${netdev:-eth1}
with
netdev=${netdev:-eth0}
-------------------------------------------------------
This SF.net email is sponsored by: 2005 Windows Mobile Application Contest
Submit applications for Windows Mobile(tm)-based Pocket PCs or Smartphones
for the chance to win $25,000 and application distribution. Enter today at
http://ads.osdn.com/?ad_id=6882&alloc_id=15148&op=click
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel
|
|
|
| |
|
Home