Re: [Xen-devel] Can't boot 2.0.5 binaries

[Yvette <yentlsoup@xxxxxxxxx>]

Scott,

Hopefully somebody who has dealt with this issue before will give you
some more useful info, but in the interim I put the stock 2.0.5 dom0
kernel on one of my test machines and booted it so I could get the
dmesg for you. Sorry the hardware isn't more similar.

-Yvette


On Thu, 17 Mar 2005 09:21:45 -0800, Scott Laird <scott@xxxxxxxxxxx> wrote:
> I'm setting up a new PC to run Xen, and I can't get the pre-built 2.0.5
> binaries to boot.  Xen loads fine, and the 2.6.10-xen0 kernel starts to
> load, but it locks up after 'Initializing Cryptographic API'.  I'll
> have to wire up a serial console to get a full boot log, but I won't be
> able to do that until tonight at the earliest.
> 
> The hardware is an Athlon 64 3000+ (S939) w/ 1 GB of RAM on a MSI
> RS480M2-IL motherboard.  I'm trying to load the stock 32-bit Xen and
> kernel.
> 
> Has anyone seen this before?  At the very least, could someone send me
> their dmesg output from booting the stock 2.0.5 dom0 kernel, so I can
> see which subsystems come after the crypto API?
> 
> Thanks.
> 
> Scott
>

xen0_2.6.10_vanilla_on_ibm_t22.dmesg
Description: Binary data