Re: [Xen-devel] Booting Xen on Redhat 4.0

[Jerone Young <jyoung5@xxxxxxxxxx>]

Ah, your problem is a common one. Basically you need to rebuild the
kernel and add support for your scsi card. To do this do the following:
        - go into linux-?-xen0 dir
        - type "make menuconfig ARCH=xen"
        - under Device Driver --> Fusion MPT device support .. you will need to
compile these as module
        - type "make ARCH=xen"
        - type "make ARCH=xen modules_install"
        - type "make ARCH=xen install"
        - create your new initrd and your set

On Wed, 2005-03-09 at 12:18 -0800, Kevin Fox wrote:
> Forgive me if this has been mentioned elsewhere, but I am unable to
> bring up Xen on Redhat 4.0 because of a missing initrd module.
> I've tried creating a new initrd (with mkinitrd) but it complains about
> missing mpt modules which do not appear to be built in the src tree (2.0.4).
> 
> Is there something simple I'm missing here?
> 
> TIA
> Kev
> 
> 
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.sourceforge.net/lists/listinfo/xen-devel
> 
-- 
Jerone Young
Open Virtualization
IBM Linux Technology Center
jyoung5@xxxxxxxxxx
512-838-1157 (T/L: 678-1157)



-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel