| |
|
 |
|
 |
|
|
|
| |
|
|
xen-community
Re: [Xen-devel] Xen not booting !
Hello,
Leena M. schrieb:
Hi All,
I am not able to boot Xen .
My "/boot/grub/menu.lst" has this entry
title Xen 3.3.2-rc5 / Debian GNU/Linux, kernel 2.6.18.8-xen
root (hd0,0)
kernel /boot/xen-3.3.2-rc5.gz
module /boot/vmlinuz-2.6.18.8-xen root=/dev/sda1 ro console=tty0
module /boot/initrd.img-2.6.18.8-xen
savedefault
I am getting following error :
ERROR WHILE BOOTING =>
------------------------------
--------------------------------------------------------------------
Booting 'Xen 3.3.2-rc5 / Debian GNU/Linux, Kernel 2.6.18.8-xen'
root (hda0,0)
looks like a typo here you entered this by hand didn't you?!
Filesystem type is ext2fs, partition type 0x83
kernel /boot/xen-3.3.2-rc5.gz
[Multiboot-elf,<0x100000:0xfd6b0:0x77950>,shtab=0x275078,entry=0
grub found the file
module /boot/vmlinuz-2.6.18.8-xen root=/dev/sda1 ro console=tty0
[Multiboot-module @ 0x276000,0x5419c0 bytes]
grub found the file
module /boot/initrd.img-2.6.18.8-xen
Error 15: File not found
grub found no such file /boot/initrd.img-2.6.18.8-xen on (hd0,0)...
typo in filename?
on grubs prompt a "ls (hd0,0)/boot" should show what grub can load and
what not...
press any key to continue ...
-----------------------------------------------------------------------------------------------------
Please Help me.
----
I followed the following procedure from the
"Introduction to the Open Source Xen Hypervisor"
Zach Shepherd and Wenjin
taken from xen blog.
Install required packages
(e.g. apt-get install gawk libssl-dev libx11-dev gettext libncurses-dev
build-essential python-dev texlive-latex-base transfig tetex-extra
bcc bin86 pciutils-dev git-core curl texinfo libc6-dev mercurial
bridge-utils graphviz)
Download the latest Xen release
(e.g. hg clone http://xenbits.xen.org/xen-3.3-testing.hg)
Compile and Install
(e.g. make world; make install)
Create a ramdisk
(e.g depmod 2.6.18.8-xen;mkinitramfs -o /boot/initrd.img-2.6.18.8-xen
2.6.18.8-xen )
Configure the bootloader
(e.g update-grub)
Following are the entries in relevant files =>
-------------------------------------------------------------------------------------------------
# cat /etc/fstab
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/sda1 / ext3 defaults,errors=remount-ro
0 1
/dev/sda5 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto 0 0
-----------------------------------------------------------------------------------------------------
# cat /boot/grub/device.map
(hd0) /dev/sda
(hd1) /dev/sdb
-------------------------------------------------------------------------------------------------------
Regards,
Leena
------------------------------------------------------------------------
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
|
|
| |
|
Home