Here it is.
Thankyou very much!
FG
Da: Harsh Puri [mailto:Harsh.Puri@xxxxxxxxxx]
Inviato: giovedì 7 aprile 2011 10:36
A: cluster@xxxxxxxx; xen-api@xxxxxxxxxxxxxxxxxxx
Oggetto: RE: [Xen-API] [XCP 1.0] NetApp issue
Hi there,
Can you please send across the SMlog too?
Regards
Harsh
From: xen-api-bounces@xxxxxxxxxxxxxxxxxxx [mailto:xen-api-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of cluster@xxxxxxxx
Sent: 07 April 2011 08:19
To: xen-api@xxxxxxxxxxxxxxxxxxx
Subject: [Xen-API] [XCP 1.0] NetApp issue
Hi all,
I am experimenting an issue with XCP 1.0 and NetApp storage model .
My XCP server has a QLE2460 single channel fibre card. I have successfully connected the server to the storage. I can see the LUN connected via fibre channel by using scli command:
scli output:
--------------------------------------------------------------------------------
HBA Instance 0: QLE2460 Port 1 WWPN 21-00-00-E0-8B-87-A8-D7 PortID 01-0E-00
--------------------------------------------------------------------------------
Target WWPN 50-0A-09-81-88-0D-A2-B5 PortID 01-00-00
------------------------------------------------------------
Product Vendor : NETAPP
Product ID : LUN
Product Revision : 7320
LUN : 0
Size : 1900.00 GB
Type : SBC-2 Direct access block device
(e.g., magnetic disk)
WWULN : 4E-45-54-41-50-50-20-20-20-4C-55-4E-20-50-34-
47
36-54-4A-62-4E-33-6F-52-44-00-00-00-00-00-00-00
OS LUN Name : /dev/sdc;/dev/sg4;
------------------------------------------------------------
Target WWPN 50-0A-09-81-98-0D-A2-B5 PortID 01-01-00
------------------------------------------------------------
Product Vendor : NETAPP
Product ID : LUN
Product Revision : 7320
LUN : 0
Size : 1900.00 GB
Type : SBC-2 Direct access block device
(e.g., magnetic disk)
WWULN : 4E-45-54-41-50-50-20-20-20-4C-55-4E-20-50-34-
47
36-54-4A-62-4E-33-6F-52-44-00-00-00-00-00-00-00
OS LUN Name : /dev/sde;/dev/sg6;
We can see 2 LUN due to multipath connection to the storage.
When I try to create a new storage repository via xsconsole I get this error:
Operation Failed
The SR backend failed to complete the operation
<Enter> OK
Here is what I find in my /var/log/messages:
Apr 7 09:12:42 xhost0 fe: 26990 (/opt/xensource/sm/LVMoHBASR <methodCall><methodName>sr_probe</methodName><par...) exitted with code 1
Apr 7 09:12:42 xhost0 xsconsole: Exception: The SR backend failed to complete the operation
You will find attached my xensource.log extracted log with the error.
Thanks all,
FG
Home
