|
|
|
|
|
|
|
|
|
|
xen-api
[Xen-API] update needed for qla4xxx driver on xcp1.0beta
Hey all,
FYI, it seems there is a bug in the qla4xxx driver shipped with XCP1.0beta
(module version 5.02.03.00.05.07-c2). I tested it on an IBM x3650 with a
QLE4062C card and found the device would keep resetting itself, as shown here
in the dmesg:
Feb 7 12:16:37 xenserver-2 kernel: qla4xxx 0000:1b:01.3:
qla4xxx_get_fwddb_entry: DDB[2] MB0 4000 Tot 1 Next 0 State 0004 ConnErr
00000000 10.0.69.1 :3260 "iqn.2011-02.servers.nas1:xenstore"
Feb 7 12:17:17 xenserver-2 kernel: qisioctl6: ql4_scsi_passthru: ERROR =
command timeout.
Feb 7 12:17:17 xenserver-2 kernel: qla4xxx 0000:1b:01.3: scsi6:0:2:10: DEVICE
RESET ISSUED.
Feb 7 12:17:17 xenserver-2 kernel: qla4xxx 0000:1b:01.3: scsi(6:0:2:10):
DEVICE RESET SUCCEEDED.
Feb 7 12:17:17 xenserver-2 kernel: qla4xxx 0000:1b:01.3: scsi(6:0:2:10): HOST
RESET ISSUED.
Feb 7 12:17:24 xenserver-2 kernel: qla4xxx 0000:1b:01.3: Configuring PCI
space...
Feb 7 12:17:24 xenserver-2 kernel: qla4xxx 0000:1b:01.3: Configuring PCI
space...
Feb 7 12:17:24 xenserver-2 kernel: qla4xxx 0000:1b:01.3: Configuring NVRAM ...
Feb 7 12:17:24 xenserver-2 kernel: qla4xxx 0000:1b:01.3: Starting firmware ...
Feb 7 12:17:26 xenserver-2 kernel: qla4xxx 0000:1b:01.3: 6 firmare IOCBs
available (224).
Feb 7 12:17:26 xenserver-2 kernel: qla4xxx 0000:1b:01.3: Initializing
firmware..
Feb 7 12:17:29 xenserver-2 kernel: qla4xxx 0000:1b:01.3:
qla4xxx_isr_decode_mailbox: LINK UP
Feb 7 12:17:29 xenserver-2 kernel: scsi6: AEN 8029, mbox_sts[2]=0003,
mbox_sts[3]=0005
Feb 7 12:17:31 xenserver-2 kernel: qla4xxx 0000:1b:01.3: 6 firmare IOCBs
available (224).
Feb 7 12:17:31 xenserver-2 kernel: qla4xxx 0000:1b:01.3:
qla4xxx_get_fwddb_entry: DDB[2] MB0 4000 Tot 1 Next 0 State 0004 ConnErr
00000000 10.0.69.1 :3260 "iqn.2011-02.servers.nas1:xenstore"
Feb 7 12:17:31 xenserver-2 kernel: qla4xxx 0000:1b:01.3: HOST RESET SUCCEDED.
Feb 7 12:17:31 xenserver-2 kernel: qla4xxx 0000:1b:01.3: qla4xxx_status_entry
invalid status entry: handle=0x0
Feb 7 12:17:38 xenserver-2 kernel: qla4xxx 0000:1b:01.3: Configuring PCI
space...
Feb 7 12:17:38 xenserver-2 kernel: qla4xxx 0000:1b:01.3: Configuring PCI
space...
Feb 7 12:17:38 xenserver-2 kernel: qla4xxx 0000:1b:01.3: Configuring NVRAM ...
Feb 7 12:17:38 xenserver-2 kernel: qla4xxx 0000:1b:01.3: Starting firmware ...
Feb 7 12:17:40 xenserver-2 kernel: qla4xxx 0000:1b:01.3: 6 firmare IOCBs
available (224).
Feb 7 12:17:40 xenserver-2 kernel: qla4xxx 0000:1b:01.3: Initializing
firmware..
Feb 7 12:17:44 xenserver-2 kernel: qla4xxx 0000:1b:01.3:
qla4xxx_isr_decode_mailbox: LINK UP
Feb 7 12:17:44 xenserver-2 kernel: scsi6: AEN 8029, mbox_sts[2]=0003,
mbox_sts[3]=0005
Feb 7 12:17:46 xenserver-2 kernel: qla4xxx 0000:1b:01.3: 6 firmare IOCBs
available (224).
Feb 7 12:17:46 xenserver-2 kernel: qla4xxx 0000:1b:01.3:
qla4xxx_get_fwddb_entry: DDB[2] MB0 4000 Tot 1 Next 0 State 0004 ConnErr
00000000 10.0.69.1 :3260 "iqn.2011-02.servers.nas1:xenstore"
Feb 7 12:18:26 xenserver-2 kernel: qisioctl6: ql4_scsi_passthru: ERROR =
command timeout.
Feb 7 12:18:26 xenserver-2 kernel: qla4xxx 0000:1b:01.3: scsi6:0:2:11: DEVICE
RESET ISSUED.
etcetera...
Upgrading the module to v5.02.07.02.05.06-c0 resolved this issue.
Cheers,
Ludo
_______________________________________________
xen-api mailing list
xen-api@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/mailman/listinfo/xen-api
|
<Prev in Thread] |
Current Thread |
[Next in Thread> |
- [Xen-API] update needed for qla4xxx driver on xcp1.0beta,
Nomen Nescio <=
|
|
|
|
|