uuid ( RO)                        : 558dcfdb-9edf-e9cb-a203-9666d9d955e4
                     vm-uuid ( RO): fceed081-ffca-6057-7cc8-35a9e5ad7d76
               vm-name-label ( RO): buildvm
          allowed-operations (SRO): attach; unplug
          current-operations (SRO): 
                      device ( RO): 0
                         MAC ( RO): ee:56:a1:5e:59:03
           MAC-autogenerated ( RO): true
                         MTU ( RO): 1500
          currently-attached ( RO): true
          qos_algorithm_type ( RW): 
        qos_algorithm_params (MRW): 
    qos_supported_algorithms (SRO): 
                other-config (MRW): 
                network-uuid ( RO): 1b4e6c7a-5aeb-120b-5888-4663f3af479c
          network-name-label ( RO): Pool-wide network associated with eth0
                 io_read_kbs ( RO): <expensive field>
                io_write_kbs ( RO): <expensive field>
I've set IP to domU. But I just can ping dom0 IP.
2010/7/13 Dave Scott 
<Dave.Scott@xxxxxxxxxxxxx>
Hi Sergio,
 
Could you show the output of 
 
xe vif-list vm-uuid=<your VM uuid> params=all
 
There should be a VIF object linking the specific VM to the
specific Network. Once that’s plugged in (either ‘xe vm-reboot’/’xe vm-start’
or ‘xe vbd-plug’) then inside the guest you can configure the IP address.
 
Cheers,
Dave
 
 
 
Hi,
I tried to create a vif under xenbr0 then assigned mannually
a IP address and to create a vif under xapi0. But in both cases I can ping only
dom0 IP.
 
-- 
Sergio Roberto Charpinel Jr.
 
  
 
 
-- 
Sergio Roberto Charpinel Jr.